Record Power cl3b User manual

Instruction
Manual
Bowl Turning
Attachment
CL3B
IMPORTANT
For your safety read
instructions carefully before
assembling this product.
Save this manual for
future reference.
Woodworking Machines & Accessories
Telephone: [phone]
Facsimile: 0870 770 1888
Record Power Ltd
Unit B, Adelphi Way
Staveley S43 3LS
Email: [e-mail]
http://www.recordpower.co.uk

1. Assembly
Instructions
2. Usage &
Application
fig.1
fig.4
fig.2
fig.3
Positioning & Adjustment
The most comfortable position for turning a particular
workpiece can be obtained not only by adjusting the various
components of the end turning unit but also by swivelling the
headstock to the optimum angle and by adjusting its position
along the bed bars. See fig.3 for a typical arrangement of the
bowl rest.
Fitting The Bracket To The Lathe
To assemble the unit, simply remove the end bracket at the
headstock end of the machine and fix the turning bracket in
its place. Then assemble the swivel bracket as shown in fig.1
& fig.2. This unit can be left on the machine when turning
between centres etc.
Normal Duty work
For normal duty work the swivel bracket clamping screw is
sufficient to secure the swivel bracket in position but if movement
is anticipated then the swivel bracket secondary screw should
also be tightened. fig.4.
Thin work
For thin work the headstock can be swivelled to give maximum
clearance for the turning tool handle fig.5.
fig.6
fig.5
Heavy Duty Work
For exceptionally heavy duty work the end bracket from the
standard machine can be inocorporated fig.6. The following extra
parts will be required for this application:
M12 nut (ZABX)
Bolt (ZABM)
Washer (ZABO)
Cast washer (ZED)
Angle strap (ZIF)

3. Parts Diagrams

5. Genuine Record Power Accessories
Approved Accessories & Spares Available In The Record Power Range of Woodturning Products.
4. CL3B Parts List
ZJZ End Turning Bracket 1
BOST Swivel Bracket 1
BOEB Clamping Screw For Banjo 1
BOES Clamping Screw For Swivel Bracket 1
CLK1 Plastic Knob 2
ZIS Handle - Long 2
ZOP Stem For Tubular Bowl Rest 1
ZOO Tube For Tubular Bowl Rest 1
ZABM Nut - M12 3
ZABO Washer - M12 3
ZAES Washer - Large 1
ZABP Washer - M10 1
ZACO Screw - M12 x 65mm 1
ZACQ Screw - M10 x 30mm 1
PART DESCRIPTION
No. QTY
GENERAL FITMENTS
Lathe Bench
Bowl Turning Rest
17” Tool Rest
10” Tool Rest
5” Tool Rest
CONSUMABLES
Friction Polish - White ‘Speedaneez’
Friction Polish - Standard ‘Speedaneez’
Carnuba Wax
Spindle Oil – (100ml)
Spindle Oil – (250ml)
CHUCKS & FACEPLATES
Geared Scroll Chuck
Lever Scroll Chuck
Woodscrew Chuck Heavy Duty 2-1/2”
Woodscrew Chuck Medium Duty 2-1/2”
Faceplate, Cast Iron 4”
Faceplate, Cast Iron 6”
CENTERS AND SPINDLE ADAPTORS
4-Spur Center – 7/8” Dia., No.1 Morse Taper
2-Spur Center – 5/8” Dia., No.2 Morse Taper
Ring Center
90 Degree Back Center
Cup Center
Revolving (Live) Center
Revolving (Live) Center, Heavy Duty
Shell Augers w/o Handle, 30” x 5/16”
Long Hole Boring Kit
Drill Chuck, 1/2” Capacity
Drill Chuck, 3/4” Capacity, Geared
No.1 Morse Taper for CWA 140
No.1 Morse Taper for CWA 150
Threaded Protector Center Ejector
HSS TURNING TOOL SETS
Set of 6 HSS Turning Tools: 3/4” Roughing
Gouge, 1” Skew Chisel. 1/8” Parting Tool,
1/4”, 3/8” & 1/2” Spindle Gouges.
Set of 8 HSS Turning Tools: 3/4” Roughing
Gouge, 1” Skew Chisel. 1/8” Parting Tool,
1/4”, 3/8”, 1/2” Spindle Gouges, 1/4” Deep
Bowl Gouge & 3/4” Domed Scraper.
RPLB 24-48
CL3B
CLO/H
CLO/J
CL0/K
CWA190
CWA191
CWA200
RPSO-100
RPSO-250
RP4000
RP3500
CWA 61
CWA 62
CWA 70
CWA 71
CWA 80
CWA 81
CWA 90
CWA 91
CWA 92
CWA 93
CWA 100
CWA 111
CWA 131
CWA 140
CWA 150
CWA 160
CWA 161
CWA 170
RPCHS6
RPCHS8
INDIVIDUAL HSS TURNING TOOLS
Roughing Gouge: 3/4”
Roughing Gouge: 11/4”
Spindle Gouge: 1/4”
Spindle Gouge: 3/8”
Spindle Gouge: 1/2”
Skew Chisel: 1/2”
Skew Chisel: 3/4”
Skew Chisel: 1”
Skew Chisel: 11/4”
Square End Chisel: 3/4”
Square End Chisel: 1”
Parting and Beading Tool: 1/8”
Parting and Beading Tool: 3/8”
Deep Bowl Gouge: 1/2”
Deep Bowl Gouge: 1/4”
Domed Scraper: 1/2”
Domed Scraper: 3/4”
Domed Scraper: 1”
Straight Scraper
Full Round Scraper
Domed Scraper
Half Round Left Hand Scraper
Half Round Right Hand Scraper
Skew Left Hand Scraper
Skew Right Hand Scraper
Oval Skew Chisel: 3/4”
Oval Skew Chisel: 1”
Oval Skew Chisel: 11/4”
BEARINGS, SPINDLES & BELTS
Back Bearing for CL2, CL3 & CL4
Bronze Bearing for CL2, CL3 & CL4
Back Bearing for CL1 & CL5
Front Bearing for CL1 & CL5
Drive Belt for CL4
Drive Belt for CL2 & CL3
Drive Belt for CL1 & CL5
Main Spindle for CL2, CL3 & CL4
Main Spindle for CL1 & CL5
CH 100
CH 120
CH 200
CH 210
CH 220
CH 300
CH 310
CH 320
CH 330
CH 410
CH 420
CH 500
CH 520
CH 600
CH 601
CH 700
CH 701
CH 702
CH 800
CH 810
CH 820
CH 830
CH 831
CH 840
CH 841
CH 900
CH 910
CH 920
ZACG
ZJR
ZABD
ZABE
CL4/I
CL3/I
CL0/I
ZJT
ZBQ
DESCRIPTIONPART NO. DESCRIPTIONPART NO.