Remington AMAZE AIRSTYLER AS1201 User manual

A
C
C
H
I
J
F
E
D
G
B
D
K
E
F
G
L
B
090192_REM_IFU_AS1201_22L.indd 2 07.04.09 12:37
AMAZEAIRSTYLER
1200 W TTS CERAMIC IONICA

ENGLISH
1
GBDNLFEIDKSFINPSKCZPL
HUN
RUTRROGRSLAE
HR/
SRB
GB
Thank you for buying your new Remington®product.
Before use, please read these instructions carefully and keep them in a safe place
for future reference.
PRODUCT FEATURES
A1200Watt Ionic Airstyler
B25mm thermal smoothing brush
C30mm retractable bristle curling brush
D25mm soft curl spiral tong
EDouble sided thermal smoothing brush with nylon and mixture bristles
FConcentrator
GCool tips
H3 heat/speed settings, including cool air
IOn-Off Ion switch with LED indicator light
JAttachment release switch
KCompact portable storage case
L3 m salon length cable, swivel cord
3 year guarantee
INSTRUCTIONS FOR USE
Attachments can be connected to the power handle by simply aligning the
attachments to the handle and snapping into place. To remove, press the
attachment release button and pull attachment away from main housing.
During styling, always switch unit off before inter-changing attachments.
Ensure hair is tangle free from roots to ends.
Attach the concentrator to the power handle, plug in and switch on – warm air
will begin to flow.
Switch to high heat/speed setting and dry roots and lengths thoroughly to 75% dry.
Clip up hair ready for styling and switch to medium heat / speed setting.
The 25mm thermal bristle brush adds root volume.
1
ENGLISH
090927_REM_IFU_AS1201_22L.indd GB_1
090927_REM_IFU_AS1201_22L.indd GB_1
04.11.09 15:43
04.11.09 15:43
ZLWKFHUDPLFJULOOHIRUHYHQKHDW

ENGLISH
2
For extra fullness, take smaller sections, roll ends under to the roots and heat for longer.
To flip ends under, give the brush half a turn each time. Repeat with top sections.
Use small sections of hair to create soft spirals using the Spiral curling tong.
For firmer curls and waves, use the 30mm Retractable bristle curling brush.
For detangling and drying straight styles, use the double-sided thermal bristle brush.
CLEANING AND MAINTENANCE
To maintain peak product performance and to prolong motor life, it is important to regularly
remove dust and dirt from the air filter grille and clean with a soft brush. When unplugged
and cool, clean the outside of the power handle with a slightly damp cloth. To clean
attachments, remove from power handle and clean surfaces and bristles with a damp cloth,
dry naturally. No other maintenance is required.
SAFETY CAUTIONS
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION OF
A RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL
OPERATING CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN
ELECTRICIAN FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM.
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
This product is not suitable for use in bath or shower.
THE AIRSTYLER SHOULD BE UNPLUGGED FROM MAINS SUPPLY WHEN
NOT IN USE.
Do not leave the styler unattended when switched on.
Allow the styler to cool down before storage.
Do not immerse in water or other liquids.
Do not place styler on soft material e.g. carpet, bedding, towels, rugs etc.
Always ensure the voltage to be used corresponds to the voltage stated on the unit.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
can give cause to hazards. Persons responsible for their safety should give explicit
instructions or supervise the use of the appliance.
Do not use any attachments with this styler, other than those supplied by Remington®.
090927_REM_IFU_AS1201_22L.indd GB_2
090927_REM_IFU_AS1201_22L.indd GB_2
04.11.09 15:43
04.11.09 15:43

ENGLISH
3
GBDNLFEIDKSFINPSKCZPL
HUN
RUTRROGRSLAE
HR/
SRB
GB
Avoid allowing any part of the styler to contact the face, neck or scalp.
Do not wrap the cord around the unit. Check cord regularly for any sign of damage.
The 5 year guarantee is valid for consumer use. If used in salons the guarantee is
reduced to 1 year
Damaged cords can be dangerous. If the supply cord of this unit becomes damaged,
discontinue use immediately and return the appliance to your nearest authorised
Remington®service dealer for repair or replacement, in order to avoid a hazard.
Special tools are required for any examination, adjustment or repair. Unqualified repair
work could lead to hazardous conditions for the user.
We do not accept responsibility for damage to the product, persons or other items(s),
caused by misuse, abuse or non-compliance with these instructions.
WIRING INSTRUCTIONS UK Plugs Only
This product is fi tted with a BS1363 plug fused at 13A. If the plug is unsuitable, it should be
disconnected and an appropriate plug fi tted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 13A. If in doubt consult
a qualifi ed electrician.
The wires in the mains lead are coloured in accordance with following code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
- The wire which is coloured BLUE must be connected to the terminal which is marked
‘N’ or coloured BLACK. The wire which is coloured BROWN must be connected to the
terminal which is marked ‘L’ or coloured RED. Never connect either of the wires to the big
EARTH terminal marked ‘E’ or coloured GREEN or GREEN AND YELLOW.
PROTECTTHE ENVIRONMENT
Do not dispose the product in household waste at the end of its useful life. Disposal can
take place at the Remington®Service Centre or appropiate collection sites.
E
L
N
NEW WIRING
COLOUR CODE
BLUE
TO NEUTRAL
BROWN
TO LIVE
090927_REM_IFU_AS1201_22L.indd GB_3
090927_REM_IFU_AS1201_22L.indd GB_3
04.11.09 15:43
04.11.09 15:43