Recordex SimplicityTouch ST-700 User manual

Instructions for SimplicityTouch ST-700 Gen 3
Disable Wireless Network Interface
Topics Covered:
Disable wireless interface
Model Numbers Covered: 70” ST-700, Generation 3
Last Update:12/29/2016
e: [email protected]
TOOLS REQUIRED:
None.
ESTIMATED TIME REQUIRED:
Less than 5 min.

Disable wireless interface
If using the wired connection you may wish to completely disable the wireless interface of the panel. Follow these instructions to
disable the wireless interface.

STEP REFERENCE IMAGE INSTRUCTIONS
1 Power on panel and then press the home but-
ton.
2 Select Settings.
The default password is 0 0 0 0.
It is recommended that you change the default
password.

STEP REFERENCE IMAGE INSTRUCTIONS
3 Select Network.
4 Select Router Settings.

STEP REFERENCE IMAGE INSTRUCTIONS
5 Login to router.
Default usernmae is: admin
With password left blank.
6 Select Advanced Mode from left menu.

STEP REFERENCE IMAGE INSTRUCTIONS
7 Select 5G CONFIG from top menu.
Then check the Disable Wireless Lan Interface
checkbox.
Then click Apply and choose to Reboot Later.

STEP REFERENCE IMAGE INSTRUCTIONS
8 Select 2.4G CONFIG from top menu.
Then check the Disable Wireless Lan Interface
checkbox.
Then click Apply and choose to Reboot Now.

STEP REFERENCE IMAGE INSTRUCTIONS
9 When router reboots it will show the status
page and the 2.4 and 5GHz wireless configura-
tion information will be removed from status
screen indicating that the wireless interface is
disabled.
END