Rejuvenation Shaw User manual

ASSEMBLY INSTRUCTIONS
Shaw Dining Table - Round Extension
Page 1 of 3
_____________________________________________________________________
Hardware List:
Piees List:
3-1/2" Bolt (x8)
Washers (x8)
Table Top
(x1)
24" Leaf (x1)
Leg (x4)
Nut (x8)

ASSEMBLY INSTRUCTIONS
Shaw Dining Table - Round Extension
Page 2 of 3
_____________________________________________________________________
Step 1: Remove table base from pakaging
and plae upside down on a non-
abrasive surfae.
Step 2: Remove legs from pakaging
and plae one in a orner, plaing
bolts through orner blok holes.
Step 3: Loosely tighten table leg by plaing
a washer and nut on the end.

ASSEMBLY INSTRUCTIONS
Shaw Dining Table - Round Extension
Page 3 of 3
_____________________________________________________________________
Step 4: Turn table right side up. Tighten lag
bolts seurely into plae.
Step 5: Unlok table top and slide open to
plae the leaf on the storage braes.
Step 6: Close, lok the top in plae and enjoy
your new dining table.