Redmond KP1106 User manual

USER MANUAL
WO006
Model NO: KP1106
WINE OPENER

Package Contents
a) 1 x Wine Opener d) 1 x Foil cutter
b) 1 x Wine Preserver e) 1 x Charging base
c) 2 x Wine Stoppers f) 1 x Power Adaptor
g) 1 x Wine Pourer
• If you find any of the above is missing, please
contact your retailer
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions thoroughly before using the
product.
1. This Wine Opener and Wine Preserver Set is intended for
household use only.
2. This Wine Opener and Wine Preserver Set is intended to
extract
the corks from standard wine bottles.
3. Do not operate the Wine Opener and Wine Preserver Set
with a damaged AC/DC Adapter or Charging Base. If the AC/DC
Adapter is damaged it must be replaced by the manufacturer or
a suitably qualified person.
4. Do not place the appliance near an open flame, cooking or
heating appliance, or hot surface.
5. This appliance is not intended for use in wet or damp
conditions.
6. Ensure that the power cord is positioned so that it will
not get damaged or cause a trip hazard.
Wine Opener
Wine Preserver
Charging Base
Wine Pourer Foil Cutter
Wine Stoppers

7. Use only the AC/DC Adapter and Charging Base supplied with
the appliance.
8. Do not immerse the appliance in water or any other liquid.
9. For indoor use only. Do not expose the Wine Opener and Wine
Preserver Set or Charging Base to rain or other extreme
conditions.
10. Never force the Wine Opener and Wine Preserver Set onto a
bottle or attempt to speed up the mechanism. The Cork Remov-
er will work best when it is operated at its intended speed.
11. Do not touch or adjust the Wine Opener and Wine Preserver
Set mechanism or the corkscrew spiral. Only hold the
Cork Remover by its plastic housing.
12. This appliance contains a re-chargeable battery. Do not
dispose
of the product on a fire as this may cause an explosion.
13. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
14. To avoid electric shock do not open the casing. There are no
user serviceable parts inside.
CAUTION: The corkscrew is sharp. Keep body parts (e.g.
fingers) and utensils away from the operating end of the Wine
Opener.
OPERATION
1. Charging the Wine Opener and Wine Preserver Set
It is recommended that the Wine Opener and Wine Preserver Set
is charged for at least 12 hours before using it for the first time.
Please follow the instructions for charging the unit below:
Connect the DC Power Plug into the DC Power Socket at the
back of the Charging Base.

Place the Wine Opener and Wine Preserver Unit into the
Charging Base. Ensure that the arrows on the Unit and Base
align with each other so that the electrical connections are
made correctly.
Insert the AC/DC Adapter into a mains socket and switch on
the supply.
The Charging Indicator will illuminate blue, indicating that the
battery is charging. The light will turn off when fully charge the
battery . It will take 10-12 hours to fully charge the battery.
Switch off the supply and remove the AC/DC Adapter from the
mains socket. Remove the DC Power Plug from the Charging
Base.
The Wine Opener can be used to open up to 30 bottles when
fully recharged.
2. Opening a Wine Bottle by Wine Opener
Before extracting the cork please remove any seal from the
bottle using the Foil Cutter provided (see Fig.2)
Place the Wine Opener on top of the wine bottle making sure
that it remains as upright as possible at all times. If you hold
the Wine. Opener at an angle to the bottle it will not remove the
cork properly. (see Fig.3)
2
3