Renesas MCU Signal Measurement Board PCA7759 User manual

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.

Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

PCA7759
MCU Signal Measurement Board for Renesas Emulator
User's Manual
Keep safety first in your circuit designs!
•Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
•These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.
•Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
•All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).
•When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
CorporationandRenesasSolutionsCorporationassumenoresponsibilityforanydamage,liabilityorotherlossresultingfromtheinformationcontainedherein.
•Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.
•The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.
•If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.
•Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.
Precautions to be taken when using this product
•This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
•Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.
•This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.
Renesas Tools Homepage http://www.renesas.com/en/tools
Rev. 1.00
July 1, 2003
REJ10J0194-0100Z
CAUTION
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.

( 2 / 8 )
4. External Dimensions
Figure 2 External dimensions of the PCA7759
1. Outline
The PCA7759 is a board for MCU signal measurement
which is connected between an emulation probe or emula-
tor and a package converter (M3T-FLX-144NSE etc.).
2. Package Components (see Figure 1)
(1) PCA7759 measurement board
(2) PCA7759 User's Manual (This manual)
3. Specifications
Table 1 Specifications
Insertion/removal
iterations of connector 50 times guaranteed
Figure 1 Package components of the PCA7759
NOTE: Because GND positions are different according to MCU package, the GND holes at the four
corners of this board are not connected to the GND's of an MCU. When you make a measurement,
connect these holes to the GND's of a target board.
Unit: mm
External dimensions for measurement

( 3 / 8 )
5. Usage (see Figure 2)
The PCA7759 is connected between an emulation probe or emulator and package converter. According to the converter
you use, the pin numbers of an MCU allocated to CN1 and CN2. For details on pin correspondence, see 7. Correspondence
of Connectors CN1 and CN2 (pages 4 to 8).
Figure 3 Usage of the PCA7759
M30800T-CPE etc.
Package converters
- M30800T-PTC
- M3T-FLX-144NSD
- M3T-FLX-144NSE
- M3T-F160-100NSD
- M3T-F160-128NRD, etc.
PC4701 emulator
MCU signal measurement board
PCA7759 (this product)
Target system
CN1
CN2
CN1
CN2
PC7501 emulator Compact emulator
Emulation probe
- M30830T-EPB
- M30700T-EPB
- M3062PT-EPB, etc.
M3T-FLX160-PRB
6. Precautions CAUTION
Cautions to Be Taken for This Product:
•When you remove the PCA7759, be sure to remove it carefully. Otherwise the connector may be
damaged.
•Do not use a screw driver or the like to remove the PCA7759. Otherwise the pattern on a board may be
damaged.
•We cannot accept any request for repair.
•If there is any question or doubt about this product or this instruction manual, contact the following.
Renesas Tools Homepage http://www.renesas.com/en/tools
NOTE: To remove the PCA7759, be sure not to use any
tools. Using a screwdriver may cause a damage of the
pattern on a board.

( 4 / 8 )
CN1- 1a GND CN1- 1b 18 CN2- 1a GND CN2- 1b 19
CN1- 2a 17 CN1- 2b 16 CN2- 2a 20 CN2- 2b 21
CN1- 3a 15 CN1- 3b 14 CN2- 3a 22 CN2- 3b 23
CN1- 4a 13 CN1- 4b 12 CN2- 4a 24 CN2- 4b 25
CN1- 5a 11 CN1- 5b 10 CN2- 5a 26 CN2- 5b 27
CN1- 6a 9 CN1- 6b 8 CN2- 6a 28 CN2- 6b 29
CN1- 7a 7 CN1- 7b 6 CN2- 7a 30 CN2- 7b 31
CN1- 8a 5 CN1- 8b 4 CN2- 8a 32 CN2- 8b 33
CN1- 9a 3 CN1- 9b 2 CN2- 9a 34 CN2- 9b 35
CN1- 10a 1 CN1- 10b GND CN2- 10a 36 CN2- 10b GND
CN1- 11a GND CN1- 11b 144 CN2- 11a GND CN2- 11b 37
CN1- 12a 143 CN1- 12b 142 CN2- 12a 38 CN2- 12b 39
CN1- 13a 141 CN1- 13b 140 CN2- 13a 40 CN2- 13b 41
CN1- 14a 139 CN1- 14b 138 CN2- 14a 42 CN2- 14b 43
CN1- 15a 137 CN1- 15b 136 CN2- 15a 44 CN2- 15b 45
CN1- 16a 135 CN1- 16b 134 CN2- 16a 46 CN2- 16b 47
CN1- 17a 133 CN1- 17b 132 CN2- 17a 48 CN2- 17b 49
CN1- 18a 131 CN1- 18b 130 CN2- 18a 50 CN2- 18b 51
CN1- 19a 129 CN1- 19b 128 CN2- 19a 52 CN2- 19b 53
CN1- 20a 127 CN1- 20b GND CN2- 20a 54 CN2- 20b GND
CN1- 21a GND CN1- 21b 126 CN2- 21a GND CN2- 21b 55
CN1- 22a 125 CN1- 22b 124 CN2- 22a 56 CN2- 22b 57
CN1- 23a 123 CN1- 23b 122 CN2- 23a 58 CN2- 23b 59
CN1- 24a 121 CN1- 24b 120 CN2- 24a 60 CN2- 24b 61
CN1- 25a 119 CN1- 25b 118 CN2- 25a 62 CN2- 25b 63
CN1- 26a 117 CN1- 26b 116 CN2- 26a 64 CN2- 26b 65
CN1- 27a 115 CN1- 27b 114 CN2- 27a 66 CN2- 27b 67
CN1- 28a 113 CN1- 28b 112 CN2- 28a 68 CN2- 28b 69
CN1- 29a 111 CN1- 29b 110 CN2- 29a 70 CN2- 29b 71
CN1- 30a 109 CN1- 30b GND CN2- 30a 72 CN2- 30b GND
CN1- 31a GND CN1- 31b 108 CN2- 31a GND CN2- 31b 73
CN1- 32a 107 CN1- 32b 106 CN2- 32a 74 CN2- 32b 75
CN1- 33a 105 CN1- 33b 104 CN2- 33a 76 CN2- 33b 77
CN1- 34a 103 CN1- 34b 102 CN2- 34a 78 CN2- 34b 79
CN1- 35a 101 CN1- 35b 100 CN2- 35a 80 CN2- 35b 81
CN1- 36a 99 CN1- 36b 98 CN2- 36a 82 CN2- 36b 83
CN1- 37a 97 CN1- 37b 96 CN2- 37a 84 CN2- 37b 85
CN1- 38a 95 CN1- 38b 94 CN2- 38a 86 CN2- 38b 87
CN1- 39a 93 CN1- 39b 92 CN2- 39a 88 CN2- 39b 89
CN1- 40a 91 CN1- 40b GND CN2- 40a 90 CN2- 40b GND
(-: No connection)
CN1 No IC No.
7. Correspondence of Connectors CN1 and CN2
Here follows pin correspondence of each package converter.
If your package converter is not listed here, refer to the correspondence table at the end of the instruction manual of your
package converter. For the latest information including manuals, visit the Renesas Tools Homepage
http://www.renesas.com/en/tools
Table 2 Connector correspondence (Using M3T-FLX-144NSE and M3T-FLX-144NSD)
CN1 No. IC No. CN2 No. IC No.CN2 No. IC No.

( 5 / 8 )
Table 3 Connector correspondence (Using M3T-F160-128NRD)
CN1- 1a - CN1- 1b 16 CN2- 1a - CN2- 1b 17
CN1- 2a 15 CN1- 2b 14 CN2- 2a 18 CN2- 2b 19
CN1- 3a 13 CN1- 3b 12 CN2- 3a 20 CN2- 3b 21
CN1- 4a 11 CN1- 4b - CN2- 4a 22 CN2- 4b 23
CN1- 5a - CN1- 5b - CN2- 5a 24 CN2- 5b 25
CN1- 6a - CN1- 6b - CN2- 6a 26 CN2- 6b 27
CN1- 7a 10 CN1- 7b 9 CN2- 7a 28 CN2- 7b 29
CN1- 8a 8 CN1- 8b 7 CN2- 8a 30 CN2- 8b 31
CN1- 9a 6 CN1- 9b 5 CN2- 9a 32 CN2- 9b 33
CN1- 10a 4 CN1- 10b - CN2- 10a 34 CN2- 10b -
CN1- 11a - CN1- 11b 3 CN2- 11a - CN2- 11b 35
CN1- 12a 2 CN1- 12b 1 CN2- 12a 36 CN2- 12b 37
CN1- 13a 128 CN1- 13b 127 CN2- 13a 38 CN2- 13b 39
CN1- 14a 126 CN1- 14b 125 CN2- 14a 40 CN2- 14b 41
CN1- 15a 124 CN1- 15b 123 CN2- 15a 42 CN2- 15b 43
CN1- 16a 122 CN1- 16b 121 CN2- 16a 44 CN2- 16b 45
CN1- 17a 120 CN1- 17b - CN2- 17a 46 CN2- 17b 47
CN1- 18a 119 CN1- 18b - CN2- 18a 48 CN2- 18b 49
CN1- 19a 118 CN1- 19b 117 CN2- 19a 50 CN2- 19b 51
CN1- 20a 116 CN1- 20b - CN2- 20a 52 CN2- 20b -
CN1- 21a - CN1- 21b 115 CN2- 21a - CN2- 21b 53
CN1- 22a 114 CN1- 22b 113 CN2- 22a 54 CN2- 22b -
CN1- 23a 112 CN1- 23b 111 CN2- 23a 55 CN2- 23b -
CN1- 24a 110 CN1- 24b 109 CN2- 24a 56 CN2- 24b 57
CN1- 25a 108 CN1- 25b - CN2- 25a 58 CN2- 25b 59
CN1- 26a - CN1- 26b - CN2- 26a 60 CN2- 26b 61
CN1- 27a - CN1- 27b - CN2- 27a 62 CN2- 27b 63
CN1- 28a 107 CN1- 28b 106 CN2- 28a 64 CN2- 28b 65
CN1- 29a 105 CN1- 29b 104 CN2- 29a 66 CN2- 29b 67
CN1- 30a 103 CN1- 30b - CN2- 30a 68 CN2- 30b -
CN1- 31a - CN1- 31b 102 CN2- 31a - CN2- 31b 69
CN1- 32a 101 CN1- 32b 100 CN2- 32a - CN2- 32b 70
CN1- 33a 99 CN1- 33b 98 CN2- 33a - CN2- 33b 71
CN1- 34a 97 CN1- 34b 96 CN2- 34a 72 CN2- 34b 73
CN1- 35a 95 CN1- 35b 94 CN2- 35a 74 CN2- 35b 75
CN1- 36a 93 CN1- 36b 92 CN2- 36a 76 CN2- 36b 77
CN1- 37a 91 CN1- 37b 90 CN2- 37a 78 CN2- 37b 79
CN1- 38a 89 CN1- 38b 88 CN2- 38a 80 CN2- 38b 81
CN1- 39a 87 CN1- 39b 86 CN2- 39a 82 CN2- 39b 83
CN1- 40a 85 CN1- 40b - CN2- 40a 84 CN2- 40b -
(-: No connection)
CN1 No IC No. CN1 No. IC No. CN2 No. IC No.CN2 No. IC No.

( 6 / 8 )
Table 4 Connector correspondence (Using M3T-FLX-120NSE)
CN1- 1a - CN1- 1b 15 CN2- 1a - CN2- 1b 16
CN1- 2a 14 CN1- 2b 13 CN2- 2a 17 CN2- 2b 18
CN1- 3a 12 CN1- 3b 11 CN2- 3a 19 CN2- 3b 20
CN1- 4a 10 CN1- 4b - CN2- 4a 21 CN2- 4b 22
CN1- 5a 9 CN1- 5b - CN2- 5a 23 CN2- 5b 24
CN1- 6a 8 CN1- 6b - CN2- 6a 25 CN2- 6b 26
CN1- 7a 7 CN1- 7b 6 CN2- 7a 27 CN2- 7b 28
CN1- 8a 5 CN1- 8b 4 CN2- 8a - CN2- 8b -
CN1- 9a 3 CN1- 9b 2 CN2- 9a - CN2- 9b -
CN1- 10a 1 CN1- 10b - CN2- 10a 29 CN2- 10b -
CN1- 11a - CN1- 11b - CN2- 11a - CN2- 11b 30
CN1- 12a 120 CN1- 12b 119 CN2- 12a 31 CN2- 12b 32
CN1- 13a 118 CN1- 13b 117 CN2- 13a 33 CN2- 13b 34
CN1- 14a 116 CN1- 14b - CN2- 14a - CN2- 14b -
CN1- 15a - CN1- 15b 115 CN2- 15a 35 CN2- 15b 36
CN1- 16a 114 CN1- 16b 113 CN2- 16a 37 CN2- 16b 38
CN1- 17a 112 CN1- 17b 111 CN2- 17a 39 CN2- 17b 40
CN1- 18a 110 CN1- 18b 109 CN2- 18a - CN2- 18b -
CN1- 19a 108 CN1- 19b 107 CN2- 19a - CN2- 19b 41
CN1- 20a - CN1- 20b - CN2- 20a 42 CN2- 20b -
CN1- 21a - CN1- 21b - CN2- 21a - CN2- 21b -
CN1- 22a 106 CN1- 22b 105 CN2- 22a 43 CN2- 22b 44
CN1- 23a 104 CN1- 23b 103 CN2- 23a 45 CN2- 23b 46
CN1- 24a 102 CN1- 24b 101 CN2- 24a 47 CN2- 24b 48
CN1- 25a 100 CN1- 25b 99 CN2- 25a 49 CN2- 25b 50
CN1- 26a 98 CN1- 26b 97 CN2- 26a 51 CN2- 26b 52
CN1- 27a 96 CN1- 27b 95 CN2- 27a 53 CN2- 27b 54
CN1- 28a 94 CN1- 28b 93 CN2- 28a 55 CN2- 28b 56
CN1- 29a 92 CN1- 29b 91 CN2- 29a 57 CN2- 29b 58
CN1- 30a 90 CN1- 30b - CN2- 30a 59 CN2- 30b -
CN1- 31a - CN1- 31b 89 CN2- 31a - CN2- 31b 60
CN1- 32a - CN1- 32b - CN2- 32a 61 CN2- 32b 62
CN1- 33a - CN1- 33b - CN2- 33a 63 CN2- 33b 64
CN1- 34a 88 CN1- 34b 87 CN2- 34a 65 CN2- 34b 66
CN1- 35a 86 CN1- 35b 85 CN2- 35a 67 CN2- 35b 68
CN1- 36a 84 CN1- 36b 83 CN2- 36a 69 CN2- 36b 70
CN1- 37a 82 CN1- 37b 81 CN2- 37a 71 CN2- 37b 72
CN1- 38a 80 CN1- 38b 79 CN2- 38a - CN2- 38b -
CN1- 39a 78 CN1- 39b 77 CN2- 39a 73 CN2- 39b 74
CN1- 40a 76 CN1- 40b - CN2- 40a 75 CN2- 40b -
(-: No connection)
CN1 No IC No. CN1 No. IC No. CN2 No. IC No.CN2 No. IC No.

( 7 / 8 )
Table 5 Connector correspondence (Using M3T-F160-100NSD)
CN1- 1a - CN1- 1b 9 CN2- 1a - CN2- 1b 10
CN1- 2a 8 CN1- 2b 7 CN2- 2a 11 CN2- 2b 12
CN1- 3a 6 CN1- 3b - CN2- 3a 13 CN2- 3b 14
CN1- 4a - CN1- 4b - CN2- 4a 15 CN2- 4b 16
CN1- 5a - CN1- 5b - CN2- 5a 17 CN2- 5b 18
CN1- 6a - CN1- 6b - CN2- 6a 19 CN2- 6b 20
CN1- 7a 5 CN1- 7b 4 CN2- 7a 21 CN2- 7b 22
CN1- 8a 3 CN1- 8b 2 CN2- 8a 23 CN2- 8b 24
CN1- 9a 1 CN1- 9b 100 CN2- 9a 25 CN2- 9b 26
CN1- 10a 99 CN1- 10b - CN2- 10a 27 CN2- 10b -
CN1- 11a - CN1- 11b 98 CN2- 11a - CN2- 11b 28
CN1- 12a 97 CN1- 12b 96 CN2- 12a 29 CN2- 12b 14
CN1- 13a 95 CN1- 13b 94 CN2- 13a 30 CN2- 13b 12
CN1- 14a 93 CN1- 14b 92 CN2- 14a 31 CN2- 14b 32
CN1- 15a 91 CN1- 15b 90 CN2- 15a 33 CN2- 15b 34
CN1- 16a 89 CN1- 16b 88 CN2- 16a 35 CN2- 16b 36
CN1- 17a 87 CN1- 17b 60 CN2- 17a - CN2- 17b -
CN1- 18a - CN1- 18b 62 CN2- 18a - CN2- 18b -
CN1- 19a - CN1- 19b - CN2- 19a 37 CN2- 19b 38
CN1- 20a - CN1- 20b - CN2- 20a 39 CN2- 20b -
CN1- 21a - CN1- 21b - CN2- 21a - CN2- 21b 40
CN1- 22a - CN1- 22b - CN2- 22a - CN2- 22b 12
CN1- 23a - CN1- 23b 86 CN2- 23a - CN2- 23b 14
CN1- 24a 85 CN1- 24b 84 CN2- 24a - CN2- 24b -
CN1- 25a 83 CN1- 25b - CN2- 25a 41 CN2- 25b 42
CN1- 26a - CN1- 26b - CN2- 26a 43 CN2- 26b 44
CN1- 27a - CN1- 27b - CN2- 27a - CN2- 27b -
CN1- 28a 82 CN1- 28b 81 CN2- 28a - CN2- 28b 45
CN1- 29a 80 CN1- 29b 79 CN2- 29a 46 CN2- 29b 47
CN1- 30a 78 CN1- 30b - CN2- 30a 48 CN2- 30b -
CN1- 31a - CN1- 31b 77 CN2- 31a - CN2- 31b 49
CN1- 32a 76 CN1- 32b 75 CN2- 32a 14 CN2- 32b 50
CN1- 33a 74 CN1- 33b 73 CN2- 33a 12 CN2- 33b 51
CN1- 34a 72 CN1- 34b 71 CN2- 34a 52 CN2- 34b 53
CN1- 35a 70 CN1- 35b 69 CN2- 35a 54 CN2- 35b 55
CN1- 36a 68 CN1- 36b 67 CN2- 36a 56 CN2- 36b 57
CN1- 37a 66 CN1- 37b 65 CN2- 37a 58 CN2- 37b 59
CN1- 38a 64 CN1- 38b 63 CN2- 38a - CN2- 38b -
CN1- 39a 62 CN1- 39b 61 CN2- 39a - CN2- 39b -
CN1- 40a 60 CN1- 40b - CN2- 40a - CN2- 40b -
(-: No connection)
CN1 No IC No. CN1 No. IC No. CN2 No. IC No.CN2 No. IC No.

( 8 / 8 )
Table 6 Connector correspondence (Using M30800T-PTC)
CN1- 1a GND CN1- 1b 11 CN2- 1a GND CN2- 1b 12
CN1- 2a 10 CN1- 2b 9 CN2- 2a 13 CN2- 2b 14, 64
CN1- 3a 8 CN1- 3b - CN2- 3a 15 CN2- 3b 16
CN1- 4a - CN1- 4b - CN2- 4a 17 CN2- 4b 18
CN1- 5a - CN1- 5b - CN2- 5a 19 CN2- 5b 20
CN1- 6a - CN1- 6b - CN2- 6a 21 CN2- 6b 22
CN1- 7a 7 CN1- 7b 6 CN2- 7a 23 CN2- 7b 24
CN1- 8a 5 CN1- 8b 4 CN2- 8a 25 CN2- 8b 26
CN1- 9a 3 CN1- 9b 2 CN2- 9a 27 CN2- 9b 28
CN1- 10a 1 CN1- 10b GND CN2- 10a 29 CN2- 10b GND
CN1- 11a GND CN1- 11b 100 CN2- 11a GND CN2- 11b 30
CN1- 12a 99 CN1- 12b 98 CN2- 12a 31 CN2- 12b 16
CN1- 13a 97 CN1- 13b 96 CN2- 13a 32 CN2- 13b 14, 64
CN1- 14a 95 CN1- 14b 94 CN2- 14a 33 CN2- 14b 34
CN1- 15a 93 CN1- 15b 92 CN2- 15a 35 CN2- 15b 36
CN1- 16a 91 CN1- 16b 90 CN2- 16a 37 CN2- 16b 38
CN1- 17a 89 CN1- 17b 62 CN2- 17a - CN2- 17b -
CN1- 18a - CN1- 18b 14, 64 CN2- 18a - CN2- 18b -
CN1- 19a - CN1- 19b - CN2- 19a 39 CN2- 19b 40
CN1- 20a - CN1- 20b GND CN2- 20a 41 CN2- 20b GND
CN1- 21a GND CN1- 21b - CN2- 21a GND CN2- 21b 42
CN1- 22a - CN1- 22b - CN2- 22a - CN2- 22b 14, 64
CN1- 23a - CN1- 23b 88 CN2- 23a - CN2- 23b 16
CN1- 24a 87 CN1- 24b 86 CN2- 24a - CN2- 24b -
CN1- 25a 85 CN1- 25b - CN2- 25a 43 CN2- 25b 44
CN1- 26a - CN1- 26b - CN2- 26a 45 CN2- 26b 46
CN1- 27a - CN1- 27b - CN2- 27a - CN2- 27b -
CN1- 28a 84 CN1- 28b 83 CN2- 28a - CN2- 28b 47
CN1- 29a 82 CN1- 29b 81 CN2- 29a 48 CN2- 29b 49
CN1- 30a 80 CN1- 30b GND CN2- 30a 50 CN2- 30b GND
CN1- 31a GND CN1- 31b 79 CN2- 31a GND CN2- 31b 51
CN1- 32a 78 CN1- 32b 77 CN2- 32a 16 CN2- 32b 52
CN1- 33a 76 CN1- 33b 75 CN2- 33a 14, 64 CN2- 33b 53
CN1- 34a 74 CN1- 34b 73 CN2- 34a 54 CN2- 34b 55
CN1- 35a 72 CN1- 35b 71 CN2- 35a 56 CN2- 35b 57
CN1- 36a 70 CN1- 36b 69 CN2- 36a 58 CN2- 36b 59
CN1- 37a 68 CN1- 37b 67 CN2- 37a 60 CN2- 37b 61
CN1- 38a 66 CN1- 38b 65 CN2- 38a - CN2- 38b -
CN1- 39a 14, 64 CN1- 39b 63 CN2- 39a - CN2- 39b -
CN1- 40a 62 CN1- 40b GND CN2- 40a - CN2- 40b GND
(-: No connection)
CN1 No IC No. CN1 No. IC No. CN2 No. IC No.CN2 No. IC No.