red lion Sixnet BT/SN-660 Series Installation instructions

1
www.sixnet.com
IndustrialPro Router Hardware Guide
Version 1.04
April 2013

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
2
TABLE OF CONTENTS
1Product Overview ...............................................................................................................................................3
1.1 Specifications......................................................................................................................................................... 3
1.1.1 General specifications.......................................................................................................................................3
1.1.2 Mechanical specifications BT/SN-6000.............................................................................................................4
1.1.3 Power specifications and consumption.............................................................................................................5
1.1.4 Indicators Lights (LED)......................................................................................................................................9
1.1.5 Data Interface Specifications: Serial, Ethernet & USB......................................................................................9
1.1.6 RESET button functions..................................................................................................................................10
2Hardware Installation........................................................................................................................................11
2.1 Mounting the BT/SN-6000 series modem........................................................................................................... 11
2.2 Cellular antenna................................................................................................................................................... 11
Installation and verification ............................................................................................................................................12
Antenna diversity ...........................................................................................................................................................12
2.3 Ethernet cable ..................................................................................................................................................... 12
2.4 USB cable ............................................................................................................................................................. 12
2.5 Serial cable........................................................................................................................................................... 13
2.6 Power source ....................................................................................................................................................... 13
Powering up the modem................................................................................................................................................13
Testing the power connection........................................................................................................................................13

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
3
1 Product Overview
1.1 Specifications
1.1.1 General specifications
Table 1 –General specifications
Wireless interfaces
CDMA EvDO.A models
Dual-band CDMA2000 EVDO Rev. A (with diversity)
Backward compatible with 1xRTT and IS95
GSM EDGE Models
Quad-band 850/900/1800/1900 GSM
Backward compatible with Quad-band GPRS/UMTS
GSM HSPA Models
Quad-band 800/850/1900/2100 MHz WCDMA (with diversity)
HSDPA/HSUPA/HSPA
Backward compatible with GPRS/EDGE/UMTS
Peak data rates
Download: CDMA –3.1Mbps / EDGE –384 kbps / HSPA - 7 Mbps
Upload: CDMA - 1.8 Mbps / EDGE –120 kbps / HSPA - 5.76 Mbps
Serial interface
1x RS-232 Serial DB9 115200bps
USB interface
BT/SN-6000 series: 1x USB 2.0 mini B
LED indicators
Power, WAN, Signal, RS232, GPS, Ethernet Link & Activity
Dimensions
BT/SN-6x0x: 120 x 96 x 32 mm (4.7 x 3.77 x 1.25"), 453g (1.0 lb)
BT/SN-6x21: 120 x 96 x 51 mm (4.7 x 3.77 x 2.00"), 500g (1.1 lb)
Power Input
8 - 30 VDC (12 VDC nominal), Power over Ethernet on BT/SN-6x01EB
Power consumption
See Table 6
Environmental
BT/SN-6000 series
Operating Temp: -40 to +85°C (-40 to 185°F)
Shock & Vibration: IEC 60068-2-1/2/6/27/30, DNV 2.4 3.7/8/9, MIL-STD 810F/202G
Humidity: 5 to 95% non-condensing
MTBF BT6601EB 1530K Hours GB @ 40˚C per MIL-HNDBK-217F2
MTBF BT6601 1,832K Hours GB @ 40˚C per MIL-HNDBK-217F2
Certification
Hazardous Locations - Class I, Div. 2, Groups A,B,C,D, ANSI / ISA12.12.01
Electrical Safety - UL508/CSA22.2/14 (CUL)
EMC- FCC, part 15 and Industry Canada, ICES-003
PTCRB (GSM), CE, R&TTE, RoHS

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
4
1.1.2 Mechanical specifications BT/SN-6000

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
5
1.1.3 Power specifications and consumption
Power is supplied to the modem via:
4-pin Molex connector for the BT/SN-6x00 model
4-pin screw terminal for the BT/SN-6x01, BT/SN-6x01EB and BT/SN-6x21 models
DC 2.5mm barrel plug for all BT/SN-6000 models
Power over Ethernet for all BT/SN-6x01EB models
1.1.3.1 4-pin Molex Connector (BT/SN-6x00)
Power is supplied to the modem via the 4-pin Molex connector on the front panel for the BT/SN-6x00 models.
The pins are described as follows:
Table 3 - 4-pin Molex connector (BT/SN-6x00)
OUT IN
GND POS
Power connector
(facing modem)
Pin
Name
Description
1
GND
Ground
2
POS
Power supply input (8 to 30 VDC)
3
IN
Digital and analog input
4
OUT
Digital Output
1.1.3.2 4-pin Screw Terminal (BT/SN-6xx1)
Power is supplied to the modem via the 4-pin Screw Terminal on the front panel for the BT/SN-6xx1 models.
The pins are described as follows:Table 4 - 4-pin screw terminal (BT/SN-6xx1)
Power connector
(facing front)
Pin
Name
Description
1
GND
Ground
2
PWR+
Power supply input (8 to 30 VDC)
3
OUT
Digital output
4
IN
Digital and analog input
1.1.3.3 DC 2.5mm Barrel Adapter
Power is supplied to the modem via the barrel adapter on the left side of all BT/SN-6000 series modems. The
contacts are described as follows:
Table 5 –DC 2.5mm Barrel adapter (BT/SN-6000)
Power connector
(facing left side)
Pin
Name
Description
Sleeve
GND
Ground
Tip
PWR+
Power supply input (8 to 30 VDC)

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
6
WARNING: DC 2.5mm Barrel Adapter shall not be used in hazardous locations.
1.1.3.4 Power specification
Power input to the modem is protected against reverse polarity and over-voltage.
The modem’s power consumption is as follows:
Table 6 –Power consumption
Model
Draw in mA (at 12 VDC)
Standby
Transmitting
Peaks
BT/SN-6401
115
246
417
BT/SN-6421
229
360
531
BT/SN-660x
115
213
444
BT/SN-6621
249
347
578
BT/SN-6800
115
320
802
BT/SN-680x
115
320
802
BT/SN-6821
249
454
936
Wiring instructions are provided in the Hardware Installation section.
All modems are equipped with protection for reversed polarity and power surges over 33 volts. The modems
are equipped with an internal 3 Amp fuse.

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
7
1.1.3.5 Electrical Specifications and Pinout
1x Digital Output (DOUT)
Configuration : Open Collector, reference to ground
Absolute Maximum IDC: 500mADC (Vce = 750mVDC)
Absolute Maximum VDC: 30VDC (open circuit)
Absolute Minimum VDC: -0.4VDC (open circuit)
1x Digital Input (DIN)
Configuration : unisolated level detection, reference to ground
Active level : 1.6VDC to 30VDC
Inactive level : 0VDC to 1.3VDC
Absolute Minimum VDC: -0.3VDC
Absolute Maximum VDC: 33VDC
Leakage IDC at 5VDC : 150uADC
1x Analog Input (Shared with Digital Input) (DIN/AI1)
Configuration : unisolated input, reference to ground
Resolution : 1024 (ADC 10-bit)
VDC per step : 4.8875855mVDC
Full scale level : 5VDC
Zero level : 0VDC
Absolute Minimum VDC: -0.3VDC
Absolute Maximum VDC: 8.3VDC
Leakage IDC at 5VDC : 265.96uADC TYPE

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
8
Modem views
4-pin power connector
BT/SN-6x00
BT/SN-6600
BT/SN-6800
Screw-block power
connector
BT/SN -6x01
BT/SN -6401*
BT/SN -6601
BT/SN -6801
Screw-block power
connector
&
PoE power input
BT/SN-6x01EB
BT/SN -6401EB*
BT/SN -6601EB
BT/SN -6801EB
Ethernet Switch
BT/SN-6x21
BT/SN -6421*
BT/SN -6621
BT/SN -6821
The BT/SN-64xx series modems are not equipped with a diversity antenna connector

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
9
1.1.4 Indicators Lights (LED)
Table 7 –LEDs
LED
Status
Corresponding State
Power
OFF
Modem is powered off
ON
Modem is powered on
FLASH
Firmware error
Signal
OFF
No signal available or signal strength is below -100 dBm
ON
Excellent signal strength = greater than -69 dBm
FLASH
Fast: Every 300ms = -79 to -70 dBm
Medium: Every 600ms = -89 to -80 dBm
Slow: Every 1200ms = -99 to -90 dBm
WAN
OFF
Cellular connection is not established
ON
Cellular connection is established - no network data activity
FLASH
Cellular connection is established - with network data activity
RS232
OFF
Serial connection is not established
ON
Serial connection is established - no data activity with host
*FLASH
Serial connection is established - with data activity with host
*Depending on Serial Application
1.1.5 Data Interface Specifications: Serial, Ethernet & USB
1.1.5.1 Ethernet Port
The modem's 10/100Mbps Ethernet port is compliant with the EIA-568 standard. The modem’s ports are
autosensing so they can be used with either a straight or crossover RJ45 cable to connect to host ports.
The BT/SN-6x21 features a 5-port Ethernet switch allowing connectivity to multiple local devices.
1.1.5.2 USB Device Port
This is a USB 2.0 Device interface on a Mini B (BT/SN-6xxx) connector. It offers Ethernet-over-USB
functionality using the RNDIS driver for Windows XP and Windows Vista Operating systems only. The
BlueTree RNDIS driver must be installed before the USB interface can be used. The driver and instructions
can be obtained at www.sixnet.com.

IndustrialPro Router Hardware Guide
Sixnet, LLC Corporate Headquarters FLEXIBLE. RELIABLE. POWERFUL.
331 Ushers Road, Ballston Lake, NY 12019 T [phone] F [phone]
www.sixnet.com
Version 1.04 © 2012. Sixnet. All Rights Reserved.
10
1.1.5.3 Serial Port (DB9)
The modem’s serial port is an RS232 DCE, compliant with EIA-232 standard. The connector used is DB9
female and is shown in the illustration below.
Figure 1 –Serial connector (looking at back of modem)
For further serial wiring information, refer to the Hardware Installation section.
1.1.6 RESET button functions
Table 8 –Reset button functions
Mode
Pattern
Description
Hard reset
Press and hold for less than 3
seconds
Standard reboot
Factory restore
Press and hold between 3 and
10 seconds
RS232 LED flashes quickly
This option is implemented in SN
version 3.09 and higher. To restore
default settings for older versions,
rerun the SN Reflashing procedure
found at www.sixnet.com
FW upgrade
Press and hold between 10 and
15 seconds
WAN LED flashes quickly
Puts the modem in advanced firmware
upgrade mode by restarting the modem
and running the bootloader only. Do not
use this mode unless instructed to by
Sixnet Technical Support.
USB pass-through
Press and hold for longer than 15
seconds
Signal LED flashes quickly
Puts the modem in main pass-through
mode to the RF module, allowing CCT
provisioning and PST support. Do not use
this mode unless instructed to by Sixnet
Technical Support.