Real-El STAB SLIM-300 User manual

STAB SLIM-300
STAB SLIM-500
STAB SLIM-1000
STAB SLIM-2000
AUTOMATIC VOLTAGE
REGULATOR
OPERATION MANUAL

Technical support www.real-el.com
1
Operation Manual
STAB SLIM
ENG
Congratulations on your purchase of the REAL-EL automatic voltage regulator!
COPYRIGHT
© 2021. ENEL GROUP OU.
This Manual and information contained in are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
1. BUYER RECOMMENDATIONS
ϜUnpack the device carefully. Make sure there are no accessories left in the box. Check up the
GHYLFH IRU GDPDJH LI WKH SURGXFW ZDV GDPDJHG GXULQJ WUDQVSRUWDWLRQ DGGUHVV WKH ԛUP ZKLFK
carried out the delivery; if the product functions incorrectly, address the dealer at once.
ϜCheck up the package contents and availability of the warranty card. Make sure the warranty card
has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods
number corresponds to that in the warranty card. Remember: in case of warranty card loss or
discrepancy of numbers you forfeit the right for warranty repairs.
ϜDo not switch on the device immediately after you bring it into a room from environment with
negative temperature! After unpacking, the device should be kept in conditions of room temperature
for at least 4 hours.
ϜBefore installing and using the device, read this Manual carefully and keep it for future reference.
2. APPLICATION
Automatic voltage regulator (AVR) is designed for providing various equipment with high-quality
VWDEOHHOHFWULFSRZHUVXSSO\LQFRQGLWLRQVRIVLJQLԛFDQWDQGFRQWLQXRXVGHYLDWLRQVRIPDLQVYROWDJH
DQG SURWHFWLQJ FRQVXPHU GHYLFHV DJDLQVW RYHUORDG LQԜXHQFH RI KLJK IUHTXHQF\ DQG LPSXOVH
interferences.
1
1
2
2
3
3
4
4
4
5
5
CONTENTS
1. BUYER RECOMMENDATIONS .................................................................
2. APPLICATION ...................................................................................
3.
SAFETY PRECAUTIONS
......................................................................
4.
PACKAGE CONTENTS
.........................................................................
5. DESCRIPTION ....................................................................................
6. MOUNTING..............................................................................................
7. INSTALLATION .......................................................................................
8.
PAUSE FUNCTION
................................................................................
9.
PROTECTION FUNCTION AGAINST HIGH AND LOW INPUT VOLTAGE, OVERLOAD
AND OVERHEAT
...............................................................................
......
.
10. TROUBLESHOOTING ............................................................................
11. SPECIFICATIONS .................................................................................

Technical support: www.real-el.com
2
Automatic Voltage Regulator
ENG
STAB SLIM
3.
SAFETY PRECAUTIONS
Before using this device, please read the safety rules carefully:
Ϝ It is strongly forbidden to open the cover of the device, there is high voltage inside. If some
problems occur, please read the operation manual carefully and address an authorized service
center. For the list of authorized service centers please go to www.real-el.com.
ϜDo not let liquid get inside the device, it can cause short circuit or electric shock.
Ϝ In case there are signs of improper operation of the device (sparkling, unusual smells, etc.),
unplug the device from the mains immediately and address your nearest authorized service center.
ϜIt is forbidden to connect the automatic voltage regulator to devices with power consumption
higher than its maximum output power. It can cause breakdown of the device.
Ϝ This device is not intended for use by persons (including children) with reduced physical,
mental capabilities, lack of experience or knowledge; use of the device by such persons is
permitted only under the condition of supervision or instructions for the use of household
appliances by persons responsible for their safety.
Ϝ Children should be supervised by authorized personnel to exclude their playing with the
appliance.
ϜDo not use the appliance with a damaged power cord or plug, or after handling liquids, falling
or any other damage. To avoid electric shock, do not attempt to disassemble or repair the
appliance yourself. If necessary, contact a specialized service center.
It is strongly forbidden to operate the device in the following conditions:
–LQGXVW\HQYLURQPHQWRUHQYLURQPHQWFRQWDLQLQJKLJKO\LQԜDPPDEOHJDV
–at temperature higher than 40 °C or lower than 0 °C;
–at humidity level higher than 90 %;
–in direct sunlight or next to heating elements;
–in vibration areas;
–outdoors.
Ϝ,QFDVHRIԛUHXVHRQO\SRZGHUԛUHH[WLQJXLVKHUDVZDWHUFDQFDXVHHOHFWULFVKRFN
ϜThe automatic voltage regulator should be installed in proximity to power supply, then it will be
easier to unplug the device if necessary.
4. PACKAGE CONTENTS
ϜAutomatic voltage regulator – 1 pc
ϜOperation Manual – 1 pc
ϜWarranty card – 1 pc
Features
Ϝ
High precision of output voltage
Ϝ
CPU control
Ϝ
Protection against high or low output voltage
Ϝ
Wall mount Slim design metal case
Ϝ
Wide range of input voltages 150-270 V
Ϝ
Digital displays of input/output voltage
Ϝ
Toroidal transformer with built-in restorable thermal protection
Ϝ
Optional 6s or 180s Switch On Delay time
Caution! There is high voltage inside on the insulation elements which can
result in electric shock.

Technical support: www.real-el.com
3
ENG
Operation Manual
STAB SLIM
POWER ON
ÌÅÐÅÆÀ
PROTECTION
ÇÀÕÈÑÒ
AC OUTPUT
ÂÈÕ²ÄÍÀ ÍÀÏÐÓÃÀ
AC INPUT
ÂÕ²ÄÍÀ ÍÀÏÐÓÃÀ
DELAY
ÇÀÒÐÈÌÊÀ
180 s
6 s
5. DESCRIPTION
"Digital display of the output voltage level
« L » - low voltage protection;
« H » - high voltage protection;
« C » - transformer temperature protection
#POWER : LED (green) lights up when there is a input voltage
$Digital display of the input voltage level
%DELAY : LED (yellow) EOLQNVDWZRUNLQJRԚGHOD\
&PROTECTION: LED (red) lights up in case of accident (high/
low voltage protection operation, transformer thermal overload)
'Wall mounting holes
(Output socket (the STAB SLIM-2000 has 2 output sockets)
)Delay selection button (180 or 6 s): while pressing the delay time will be
180 s, when not pressed – 6 seconds
*RESET/OFF: power switch with built-in fuse
+Built-in power cord
6. MOUNTING
,PSRUWDQW %HIRUH PRXQWLQW WKH UHJXODWRU PDNH VXUH WKDW DOO Н[LQJ
elements durable fastened to the wall!
ϜFor securely wall mounting it is necessary to determine the type of wall
material (wood, brick, concrete, drywall, and etc.) for corresponding
fastener selection.
ϜMounting stabilizer location should be close to the wall outlet, considering the stabilizer power
cord length.
ϜNext, make a mounting fasteners (not included) to the wall, considering the wall mounting holes
location 'on the stabilizer rear panel (see Fig. 2).
Ϝ7KHQKDQJWKHVWDELOL]HURQԛ[LQJHOHPHQWV
Fig. 2. Rear panel
Fig. 3. Side panel
Fig. 1. Control panel
#
(
)
*
%
&
"'
$
(
'
)
*
+
OUTPUT
ȼɂɏȱȾɇȺɇȺɉɊɍȽȺ
a9ȼ
a9ȼ+]Ƚɰ
DELAY
ƻƴdžDŽƼǀƾƴ

Technical support: www.real-el.com
4
ENG
Automatic Voltage Regulator
STAB SLIM
7. INSTALLATION
Attention! Before connecting the regulator, make sure that all consumer devices con-
nected to it are off.
Ϝ Before installing the AVR, please make sure that total power of all voltage consumers is lower
than AVR power. Taking into account the starting load and power factor of voltage consumers, it is
necessary to apply power margin factor of 1.2–1.5; for such equipment as air conditioners, fridges
and other electric motors it should be 1.5–2.
Attention! When choosing an AVR, it is necessary to know that reduction of input voltage
LQFUHDVHVYDOXHRILQSXWFXUUHQWZKLFKPHDQVWKDWPD[LPXPSRZHURI$95LVUHGXFHGWRR
Such dependence is shown in the graph below:
Note. Adhere strictly to such dependence. If the condition stated above is not adhered to,
warranty servicing becomes void!
ϜPlug the stabilizer power cord +in the wall outlet.
ϜTurn on stabilizer with switch *(RESET position).
ϜIf the AVR operates properly, green LED #illuminates, and yellow LED %will blink. At the same
time the digital indicator "will show the input voltage. The total delay makes 6 or 180 s depending
on the "DELAY" button "RESET/ OFF" )position. After the delay time yellow LED %WXUQVRԚDQG
digital indicator $will show the output voltage of the regulator. And only after that you can turn on
the connected devices, consumers.
ϜWhen the mains voltage exceeds the allowable rate (lower threshold is 150 V, upper threshold is
270 V) the red LED &illuminates, the AVR disconnects the load automatically.
Attention! It is recommended to switch off the AVR and every connected consumer device
when the power supply is dropped.
8. PAUSE FUNCTION
ϜThe Pause mode feature is designed to protect equipment in case of frequent drops of the mains
supply. This is particularly important for consumer appliances with electric motors or compressors.
After power supply has been recovered, the AVR switches on within 6 or 180 seconds, depending
on the " DELAY " button " RESET/ OFF " position.
9. PROTECTION FUNCTION AGAINST HIGH AND LOW INPUT VOLTAGE, OVERLOAD AND
OVERHEAT
ϜThe stabilizer is equipped with an circuit overvoltage and undervoltage protection. In the case of
PDLQVYROWDJHGHYLDWLRQRYHU9RUEHORZ9LWWXUQVRԚWKHORDGDXWRPDWLFDOO\$WWKHVDPH
time red LED &illuminates. When the input voltage range returning to 150-270 V the stabilizer
automatically resumes operation.
ϜIn case of overload or short-circuit AVR power switch *will triggered. After elimination overload
cause or short circuits, press AVR power switch *(RESET position), and stabilizer will resume
operation.
output power, %
of nominal
140 150 160 170 180 190 200 210 220 230 240 250 260 2700
50
25
75
100
100 110 120 130
input
voltage, V

Technical support: www.real-el.com
5
ENG
Operation Manual
STAB SLIM
10.
TROUBLESHOOTING
7KHVZLWFKLVRԚ
2. There is no voltage in the
power supply network.
3. The fuse has activated.
4.The load connected is too
powerful.
The AVR is out of order.
Input voltage is very
unstable.
Input voltage is beyond
possible regulation range of
150 – 270 V.
The AVR does not start.
The AVR is turned on, but
there is no output voltage.
The AVR often produces
clicking sounds.
The AVR has disconnected
the load. Active red indicator.
1. Press the switch once again.
2. Make sure that power supply
is available.
3. Disconnect the AVR from the
power supply and reset the
circuit breaker
4. Disconnect some load.
If the problem is not eliminated,
please address an authorized
service center.
It is normal. The AVR regulates
output voltage.
When input voltage is
normalized, the AVR tuns on
automatically.
CauseProblem Solution
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product by yourself.
11. SPECIFICATIONS
Notes:
Ϝ7HFKQLFDOVSHFLԛFDWLRQVJLYHQLQWKLVWDEOHDUHVXSSOHPHQWDOLQIRUPDWLRQDQGFDQQRWJLYHRFFDVLRQWRFODLPV
Ϝ7HFKQLFDOVSHFLԛFDWLRQVDQGSDFNDJHFRQWHQWVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFHGXHWRWKHLPSURYHPHQWRI
TM REAL-EL production.
Model
Maximum load
Safety fuse
Input voltage
Output voltage
Switching time
Short circuit protection
Environment temperature
Humidity
Dimensions
Weight
STAB SLIM-300
9ƴ:
ƴ
~150–270 V/50 Hz
~230 ± 8 % V/50 Hz
яPV
available
0 – 40 °C
up to 90 %
330 × 160 × 60 mm
2.2 kg
STAB SLIM-500
9ƴ:
ƴ
~150–270 V/50 Hz
~230 ± 8 % V/50 Hz
яPV
available
0 – 40 °C
up to 90 %
330 × 160 × 60 mm
2.6 kg
STAB SLIM-1000
9ƴ:
ƴ
~150–270 V/50 Hz
~230 ± 8 % V/50 Hz
яPV
available
0 – 40 °C
up to 90 %
330 × 160 × 60 mm
3.2 kg
STAB SLIM-2000
9ƴ:
ƴ
~150–270 V/50 Hz
~230 ± 8 % V/50 Hz
яPV
available
0 – 40 °C
up to 90 %
370 × 200 × 60 mm
5 kg

Models: STAB SLIM-300, STAB SLIM-500, STAB SLIM-1000,
STAB SLIM-2000
Manufacturer: ENEL GROUP OU, Katusepapi tn 6, Lasnamäe linnaosa, Tallinn,
+DUMXPDDNRQG, Estonia. Made in China.
® Registered Trademark of ENEL GROUP OU. Estonia.
This manual suits for next models
3
Table of contents
Other Real-El Controllers manuals