Renesas R0E001000FLX00 User manual

R0E001000FLX00
Extension Flexible Cable for E100 Emulato
r
User’s Manual
CAUTION If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
Jun. 01, 2008
REJ10J1884-0100
(1/2)

1. Outline
The R0E001000FLX00 is a flexible cable that extends between
the MCU unit for E100 Emulator and the user system.
2. Package Components (See Figure 1)
Check to see if the R0E001000FLX00 package has all the
following contents before using this product.
(1) R0E001000FLX00 flexible cable................................ 1 pc.
(2) SP-RE10FLX metal fitting.......................................... 1 pc.
(3) R0E001000FLX00 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Insertion/removal
iterations of connector 50 times guaranteed
4. Usage (See Figure 2)
Flexible cable
R0E001000FLX10
Metal fitting
SP-RE10FLX
Figure 1 Package components of the R0E001000FLX00
100
HIGHPERFORMANCE
EMULATORSYSTEM
R0E530650MCU00
(1)
(2)
Attach the metal fitting to the flexible
cable cover with the notch side to
the end of the cable.
(1)
Connect the flexible cables.
(2)
Metal fitting attached to the cable
Figure 2 Usage of the R0E001000FLX00
5. Precautions
IMPORTANT
Note on Electrical Characteristics:
zBy using this cable for extension, the DC resistance will increase (approximately 5Ωper one line), so that the
electrical transmission characteristics, etc, become worse. When problems occur, such as a difference in timing
between the user system and the MCU unit, do not use this cable.
Notes on This Product:
zWe cannot accept any request for repair.
zFor inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
(2/2)