Reach Rio RZ303 User manual

1

2
Welcome
Dear customer:
Thank you for choosing our Rio RZ303 mobile phone. This mobile phone incorporates the latest
world advanced functions, enabling simple and convenient operation, satisfying your special
requirements.
The mobile phone supports Memory card and Dual SIM standby. It integrates the following
available functions: SMS, MP3, MP4, Camera, FM radio, Alarm, Video recorder and Calendar,
enabling you arranging your work, study and life freely; with long standby duration, as well as
service and calculator, your communication will be easier and smoother; powerful File manager
allows you to manage the files conveniently. In addition, the chord ringtone allows you
selecting music to set as ringtone; the personalized appearance also can satisfy your selection.
Note: User Manual is used to guide the user about the functionality of the phone. Some
functions may vary due to modifications and up gradations of software or due to print mistakes.
Safety Precautions
Operate Safely:
•Make sure to charge the battery full for the first time usage.
•Keep the mobile phone at least in inch away from your body while dialing/ answering
calls.
•Do not use the mobile phone if the screen is Cracked or Broken. Cracked or Broken
screen could cause injury to your hand or face.
•To reduce the risk of motion injuries:
•While using your mobile phone, hold it with a relaxed grip and press the keys lightly.
•Do not handle the mobile phone with wet hands.
•Use of special keys / features reduce the number of keys presses
•Take regular breaks in between calls.
•Use hands-free accessories
•Switch off the mobile phone before cleaning it.
•Switch off the mobile phone and external power sources before any attempt to
change batteries, SIM Cards or any other accessories.
•Keep your mobile phone and all accessories out of reach of small children and
animals.

3
Careful handling:
•Avoid potential damage to your mobile phones as under:
•Keep away from liquids.
•Avoid using storing in dusty and dirty places environments.
•Do not drop, knock, throw or otherwise handle the mobile phone roughly.
•Avoid exposing your mobile phone or batteries to extreme temperatures. Extreme
temperatures reduce the charging capacity and life of batteries and mobile phone.
•Never use damaged chargers or batteries.
•Do not use chemicals or other cleaning solutions to clean the mobile phone.
•Use moist or anti-static cloth.
•Avoid using mobile phone with camera flash or light close to the eyes.
•Do not dismantle the mobile phone and accessories without permission.
•Handling by unauthorized personnel.
Turn Off In Restricted Area
Use of mobile phones in certain area / places / conditions can be hazardous.
•Switch off your mobile phone:
•Inside aircrafts;
•In medical hospitals / clinics;
•Areas where chemicals are used or stored;
•Fuel and gas stations;
•In and around areas having electrical / electronic equipments;
•Areas where any kind of blasting activity is being carried out.
•Removing, installing or charging mobile phone batteries in such areas is hazardous as
potential sparks may result in explosion and fire and may cause damage to property and
or life and can also prove fatal.
Driver Safety
Avoid using your mobile phone while driving and respect and obey all regulations that restrict
the use of mobile phones while driving. Primary consideration while driving should be safety.
Interference with Electronics Devices
Mobile phones emit Radio Frequency (RF) signals that may interfere with unshielded or
improperly shielded electronic equipments, such as pace makers, hearing aids, other medical

4
devices and other electronic devices in homes and vehicles may prove to be hazardous.
Protect Your Hearing
Excessive exposure to high volumes may cause hearing problem. Maintain proper volume levels
for conversations and music.
SAR (Specific Absorption Rate) Information
Telecommunications standard prevent the sale of mobile phones that exceed a maximum
exposure level know as SAR of 2.0 W/kg. During testing, the maximum SAR recorded for this
model is below 1g
In order to use mobile phone correctly, please read the following statement of the user
manual carefully before using the mobile phone.

5
Index
1. Getting Started .5
1.1 Installing the SIM Cards and Battery .5
1.2 Installing / Removing Memory Card .6
1.3 Charging the Battery .6
1.4 Power ON/OFF the Mobile Phone .7
1.5 Linking to the Network .7
1.6 Dialing Calls .7
1.7 Using the Headset .8
2. Call logs (Same for both SIM1 and SIM2) .9
3. Phonebook .9
4. Profiles .9
5. Camera .9
6. Messages .10
7. Multimedia .10
8. Audio player .11
9. Organizer .11
10. Bluetooth .12
11. Settings .12
12. Services .14
13. Fun & Games .14

6
1. Getting Started
1.1 Installing the SIM Cards and Battery
A SIM card carries useful information, including your mobile phone number, PIN (Personal
Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2(PIN2 Unlocking Key), IMSI
(International Mobile Subscriber Identity), network information, contacts data, and short
messages data.
Note:
After switching off your mobile phone, wait for few seconds before removing or inserting an
SIM card. Exercise caution when operating a SIM card, as friction or bending will damage the
SIM card.
Installation
•Hold the Power key for while to power off the mobile phone
•Slide or Pull the back cover and remove it
•Pull the battery outward and then lift the battery way
•Insert the SIM card into the SIM card slot lightly with proper alignment of the Slot.
•Keep the positive pole and negative pole of battery connector of the mobile phone,
and press the battery gently to install the battery.
Using Code
The mobile phone and the SIM cards support sorts of passwords, in order to prevent the phone
and the SIM cards from being misused. When you are prompted to input any of the codes
mentioned below, just input the correct code and then press the OK key. If you input a wrong
code, press the Right soft key to clear it and then input the correct code.
Phone lock code
The phone lock code may be set to prevent your mobile phone from being misused. In general,
this code is provided along with the mobile phone by the manufacturer. The initial phone lock
code is set to 732237 by the manufacturer. If the phone code is set, you need to input the
phone lock code when powering on the mobile phone.
PIN
The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being
used by unauthorized people. In general, the PIN is supplied with SIM card by the network
operator. If PIN check is enabled, you need to input the PIN each time when you power on your
mobile phone. The SIM card will be locked if you input wrong PIN code for three times.

7
Unlocking methods as follows:
•Input the correct PUK according to the screen tips to unlock the SIM card.
•Then input the new PIN and press the OK key.
•Input the new PIN again and then press the OK key.
•If the input PUK is correct, the SIM card will be unlocked and the PIN will be reset.
Note: The SIM card will be locked if you input wrong PIN code for three times. To unlock the
SIM card, you need to input the PUK. In general, the PUK can be obtained from the network
operator.
PUK
The PUK code (Personal Unlocking Key, 8digits) is required to change a blocked PIN. It is
supplied with SIM card. If not , contact your network operator. If you input wrong PUK code for
10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card.
Barring code
A barring code is required for setting the call barring function. You can obtain this code from
the network operator to set the call barring function.
1.2 Installing/ Removing Memory Card
The memory card is a pluggable mobile storage card inside the mobile phone. To install the
memory card, open its latch, insert the card into the card slot, and then close the latch. To
remove the memory card, open its latch and remove the card carefully.
1.3 Charging the Battery
The lithium battery delivered with the mobile phone can be put into use immediately after
being unpacked. A new battery will have maximum performance after the first three full
charge/Discharge cycles.
Battery level indication
•Your mobile phone can monitor and display the battery state.
•Normally the remaining energy of the battery is indicated by the battery level icon at
the upper right corner of the display screen.
•When the battery energy is insufficient, the mobile phone prompts “Battery low”. If
you have set an alert tone, an alert tone will be given off when the battery level is
too low.
•A charging animation appears when the battery is being charged. When the charging
is complete, the animation disappears.

8
Using a travel adapter:
•Install the battery into the mobile phone before charging the battery.
•Connect the charging pin in the charging socket of the mobile phone
•Insert the plug of the travel charger to an appropriate power outlet.
•During the charging, the battery level grids in the battery icon keep flickering till the
battery is fully charged.
•It is normal of the battery to become hot during the charging period.
Note
Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are
inserted in the right direction. Inserting them in a wrong direction may cause charging failure or
other problem. Before the charging, ensure that the standard voltage and frequency of the
local mains supply match the rated voltage and power of the travel charger.
Using the battery
The performance of a battery is subject to multiple factors: radio network configuration, signal
strength, ambient temperature, chosen functions or setting, device attached to the phone, and
the voice, data or other application mode you choose to us.
1.4 Powering ON/ OFF the Mobile Phone
Hold the Power key for a while to power on the mobile phone. A power-on animation appears
on the display screen. Input the phone lock code and press the OK key if the mobile phone
prompts you to input the phone lock code. The default code is 732237. Input the PIN and
press the Ok key if the mobile phone prompts you to input PIN. The PIN is provide by the
network operator for few opening SIM card. Enter the standby interface. To power off the
mobile phone, hold the Power key for a while.
1.5 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone
automatically searches for an available network. After finding a network, the mobile phone
enters the standby state. When the mobile phone is registered in the network, the name of the
network operator is displayed on the screen. Then you can dial or received a call.
1.6 Dialing Calls
In the standby interface, press the keypad icon to input the area code and the telephone
number, and then press the Dial key to dial a call. To end the call , press the End key.

9
•Dialing an international call
Press * in virtual keypad to input “+”. Then input the country code, the area code
and the telephone number. Finally, press the Dial key.
•Dialing an extension
Input the main number, press the * key for three or four times, input “p” or “w” and
then the extension number, and finally press the Dial key.
•Dialing a call to a number in the phonebook
Enter the phonebook to find the telephone number you want to call. Press the Dial
key. The mobile phone automatically dials the chosen telephonic number.
•Redialing the last number
In the standby interface, press the dial key to show the dialed calls. Select a number
you want to dial and then press the Dial key.
•Adapting volume
During a conversation, you can press the UP/ Down keys to tune the sound volume.
•Answering incoming calls
Press the Dial key to answer an incoming call. Press the End key to end the current
conversation. To reject an incoming call, press the End key.
Note: If the caller can be identified, the mobile phone will present the calling
number. If the calling number exists in the phonebook, the mobile phone will
present both the name and the phone number of the caller. If the caller cannot be
identified, the mobile phone will present the calling number only. You can answer an
incoming call when using a function list or browsing the phonebook.
•Using option during conversation
Select Options during a conversation to hold, end the ongoing call, originate a new
call, browse the phonebook, Send message, set the mute, or perform other
operations. For details, refer to the menu guide.
1.7 Using the Headset
It would enter headset mode automatically when you insert headset to the
headphone jack. Make sure of inserting it at the bottom of the slot, or you can’t use
it normally.

10
2. Call Logs (Same for both SIM1 and SIM2)
Display your recent call records. Call records displays calls including Missed calls, Dialed calls,
Received calls and Rejected calls.
Using this function along with viewing your calls list you can Call, Send SMS, Delete a particular
number or all numbers from the Call Log.
•Call timers: - You can view the duration of your calls using the following operations:
Last Call: To view the duration of your last call
Total Dialed calls: You can view the duration of all the calls you have made.
Total Received calls: You can view the total duration of the calls that you received in your phone.
Reset all: Reset all the all duration to zero
•Text msg. Counter: To view the total number of messages sent and received from your
phone.
Note: Same option for Dialed calls, received calls and missed calls
3. Phonebook
You can save names and phone numbers (Phonebook) to the Phone memory or SIM card
memory; Contacts saved in Phone memory are marked with and contacts saved to the SIM
memory are marked with Select [Contacts]> [Add Number]: Select where you wish to save
the contact from Phone memory or SIM card and add the contact details. Input the name you
want to search and then search it in contacts to find its best match. After selecting the
telephone number in the contacts, Press options to perform more operations like calling the
selected contact, send message, Delete, copy and more.
Note: Phones book settings can also be edited in this Menu
4. User profiles:
User profiles define how your phone reacts when you receive a call or a message, how your
keypad sounds when you press the screen, and more. Each of the available profiles can be
left at their default setting or customized to suit your needs. Select and customize the most
suitable profile for your situation. The available modes are General, Silent, Power save mode,
Meeting & Outdoor.
5. Camera:
This function enables you to take the picture you want. Roll the phone to align the camera to the
picture and then press OK key or the camera key. Use Up and volume down buttons to zoom in
and zoom out respectively .The picture will be stored in the default set path. On the camera
interface you get Settings, Photo-viewer, and more.