RD RDC6585PC User manual

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
RDC6585PC
Control System manual V1.0
Read this manual before operation
The content include of electric connections and operating steps
Read the manual to operate the systems
RuiDa Technology Co., Ltd
Addr: 3th floor,Technology Building,NO.,1067 Nanhai
Avenue,Nanshan District,Shenzhen city,Guangdong
Province,P.R.China
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.rd-acs.com
https://www.ruidacontroller.com

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
COPYRIGHT
All rights reserved.You may not reproduce, transmit, store in a
retrieval system or adapt thispublication, in any form or by any means,
without the prior written permissionof RuiDa, except as allowed
under applicable copyright laws. We have identifiedwords that we
consider as trademarks. Neither the presence or absence oftrademark
identifications affects the legal status of any trademarks.

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
CERTIFICATION DECLARATION
CE
The product has been certified by the CE (Commutate European) safety certification. It has
passed the corresponding conformity assessment procedure and the manufacturer's
declaration of conformity, in accordance with the relevant EU directive.
ROHS
This product has been certified by EU legislation (Restriction of Hazardous Substances)
Safety certification; comply with relevant EU environmental regulations.
FCC
This product has been certified by the Federal Communications Commission for safety,
Comply with us electronic safety regulations.

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
SAFETY INFORMATION
When using this system, please make sure the operation is correct and the usage is safe.
Some signs or text will be used to remind you to pay attention to the dangerous matters and
some important information.
Dangerous：
Indicates a serious danger. In the process of use, if the operation is
improper or the way of use is wrong, it may cause serious injury or even
death to the user. Please do not operate it easily until you have made sure
that the operation method is correct and the way of use is correct.
Warning：
Danger.n the process of use, if the operation is improper or the use is
wrong, which may lead to the injury of the personnel, please do not
operate the personnel and related personnel easily, until ensure the correct
operation method and use method is correct before use.
Cautious：
Represents the potential risk of the product. In the process of use, if the
use method is wrong or improper operation, it may cause damage to the
product or some parts. Please do not use it until you have made sure that
the operation method is correct and the usage is correct.
Important：
Represents important information to be paid attention to during the use of
the product.Please do not ignore this information, this information will
provide effective operational help.
This sign indicates laser radiation, which is usually posted on products with
laser output. Please be careful with laser and pay attention to safety when
using this kind of equipment.

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
Sign in、Devanning、Examine cargo
The product itself with plastic or metal shell, can protect the external electrical components
from damage. The products are packed in foam bags and anti-static bags. If there is any
external damage to the package, check the equipment and notify the carrier and carrier in
writing of the damage.
Inportant:
After receiving the product, please check whether the outer package is intact,
check whether the product is complete after unpacking and whether all parts
are intact. If any damage is found, please contact ruida immediately.
Remove all cargo from package and keep packing material and wiring parts. Please take care
of the safety of the goods when unpacking them.After taking out the goods, please check
whether the parts are complete and intact. If any missing parts or damaged parts are found,
please contact ruida technology immediately.Do not install or debug the equipment if any
obvious damage is found.

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
CONTENTS
Section 1 Overview......................................................................................................................................1
1.1 BRIEFING..................................................................................................................................................2
1.2 DESCRIPTION OF CONTROLLER MODEL...................................................................................................2
1.3 COMPARISON OF CONTROLLER PERFORMANCE...................................................................................... 2
Section 2 Installation Size.......................................................................................................................... 4
2.1 INSTALLATION SIZE OF MAINBOARD...................................................................................................... 5
2.2 SIZE OF PANEL......................................................................................................................................... 6
Section 3 Object Pictures and Interfaces................................................................................................ 7
....................................................................................................................................................................... 8
3.1 OBJECT PICTURES OF MAINBOARD......................................................................................................... 8
3.2 OBJECT PICTURES OF PANEL................................................................................................................... 9
3.3 ELECTRIC CONNECTION..........................................................................................................................10
3.4 LAMP INSTRUCTION................................................................................................................................11
3.5 FUNCTION DISTRIBUTION OF ALL EIGHT AXES.......................................................................................12
Section 4 Description of Interface Signal for MainBoard.................................................................... 13
..................................................................................................................................................................... 15
4.1 INTERFACE OF MAIN POWER SOURCE CN0...........................................................................................15
4.2 PANEL SIGNAL-CABLE INTERFACE HMI............................................................................................... 15
4.3 UDISK INTERFACE.................................................................................................................................. 15
4.4 PC-USB INTERFACE.............................................................................................................................. 15
4.5 ETHERNET INTERFACE........................................................................................................................... 15
4.6 EXTENDED EQUIPMENT INTERFACE CN1.............................................................................................. 15
4.7 OUTPUT PORT CN2/CN3.......................................................................................................................16
4.8 INPUT PORT CN4................................................................................................................................... 17
4.9 8-AXLE SPACING INPUT INTERFACE...................................................................................................... 18
4.10 X~D AXLE MOTOR DRIVER INTERFACE AXIS_X~AXIS _D..............................................................18
4.11 LASER POWER CONTROL INTERFACE LP1~LP6.................................................................................. 19
Section 5 Examples of Laser Power Interface......................................................................................21
5.1 BRIEF......................................................................................................................................................22
5.2 EXAMPLES OF GLASS TUBE LASER POWER........................................................................................... 22
5.3 EXAMPLES OF RF-LASER.......................................................................................................................23
Section 6 Examples of Driver Interface for Step-servo Motor............................................................24
..................................................................................................................................................................... 24
6.1 BRIEF......................................................................................................................................................25
6.2 EXAMPLES OF MOTOR DRIVER CONNECTION........................................................................................26
Section 7 Examples of Extended Equipment Interface.......................................................................27
7.1 EXAMPLES OF EXTENDED EQUIPMENT INTERFACE............................................................................... 28
Section 8 Operating Instruction of Panel............................................................................................... 28
8.1 BRIEF......................................................................................................................................................29
8.1.1 Overview........................................................................................................................................ 29
8.1.2 Introduction to the Keys.................................................................................................................29
8.1.3 THE MAIN INTERFACE......................................................................................................................... 31

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
8.2 SPEED SETTING...................................................................................................................................... 32
8.3 SET THE LAYER PARAMETERS.................................................................................................................32
8.4 MENU FUNCTION................................................................................................................................... 34
8.4.1 Focusing......................................................................................................................................... 34
8.4.2 Max/Min Power Setting................................................................................................................. 34
8.4.3 User parameters..............................................................................................................................35
8.4.4 Vender parameters.......................................................................................................................... 38
8.4.5 Origin Setting................................................................................................................................. 39
8.4.6 Backup parameters......................................................................................................................... 41
8.4.7 Restore parameters......................................................................................................................... 42
8.5 CONTROLLER SETTING........................................................................................................................... 42
8.5.1 Language........................................................................................................................................ 42
8.5.2 Screen origin...................................................................................................................................43
8.5.3 Wireless panel.................................................................................................................................44
8.5.4 IP Setting........................................................................................................................................ 44
8.5.5 System Info.....................................................................................................................................45
8.6 FUNTIONS...............................................................................................................................................45
8.6.1 Axis reset........................................................................................................................................ 46
8.6.2 Keyboard lock................................................................................................................................ 46
8.6.3 Manual setting................................................................................................................................ 47
8.6.4 Laser Setting...................................................................................................................................47
8.6.5 Spray setting...................................................................................................................................48
8.6.6 Drip setting..................................................................................................................................... 49
8.6.7 Diagnose.........................................................................................................................................49
8.6.8 Laser power infomation................................................................................................................. 50
8.7 FILE MANAGEMENT...............................................................................................................................51
8.7.1 Memory File...................................................................................................................................51
8.7.2 Array info....................................................................................................................................... 52
8.7.3 Feeding para................................................................................................................................... 53
8.7.4 Memory operation.......................................................................................................................... 54
8.7.5 Format memery.............................................................................................................................. 54
8.7.6 U disk file....................................................................................................................................... 55
8.8 PASSWORD INPUT AND SETTINGS...........................................................................................................56
8.8.1 Password Input............................................................................................................................... 56
8.8.2 Password Setting............................................................................................................................ 56
8.9 PROMPT AND ALARM INFORMATION......................................................................................................57
Section 9 Manufacturer/User Parameters Explanation.......................................................................58
9.1 MANUFACTURER PARAMETERS..............................................................................................................59
9.2 USER PARAMETERS................................................................................................................................ 63

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
1
Section 1 Overview
CONTENTS:
Briefing
Description of
Controller Model
Comparison of
Controller Performance

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
2
1.1 Briefing
RDC6585PC system is a new generation of spray cutting integrated control system developed
by Ruida technology. The man-machine operating system based on 5-inch color screen has more
friendly operation interface and more powerful functions. The controller has perfect and
excellent motion control function, which can realize laser processing and glue spraying processing
respectively by layers. The control system has multiple general / special IO control interfaces and
multiple peripheral interconnection interfaces.
The controller can be used for single path laser + glue spraying processing, and can also be
used to drive single / multiple belt type double head mutual moving machine. At most, it can
realize mutual moving processing of two paths laser and mutual moving processing of two paths
glue spraying by layers.
1.2 Description of Controller Model
1.3 Comparison of Controller Performance
RDC6585PC
Power
Feature
Only one-way 24V
Laser Port
Feature
Six-way digits port, settable independently and
non-interacted
USB
Feature
Copying Speed
Very High
Compatibility
Support all USB disks with different capacities
Memory
Capacity
256M

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
3
Feature
Fault Tolerance
Capable of checking defective track and formatting and
good in fault tolerance
General IO
Feature
Input Port
Multiple dedicated + general input (compatible with 5 /
12 / 24V logic level)
Output Port
Multiple dedicated + general output (drive capacity
500mA, OC output, continuous current protection)
Software
Feature
Power-off restart for Engraving
YES
Multi-origin Logics
YES
Parameter Backup Logics
YES
Work time Preview
YES (the work time accurate to 1ms)
Online Update Mainboard Program
YES
Display
Feature
Online Modification Laser Power/Speed
YES
Offline Modification Layer parameters
YES
Online Update Startup Display
NO
File dynamic/static preview
YES
Run progress bar display
YES
Modification Factory/User’s para on
display
Yes
Display type
320*480 TFT display
Motion-axl
e Feature
Soft Spacing
YES
Hard Spacing
YES
Feeding Feature
Single/double direction for option
Power-on Resetting
Configurable for each axes
Key Speed
Configurable
Axles
8
Robotization Multi-X axes
Support
2
Belt of Multi-X axes
Single or Multi- Belt
Encryption
Feature
encryption included
Communic
ate
Mode
10/100MHZ Ethernet or USB2.0, communication mode
is automatically checked
Extended
Communic
ation Ports
Two ways
For wireless handset, EPLC400 or other equipment
Phone App
Support
YES

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
4
Section 2 Installation
Size
CONTENTS:
Installation Size of
MainBoard
Size of Panel

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
5
2.1 Installation Size of MainBoard
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm (the four holes are
symmetrical)
Figure 2.1-1

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
6
2.2 Size of Panel
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm.
Figure 2.2-1

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
7
Section 3 Object
Pictures and Interfaces
CONTENTS:
Object Pictures of
MainBoard
Object Pictures of
Panel
Electric connection
Lamp instruction
Function distribution
of all eight axes

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
8
3.1 Object Pictures of MainBoard
For more detailed pin description, see the Chapter 4: Description of Interface Signal for
MainBoard.
Figure: 3.1-1 Object Picture of MainBoard

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
9
3.2 Object Pictures of Panel
Figure: 3.2-1 Object Picture of Panel

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
10
3.3 Electric connection
Figure 3.3-1 electric connection

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
11
3.4 Lamp instruction
RDC6585PC have thirty three red lamps:
LED NUMBER
NAME
SENSE
LED1
LmtX-
Xnegative limit indicator
LED2
LmtX+
Xpositive limit
LED3
LmtY-
Ynegative limit
LED4
LmtY+
Ypositive limit
LED5
LmtZ-
Znegative limit
LED6
LmtZ+
Zpositive limit
LED7
LmtU-
Unegative limit
LED8
LmtU+
Upositive limit
LED9
LmtA-
Anegative limit
LED10
LmtA+
Apositive limit
LED11
LmtB-
Bnegative limit
LED12
LmtB+
Bpositive limit
LED13
LmtC-
Cnegative limit
LED14
LmtC+
Cpositive limit
LED15
LmtD-
Unegative limit
LED16
LmtD+
Upositive limit
LED17
Wp1
the first water protection
LED18
Wp2
the second water protection
LED19
Wp3
Reserved
LED20
Wp4
Reserved
LED21
Wp5
Reserved
LED22
Wp6
Reserved
LED23
Lon1
the first Laser Splash
LED24
Lon2
the second Laser Splash
LED25
Lon3
Reserved
LED26
Lon4
Reserved
LED27
Lon5
Reserved
LED28
Lon6
Reserved
LED29
Act
Ethernet communication
LED30
Link
Ethernet connection
LED31
Err
error in controller hardware
LED32
Run
the normal running status
LED33
+5V
+5V power supply

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
12
3.5 Function distribution of all eight axes
The function distribution of all eight axes is as below:
Single Roboticized X axes
Double Roboticized X axes
X
Axes
Used to control the left and right moving or
laser header
Used to control the left and right moving or the
first laser header
Y
Axes
Used to control the up and down moving or
laser header
Used to control the up and down moving or
laser header
Z
Axes
May be mapped to put up and down axes in
Layer parameter in PC software
Used to control the left and right moving or the
second laser header
U
Axes
Used to control feed in Axes
Used to control feed in Axes
A
Axes
Up and down control of the first nozzle (in
case of motor mode)
Up and down control of the first nozzle (in case
of motor mode)
B
Axes
May be mapped to put up and down axes in
Layer parameter in PC software
Up and down control of the second nozzle (in
case of motor mode)
C
Axes
Used to Rotating Cut
Used to Rotating Cut
D
Axes
Used to Auto-Focus
Used to Auto-Focus

RDC6585PC Control System manual V1.0
SHENZHEN RUIDA TECHNOLOGY
13
Section 4 Description
of Interface Signal for
MainBoard
CONTENTS:
Interface of Main
Power Source CN0
Panel Signal-Cable
Interface HMI
Udisk Interface
PC-USB Interface
Ethernet Interface
Extended Equipment
Interface CN1