RC4WD Gelande II User manual

1/10 SCALE 4x4 TRUCK KIT

RC4WD G2
rc4wd.com
ii
Recommended Tools
Hex Drivers (1.5mm, 2mm, 2.5mm)
Thread Lock Cross Wrench
Long Nose Pliers
Tips for Assembly
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Note: Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.

RC4WD G2
rc4wd.com
iii
RC4WD Limited Warranty
All RC4WD products are warranted to be free of defects in materials and
workmanship when new. Our limited warranty does not cover damages due to
normal wear and tear, user error of assembly or installation, user
modifications, user's failure to perform routine maintenance, addition of
aftermarket parts or option parts. This warranty lasts as long as the original
purchaser owns the product. In the event of a defect under this warranty,
RC4WD will, at our discretion, replace the product, provided our inspection
indicates that an original defect exists. RC4WD reserves the right to replace
any product which is no longer available with a product of comparable value
and function. If RC4WD determines the repair is not covered under warranty
guidelines, we will contact you to discuss your options. If you have any
questions, please contact us via email at [e-mail].

RC4WD G2
rc4wd.com
1
All of the hardware should be taken from Bag E
Parts can be found in Metal Parts Bag F
1 *
2 *

RC4WD G2
rc4wd.com
2
3 *
4 *
Plastic parts can be found in parts Bag G
5

RC4WD G2
rc4wd.com
3
6
7 *

RC4WD G2
rc4wd.com
4
8 *
9 *

RC4WD G2
rc4wd.com
5
10 *
This step should be done on both frame rails
11 *
12 *

RC4WD G2
rc4wd.com
6
13 *
14 *

RC4WD G2
rc4wd.com
7
15 *
16 *
17 *