REAL AVID SMART DRIVE 90 User manual

SLIDE LOCK
LARGE DRIVER WITH LED
SMALL DRIVER FOR TIGHT SPACES
87 BLACK OXIDE
COATED GUN BITS
POLYCARBONATE LID
SCOPE TURRET TOOL
MAGNETIC PARTS TRAY
SMART DRIVE 90™
90 PIECE GUNSMITHING
KIT WITH FORCE ASSIST™
LED BIT DRIVER.
Smart Drive 90 is an advanced gunsmithing driver set. The main driver
features a magnetic bit holder, rubber grip, jeweler’s spin top & 360° LED
light. It partners with the small “close quarters” driver to create Force
Assist™. Force Assist is a proprietary system that helps users to loosen
frozen-in-place screws as well as precisely tighten screws.
SMALL DRIVER FOR TIGHT
SPACES. DOUBLES AS FORCE
ASSIST LEVER
FORCE ASSIST TECHNOLOGY
HELPS LOOSEN STUCK
SCREWS AND PRECISELY
TIGHTEN SCREWS
RUBBERIZED HANDLES
FOR SURE GRIP
SPIN TOP ON
MAIN DRIVER
“NO SHADOW”
LED ON MAIN
DRIVER
MAGNETIC TIP
HAMMER
SURFACE
FORCE ASSIST LIGHTED
BIT DRIVER SET
RUGGED
CASE WITH
SLIDE LOCKS
360° LIGHT
ILLUMINATES DARK HARD TO SEE SCREWS

5480 NATHAN LANE NORTH, SUITE 120
MINNEAPOLIS, MN 55442 800.286.0567
[email protected] | RealAvid.com
© 2020 REVO BRAND GROUP, LLC.
WARNING: This product can expose you to chemicals including Lead, which is known to the state of California to cause
cancer and birth defects or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
SMART DRIVE 90™
90 PIECE GUNSMITHING KIT WITH FORCE
ASSIST™LED BIT DRIVER.
87 STANDARD & METRIC BLACK OXIDE COATED
GUN BITS
HOLLOW GROUND/SQUARE CUT SLOTTED TIPS
• 3mm Group (9 bits), .5mm-1mm thickness
• 3.8mm Group (4 bits), .7mm-1mm thickness
• 4.7mm Group (4 bits), .6mm-.9mm thickness
• 5.4mm Group (10 bits), .4mm-1.2mm thickness
• 6mm Group (7 bits), .6mm-1.2mm thickness
• 7mm Group (9 bits), .6mm-1.5mm thickness
• 7.6mm Group (5 bits), .8mm-1.5mm thickness
• 8.6mm Group (6 bits), .7mm-1.6mm thickness
• 9mm Group (6 bits), .8mm-1.8mm thickness
TORX: T10, T15, T20, T25 PHILLIPS: PH0, PH1, PH2, PH3
METRIC HEX:
1.5mm, 2mm, 2.5mm,
3mm, 4mm, 5mm, 6mm
STANDARD HEX:
1/16", 5/64", 3/32", 7/64",
1/8", 9/64", 5/32", 3/16",
7/32", 15/64", 1/4"
STANDARD SHAPE
Common hardware bits are tapered & put all of the torque on the top corners
of the screw slot. This commonly results in deformed screws and slippage that
gouges and damages your gun.
HOLLOW GROUND
Gun bits are hollow ground and come in different blade thickness and widths to
perfectly match gun screw slots from top to bottom. This distributes force on the
full bearing surface of the screw slot walls and greatly reduces slippage
and marring.
WHY GUN BITS ARE BETTER THAN HARDWARE BITS
Comprehensive set of premium S2 steel gun bits. Engineered to precisely t gun hardware.
Designed to fail before damaging small, fragile screws and fasteners. Duplicates of most
commonly used slotted bits.
Powerful COB LED light provides 360° no-
shadow illumination
86-1 86-2 86-3 86-4 86-5 86-6 90-1 90-2 90-3 90-4 90-5 90-6 T10 T15 T15 T20 T25
Steel hammer cap on small driver helps break
free frozen screws
86-1 86-2 86-3 86-4 86-5 86-6 90-1 90-2 90-3 90-4 90-5 90-6 T10 T15 T15 T20 T25
3-blade scope turret tool ts all common scope
adjustment slot shapes
86-1 86-2 86-3 86-4 86-5 86-6 90-1 90-2 90-3 90-4 90-5 90-6 T10 T15 T15 T20 T25
86-1 86-2 86-3 86-4 86-5 86-6 90-1 90-2 90-3 90-4 90-5 90-6 T10 T15 T15 T20 T25
Small bit driver inserts into main driver shaft
to provide improved leverage for loosening and
tightening screws