Record Power Ltd, Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA
Tel: +44 (0) 1246 571 020 Fax: +44 (0) 1246 571 030 www.recordpower.co.uk
To register a product and find your local stockist visit
recordpower.info
Made in China
Fig 2
Micro USB-A port
Fig 3
Spotlight
Fig 4
Floodlight
To Use with 1 Lithium 18650 Battery
Insert the Lithium battery into the Lithium battery
holder then insert into the lamp body with the
positive (+) end facing forwards. Screw on the
end cap and press the button to switch the lamp
on / off. The use of a good quality battery
with overload protection is recommended.
To Use with the Micro USB-A Cable
Ensure the empty AA battery holder is fitted
inside the lamp. Attach the Micro USB-A cable to
the lamp and 5 V, 1 A USB plug socket adaptor
(not included) to operate. See Fig 2.
Focus Adjustment
The lamp beam is adjustable from a spotlight
to a floodlight by sliding the lamp’s front collar.
Slide the collar outwards to achieve a spotlight
as shown in Fig 3 and to the rear for a floodlight
beam as shown in Fig 4.
Charging
The use of a compatible external battery
charger to charge the lithium 18650
battery is recommended.
WARNING
The use of the lamp through mains power
together with an inserted 18650 Lithium battery
is not recommended, as this could damage the
lamp and / or the battery.
Magnetic Side Clip
A side clip with magnetic back is supplied for
alternative mounting methods of the lamp on
steel products. The clip can function as a storage
holder or can be removed from the lamp.
