RCA 25420 User manual

25420
Installing Your Phone
To install using two 2-line phone jacks and two 2-line phone cords
(included with your phone):
To install using four single-line phone jacks and two 2-line couplers:
Using the 25420 with your RCA 4-line system:
After you plug the phone lines into your 25420, it will automatically
search for other RCA 4-line phones.
When it finds the other phones, it is assigned a
unique extension number between 1 and 16.
This will be the number used for intercom calls
and when the auto attendant on the RCA 25425RE1
directs calls.
If you would like more information on changing the extension number of
your 25420, please see page 18 of your instruction booklet.
Note: the 25420 works with RCA 4-line models 25413RE3, 25414RE3, 25415RE3,
25423RE1, 25424RE1 and 25425RE1.
(03) STATION
00 NEW CALLS
NOTE: Make sure that the phone line being used as Line 1 is the same on each
phone in your system.

Menu, Format/Redial,
Select/Save
Delete/Mute,
Do Not Disturb,
Line Select
Vol +/Vol -
Intercom/Call Transfer,
Call Conference,
Store Number
Hold, Flash/Exit Line In Use Indicators
Page/Volume
Charge Indicator
Visual Ring Indicator
DND
DND
SOUND SETTINGS
PHONE SETTINGS
DELAY RING
PHONE ID
Press SELECT or
Any Digit Keys
1. Use the Vol (+ or -) buttons to scroll up or
down to PHONE SETTINGS.
2. Press the Sel/Save button.
3. Use the Vol (+ or -) buttons to scroll up
or down to PHONE ID.
4. Press the Sel/Save button.
5. Press the Sel/Save button again to automatically
set the phone ID, or use the keypad to enter
your desired phone ID.
Setting Your Phone ID
DND
1. Use the Vol (+ or -) buttons to move
the arrows in menus.
2. Use menu to access the menu.
3. Use Select/Save to enter submenus
and to save settings.
4. Use exit to go back one menu level.