Rejuvenation Linfield User manual

Linfield Pivot Mirror
2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 401-1900 rejuvenation.com
CALIFORNIA PROPOSITION 65 WARNING: This product contains brass hardware components
which contain lead, a heavy metal known by the State of California to cause cancer, birth defects, or
other reproductive harm.
PARTS INCLUDED
Mirror 1pc Screws 4pcs
Support Brackets 2pcs Set screw 2pcs
Drywall anchors 4pcs Allen wrench 1pc
MOUNTING INSTRUCTIONS
Note: Consult your local hardware store for proper mounting to other wall materials.
Tools required: Phillips and Slotted screwdriver, and tape measure.
Drywall Mounting: If there is no stud, the wall anchors/mounting screws are both required.
1. Using the Allen wrench, loosen set screws from top of both support brackets.
2. Place one of the support brackets in desired location.
3. Mark the location of drywall anchor installation. Remove the support bracket from the wall.
Using a Phillips head screwdriver, pierce the tip of the anchor into the wall and turn
clockwise until anchor is flush with the wall. Do not “push” or drive the anchors into the wall,
they are designed to bore into the wall like a Screw.
4. Once both anchors are in place, put the support bracket over the anchor and insert mounting
screws. Turn mounting screws clockwise just until you feel resistance.
5. Slide the mirror into the mounted support bracket. Place the un-mounted bracket on the
remaining side to determine the location for the second mounting plate. Using a tape
measure and level for accuracy. And repeat step 3.
6. Slide the mirror into the mounted support bracket then press the second support bracket
onto the pivot mirror post.
7. Carefully lift the mirror and bracket and place over the wall anchors, fitting the pivot mirror
post into the first support bracket. Using a Slotted screwdriver insert the mounting screws,
turning screws clockwise until you feel resistance.
. To adjust the angle of the mirror, use the Allen wrench to loosen set screws. Once at the
desired angle, retighten set screws.
CARE INSTRUCTIONS
Wipe with a soft, dry cloth. To protect the finish, do not use household cleaners or abrasives.

Linfield Pivot Mirror
2550 N.W. Nicolai Street, Portland Oregon 97210 Customer Service: 401-1900 rejuvenation.com