RCA ViSYS 25110 User manual

2.4 Ghz Cordless Telephone
and Wireless Headset with
Call-Waiting/Caller ID
User’s Guide
Please read this manual
before operating this
product for the first time.
Model 25110

2
Equipment Approval Information
Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68,
FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
You must, upon request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone
number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of
devices you may connect to your line as determined by the REN, you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your
local telephone company.
• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm
equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
US NUMBER IS LOCATED ONTHE CABINET BOTTOM
REN NUMBER IS LOCATED ONTHE CABINET BOTTOM
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you
that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone
company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify
you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the
Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the
operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your
telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.
Important Information

3
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference;
and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions.
Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is
available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Hearing Aid Compatibility
This telephone system meets FCC standards for Hearing Aid Compatibility.
Licensing
Licensed under US Patent 6,427,009.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be
co-located or operated in conjunction with any other antenna or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied
with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Important Information

4
Table of Contents
EquipmEnt ApprovAl informAtion .................................................. 2
intErfErEncE informAtion.............................................................. 3
HEAring Aid compAtibility ............................................................ 3
licEnsing ..................................................................................... 3
fcc rf rAdiAtion ExposurE stAtEmEnt ......................................... 3
introduction ................................................................................ 6
pArts cHEcklist............................................................................ 7
importAnt instAllAtion informAtion............................................... 8
Safety PrecautionS..................................................................................8
inStallation GuidelineS ...........................................................................8
tElEpHonE JAck rEquirEmEnts........................................................ 9
pHonE instAllAtion..................................................................... 10
connectinG the ac (electrical) Power.............................................. 10
Charger unit............................................................................................. 10
Wall base unit ......................................................................................... 10
connectinG the telePhone line............................................................ 10
inStallinG the BatterieS ........................................................................11
Installing the Handset Battery............................................................11
Installing the Headset Battery...........................................................12
HEAdsEt sEt up.......................................................................... 13
headBand attachment ......................................................................... 13
To switch from ear to ear ....................................................................14
ear cliP attachment............................................................................ 15
To switch from ear to ear ....................................................................15
HAndsEt lAyout ......................................................................... 16
HEAdsEt lAyout.......................................................................... 17
HAndsEt sEt up......................................................................... 18
diSPlay lanGuaGe ................................................................................. 18
tone/PulSe dialinG .............................................................................. 18
area code.............................................................................................18
rinGer tone.......................................................................................... 19
rinGer Volume ..................................................................................... 19
default SettinG Selection.................................................................... 19
tElEpHonE opErAtion .................................................................. 20
makinG acall...................................................................................... 20
On the Handset.......................................................................................20
On the Headset....................................................................................... 20
anSwerinG a call................................................................................ 20
On the Handset.......................................................................................20
On the Headset....................................................................................... 20
call tranSfer ....................................................................................... 21
mute ..................................................................................................... 21
redial.................................................................................................... 21
flaSh..................................................................................................... 22
exit........................................................................................................ 22
handSet Volume................................................................................... 22
headSet Volume ...................................................................................22
To Adjust Volume from Headset:.......................................................22
To Adjust Volume from Handset: ......................................................22

5
Table of Contents
PaGinG the handSet and headSet........................................................ 23
inuSe indicator liGht ......................................................................... 23
On the Handset.......................................................................................23
On the Headset....................................................................................... 23
charGer indicator liGht ...................................................................... 23
call timer ............................................................................................ 24
temPorary tone dialinG ......................................................................24
cAllEr id .................................................................................. 25
caller id with call waitinG .............................................................. 25
receiVinG and StorinG callS ............................................................... 25
reViewinG recordS............................................................................... 25
tranSferrinG cid recordS to memory .............................................. 26
deletinG recordS ................................................................................. 26
Deleting the Current Record .............................................................. 26
Deleting All Records..............................................................................27
dialinG acaller id numBer ...............................................................27
chanGinG the cid numBer format ....................................................27
mEmory .................................................................................... 28
StorinG aname and numBer in memory........................................... 28
ViewinG aStored numBer ................................................................... 29
chanGinG aStored numBer ................................................................29
StorinG aredial numBer .................................................................... 29
dialinG aStored numBer.................................................................... 30
inSertinG aPauSe in the dialinG Sequence of aStored numBer...... 30
reViewinG and deletinG Stored numBerS...........................................30
HEAdsEt And bElt clip opErAtion ................................................ 31
connectinG an oPtional headSet to the handSet.............................. 31
attachinG the Belt cliP ....................................................................... 31
rEplAcing tHE bAttEriEs .............................................................. 32
handSet Battery................................................................................... 32
handSet memory retention ...............................................................32
headSet Battery ................................................................................... 33
bAttEry sAfEty prEcAutions ........................................................ 33
displAy mEssAgEs ...................................................................... 34
HAndsEt sound signAls.............................................................. 35
caller id.............................................................................................. 36
No display.................................................................................................36
Caller ID error message ........................................................................36
telePhone.............................................................................................. 36
No dial tone............................................................................................. 36
troublEsHooting tips.................................................................. 37
gEnErAl product cArE ............................................................... 38
cAusEs of poor rEcEption .......................................................... 38
sErvicE ...................................................................................... 39
limitEd WArrAnty ...................................................................... 40
AccEssory informAtion............................................................... 42

6
SEE MARKING ON BOTTOM / BACK OF PRODUCT
RISKOFELECTRICSHOCK
DONOTOPEN
WARNING:TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
CAUTION:
Introduction
CAUTION: When using telephone equipment, there are basic safety instructions that
should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided
with this product and save them for future reference.
Your Caller ID phone stores and displays information provided by your local
telephone company, to subscribers of Caller ID or similar caller identification
services.
Your Caller ID phone enables you to:
• Identify callers before you answer the phone.
• View the time and date of each incoming call.
• Record up to 99 Caller ID messages sequentially.
• Know who called while you were away.
To get the most from your new phone, we suggest that you take a few minutes
right now to read through this user’s guide.
IMPORTANT: In order to use all of the features of this unit, you must subscribe to either the
standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is
calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service.
IMPORTANT: Because cordless phones operate on electricity, you should have at least one
phone in your home that isn’t cordless, in case the power in your home goes out.
Important Information

7
Parts Checklist
Make sure your package includes the following items:
Wall base
Handset Battery
compartment cover
Telephone
line cord
AC power
adaptor
Connections & Setup
ChargerHandset battery Belt clip
Headband Headset battery Ear clip ring
Ear clip
Headset
Headset sponge
cover

8
Important Installation Information
Safety Precautions
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone
line is disconnected from the network.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as faxes,
other phones, or modems.
Installation Guidelines
• Install the wall base unit into an electrical outlet that is near a telephone
(modular) jack.
• Avoid sources of noise, such as a window by a busy street, and electrical noise,
such as motors, microwave ovens, and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances, radiators, and
direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
Connections & Setup

9
Modular telephone
line jack
Wall plate
Connections & Setup
CAUTION: Always disconnect all phone cords from the base unit before battery
installation or replacement.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause
or receive interference with , microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on top of a TV,
microwave ovens, or VCR. If such interference continues, move the cordless telephone farther
away from these appliances. Certain other communications devices may also use the 2.4GHz
frequency for communication, and, if not properly set, these devices may interfere with each
other and/or your new telephone. If you are concerned with interference, please refer to
the owner’s manual for these devices on how to properly set channels to avoid interference.
Typical devices that may use the 2.4GHz frequency for communication include wireless
audio/video senders, wireless computer networks, multi-handset cordless telephone systems,
and some long-range cordless telephone systems.
Telephone Jack Requirements
To use this phone, you will need an RJ11C type modular phone jack, which might
look like the one pictured here, installed in your home. If you don’t have a modular
jack, call your local phone company to find out how to get one installed.

10
Phone Installation
Connecting the AC (Electrical) Power
Charger unit
Plug the AC power adaptor into an electrical outlet and the DC connector into the
bottom of the charger.
CAUTION: Only use the 5-2678 power adaptor that came with this unit. Using other
power adaptors may damage the charger unit.
Wall base unit
To install your wall base unit, locate an electrical outlet with a phone jack nearby.
1. Plug the wall base unit into an electrical outlet.
2. Make sure that the pins are inserted fully and firmly into the outlet. If not,
choose another electrical outlet.
Connecting the Telephone Line
There are two jacks on the bottom of the wall base unit.
Plug one end of the telephone line cord into the LINE jack on the bottom of the
wall base unit and the other end into a modular jack.
The PHONE jack may be used to connect a parallel phone by connecting a second
telephone line cord from the PHONE jack on the bottom of the wall base unit to the
parallel phone.
Connections & Setup