Reptile One 46527 Operating manual

YEAR
GUARANTEE
2+1
Product Information Sheet
© Copyright Reptile One 2010
Next Best Thing to Nature...
Reptile One Heat Mats are designed to
create heat zones within the enclosure that
help maintain natural heat gradients. The
new range of Reptile One Heat Mats have been
designed to include a built-in thermal safety cut
off, eliminating the need for the heat mat to be
run on a thermostat and ensuring safety from
potential overheating. Available in various sizes.
Suitable for: Terrestrial Snakes,
Lizards, Geckos
Heat Mats 240V
Code Description Dimensions Wattage Voltage Inner
Ctn. Outer Ctn.
46527 Reptile One Heat Mats 5W 14 x 15cm 5W 240V 1 36
46528 Reptile One Heat Mats 7W 15 x 28cm 7W 240V 1 36
46529 Reptile One Heat Mats 14W 28 x 28cm 14W 240V 1 24
46530 Reptile One Heat Mats 20W 42 x 28cm 20W 240V 1 24
• Builtinthermalsafetycuto
• Thermalsafetycutosetat50°C
• Provideswarmthtoreptilesatnight
• Noneedforthermostat
• Aidsindigestion
Product Information
Heat Mats
Features & Benets:
#46528#46527 #46529 #46530
New,
advanced
design!

www.reptileone.com.au
Product Information Sheet
THISHEATMATISDESIGNEDTOBEUSEDWITHGLASSENCLOSURESONLY.
1. Reptile One Heat Mats are designed with plastic stick on feet. Remove the feet from the paper and attach them to the
corners of the enclosure. The 14W and 20W models are supplied with 6 feet, the extra feet should be placed half way along
the longest edges of the enclosure.
2. Attach the mat under the enclosure in the desired location by taping the transparent edges of the mat to the underside of
the enclosure and switch the mat on at the power outlet.
Installation
Notes, Hints & Tips
1. It is important that the heat mat does not cover more than 1/4 to 1/2 of the base area of the enclosure.
2. The mat should not be placed directly beneath another heat source such as a heat lamp. Reptile One Heat Mats are
designed to operate 24/7 to provide a thermal option for the reptile.
3. All models include a built-in thermal cut off which means the mat does not need to be run on a thermostat. With the
thermal cut off set to 50°C, this should provide temperatures in the 30’s once the heat has travelled through the glass
and a thin layer of substrate, providing adequate heat to keep your reptile warm. Ensure an adequate thermal gradient is
provided in your environment design for the species being housed.
Warnings & Disclaimers:
1. This appliance in not intended for use by children or infirm persons without supervision. Young children should be supervised
to ensure that they do not interfere with the appliance.
2. Do not operate product if it has a damaged cord or plug.
3. Always unplug the mat from the electrical outlet when not in use, before putting on or taking off parts, before any type of
maintenance or cleaning.
4. This product is not designed to be used in water and should be kept dry at all times. do not install or store the product where it
will be exposed to weather or temperatures below freezing
5. Ensure input voltage is the same voltage as your power supply.
6. A Ground fault circuit interpreter and surge protector is recommended for all appliances.
7. If in doubt about the electrical installation or safety of this product, you must consult a qualified technician.
8. Misuse of this heat mat or failure to follow instructions as directed by the manufacturer will result in the warranty being voided.
9. Should Reptile One Heat Mats be used with any other enclosure other than glass terrariums, the warranty of this heat mat is null
and void. This Heat Mat MUST only be used on the outside of glass terrariums as directed.