Rehab RM X Fold Rollator User manual

RM X Fold Rollator
RM200S

Your new Aluminium Rollator is suitable for everyday use. It can be used for
both indoor and outdoor purposes. The lightweight folding design offers easy
transportation and the sturdy aluminium frame gives stability and support
when in use.
Please follow these simple steps to assemble your rollator -
1. Place your rollator on a level surface
2. Unfold the two front wheels until they lock into position, then insert
the star knob as indicated and turn clockwise until fully secured.
3. Remove the locking pin, unfold the two rear wheels until the holes on
the frame and the leg line up, replace the pin and lock in with the
attached bracket ensuring it is secure.
4. Now your rollator is ready to use. Always make sure you check the
rollator has been assembled correctly before use.
Assembly / Adjustment

It is important to never exceed this limit and always ensure that the
product weight capacity is sufficient before using the product. Failure
to do so could result in injury or damage the product.
Maximum User Weight
All of the product components are manufactured from high quality
materials. However, it is very important that you carry out regular
checks: all nuts, bolts, knobs and handles should remain secure.
Wheels should move freely and brakes engage when applied. To
ensure the best from your rollator it should be kept well maintained.
In the event of identifying any irregularities you should contact your
local distributor for advice.
NB: Your Rollator should only be used for its intended purpose and
for highest safety you should not push anyone seated.
Care & Maintenance
Product Code Description Weight Limit
RM200S RM X Fold Rollator 130kg

Your Local Dealer:
Imported by
Rehab and Mobility Wholesalers Pty Ltd
P: 1300 368 085
E: [e-mail]
www.rehabandmobility.com.au
Warranty
All products carry a 12 month warranty from the date of
purchase against manufacturing defects.
Misuse or Damage is not covered.
This warranty does not affect your statutory rights.