Remington S-2044 User manual

S-2044
Use and Care Guide Save theSe InStructIonS
IMPortant SaFetY
InStructIonS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
reaD aLL InStructIonS BeFore uSInG.
KeeP aWaY FroM Water.
DanGer
As with most electrical appliances, electrical parts are electrically live even
when switch is off. To reduce the risk of death by electric shock:
■Always unplug this appliance from the electrical outlet immediately after using.
■Do not use while bathing or in the shower.
■Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■Do not place or drop into water or other liquid.
■Do not reach for an appliance that has fallen into water. Unplug it immediately.
■Unplug this appliance before cleaning it.
WarnInG
To reduce the risk of burns, fire, electric shock or injury to persons:
■An appliance should never be left unattended when it is plugged in.
■Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities or special needs.
■Use this appliance only for its intended use as described in this manual.
■Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been dropped
into water.
■Keep the cord away from the heated surfaces. Do not wrap the cord around
the appliance.
■Never use while sleeping.
■Never drop or insert any object into any of the appliance’s openings.
■Do not use outdoors or operate where aerosol (spray) products are being used,
or where oxygen is being administered.
■Do not use an extension cord.
■This appliance is hot when in use. Do not let eyes or bare skin touch heated
surfaces.
■Do not place the heated unit directly on any surface while it is hot or plugged in.
■The plug on this appliance has one blade wider than the other, it is a polarized
plug. As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit
contact a qualified electrician. Do not attempt to defeat this safety feature.
■Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
■This appliance is for household use only.
■Do not plug or unplug this appliance when your hands are wet.
KeeP aWaY FroM chILDren
Product Features
Product Features
1. Teflon®Fiber ceramic covered
plates
2. Digital control
3. LCD display
4. ON/OFF button
5. Salon-length swivel cord
6. Hinge lock
7. Temperature bars
8. Lock symbol
Thank you for purchasing the Remington®Teflon®flat iron. Please carefully read
the instructions contained in this booklet, and keep them in a safe place for future
reference.
The Ultimate Styling Surface!
Delivers high ceramic heat and protects against damage for 50% less hair
splitting damage than leading brands.
Harnesses the special heat properties of Teflon® fibers into a polymer weave that
gently cushions as it glides through the hair.
Patent-pending Teflon®weave structure is scientifically designed to:
■Transfer high ceramic heat from plates to hair for incredible smooth shine.
■Shield hair against excessive and uneven heat generated by conventional
straighteners with flat metal plates.
■Create more styling surface than traditional plates so that more hair moves
against the heated surface rather than rubbing against other hairs – the biggest
cause of hair breakage and split ends.
Create no-frizz, sleek straight hair using the world's first straightener with Teflon®
Fiber ceramic plate technology.
45
7
8
1
2
6
3
1” Professional Slim Flat Iron
S-2044

■Lock Mode:
− Activating: Press and hold “+” button for about 3 seconds. All the keys will be
locked and the LCD will display the lock symbol.
– Releasing: Press and hold “-” button for about 3 seconds. All the keys will be
unlocked and the lock symbol will disappear.
Automatic Safety Shutoff
After approximately one hour, the unit will automatically shut itself off. To
reactivate the unit, press the ON/OFF switch.
Hinge Lock
This professional flat iron has a closing lock to make the unit easier to store.
To lock the iron, simply squeeze the plates together and turn the switch to the
locked position. To unlock, turn the switch to the unlock position. NOTE: Do not
heat the unit in the locked position. Cleaning
■Make sure the unit is unplugged and cool. Use a damp cloth to clean the plates
and the outside of the power handle. No other maintenance of the unit is
required.
■If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Storage
Unplug the unit whenever it is not in use. Allow it to cool, then store it out of
reach of children in a safe, dry location.
Never wrap the cord around the appliance, since this will cause the cord to wear
prematurely and break, thus voiding warranty. Handle the cord carefully and
avoid jerking, twisting, or straining it, especially at plug connections.
Maintenance
Limited Four-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a four-year period from the original date of consumer
purchase. If the product should become defective within the warranty period, we
will replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Spectrum Brands, Inc., Attention: Consumer
Services, 601 Rayovac Drive, Madison,WI 53711. For more information call
800-736-4648 in the US or 800-268-0425 in Canada.
Warranty
120/240 VAC 60/50 Hz
Questions or comments: Call 800-736-4648 in the US, or visit
www.stylewithremington.com
Dist. by: Spectrum Brands, Inc., Madison, WI 53711
Dist. by: Spectrum Brands Canada, Inc. Mississauga, ON L5L 0A1
Remington is a Registered Trademark of Spectrum Brands, Inc. or one of its sub-
sidiaries.
Teflon® and logo are registered trademarks of DuPont de Nemours and
Company and used under license by Spectrum Brands, Inc.
© 2009 SBI 06/09 Job #CS38333
MADE IN CHINA
Usage Tips
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
FOUR YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow the
exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington®branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
■Reaches high, ceramic-heat temperatures for salon straight results.
■Non-stick Teflon® fibers glide through the hair and shines while resisting messy
styling product build-up.
NEW and EXCLUSIVE to Remington®
Instant high heat - ready in 30 seconds
Variable high heat - 300ºF - 430ºF
On/off switch and LCD indicator light
Automatic shutoff after 1 hour
Salon length, swivel cord
Worldwide dual voltage use
Te flon®
PTFE Woven Fiber
Ceramic
To urmaline
Te flon
®
Fiber exclusive to Remington
High ceramic event heat.
No hot spots. Enhances shine.
To urmaline ionic conditioning.
Naturally emits ions to eliminate frizz.
How To Use
Heat Settings
Take extra care when using a professional styler. To prevent hair damage, make
sure to use the correct temperature setting for your hair type.
+/- Button Features
■Set to desired temperature setting.
■During heat up time, the LCD blue temperature display will pulse from 0-3 bars
until the desired temperature is reached.
■When the tool reaches the desired temperature, the pulsing will stop and the
correlating bars (1-3) will be displayed.
■Turbo Mode: (hold time about 2 seconds)
– Activating: Press “+” Button and hold about 2 seconds to increase temperature
to maximum 430°F setting.
– Decreasing: Press “-” Button to decrease the temperature like the normal
function mode.
■During cool down, the LCD blue temperature display will pulse the temperature
bars in descending order (3-0) until the unit is cool. The display will turn off at
this time.
Temp. Hair Type
A. 300˚-340˚F Very fine, fragile, damaged hair
B. 360˚-390˚F Normal, easy to straighten hair
C. 410˚-430˚ Thick, difficult to straighten hair
Straightening Your Hair
1. Hair should be dry and free of tangles before using the styling iron.
2. Plug the styler into an electrical outlet. Press and hold the ON/OFF button for
three seconds until the unit turns on and the LCD lights up.
3. Adjust the temperature using the temperature buttons. The display will flash
while the unit heats up, then glow steadily when it has reached the selected
temperature. The unit will beep when ready.
4. Divide hair into manageable sections and clip the upper layers on top of your
head and out of the way. Work with underneath layers first.
5. Test the styler on a small section of hair, then adjust the temperature up or down
before styling the rest of your hair.
NOTE:
■If you find that you need a higher setting while straightening your hair, simply
adjust the temperature to a higher heat setting.
■While straightening your hair, if you find that you need a lower setting, adjust the
temperature to a lower heat setting. Because the unit is already hot, it may take
a few minutes to cool off.
6. Take a small section of hair and pull hair down and away from your scalp, and
hold it taut.
7. Starting at the roots, clamp hair firmly between the plates and run the styler
down the entire hair strand, from root to tip, in one smooth stroke. Do not hold it
in one area for a long period of time or damage to hair may occur.
8. To create curves or flicks, rotate your wrist to turn the iron in toward your head
or out away from your head as you run the iron down the hair strand.
9. Repeat with all the sections of your hair, working with the underneath layers first,
then the top and sides.
10.When you are finished styling, press and hold the ON/OFF button to turn the unit
off, unplug it, and allow it to cool before storing.
NOTE:
DUAL VOLTAGE APPLIANCE
■Confirm the voltage available at each overseas location before using the
appliance. For connection to a 240-volt supply, use an attachment plug adapter
of the proper configuration for the power supply receptacle.
T22-28127