ResMed S8 AutoScore II User manual

1
S8 AutoScore™ II System
Clinical Quick Setup Guide
Setup is quick and easy … Just Go!
The following settings have been pre-set to accommodate typical patient treatment
values.
S8 AutoScore II
Important: Remove this guide
before handing the device to the
patient. Pressures should only be
adjusted by qualified personnel.
Start CPAP: 6 cm H2O
CPAP: 10 cm H2O
Ramp: 20 minutes
Max Ramp: 30 minutes
Humid: None
SmartStart: Off
Reminders: Off
Mask: Ultra
Leak Alert: Off
Tube Length: 2 m
Language: English
Smart Data: On
Auto Appear: On
Patient Menu: Std
EPR: Off
EPR Level: 0
EPR Inhale: Med
EPR Access: Off

2
3
See the Clinical Guide for full details.
1
Accessing the clinical menu
Turn on the device and wait until the standby (RAMP) screen appears on the LCD. At•
this stage you can adjust the ramp time.
Press• and simultaneously for three seconds to access the clinical menu.
3
Changing options and settings
Press• to access standard machine settings, eg, Start CPAP pressure.
Use• and to scroll through the RESULTS, OPTIONS and SERVICING
menu screens.
From a menu screen, use• to access the parameters in that menu.
Use• and to scroll through menu parameters.
Use• to view or change each parameter setting as required.
Press• until you return to the standby (RAMP) screen.
2
Accessing the quickview menu
Press• and simultaneously for three seconds to access the quickview
menu.

2
3
S8 AutoScore II clinical menus
RAMP: 10 min
menu

CLINICAL MENU
WELCOME
CLINICAL
menu exit
SETTINGS
enter

exit
RESULTS
enter

exit
OPTIONS
enter

exit
Settings Menu:
screens
Options Menu:
screens
SERVICING
enter

exit
RUN HRS: 8888

exit
SN:12345678912

exit
PCB: 123456789123
4567

exit
SW: SX4800100

exit
BR: 19200
change

exit

4
5
S8 AutoScore II clinical menus
Settings Menu: screens
SETTINGS
enter

exit
MODE: CPAP
change

exit
START CPAP: 4.0
change 
exit
CPAP: 10.0
change 
exit
MAX RAMP: 30
change 
exit
MASK: ULTRA
change 
exit
TUBE LENGTH: 2m
change 
exit
HUMID: NONE
change 
exit
SMARTSTART: ON
change 
exit
LEAK ALERT: OFF
change 
exit
EPR: RAMP ONLY
change 
exit
EPR LEVEL: 1
change 
exit
EPR INHALE: MED
change exit
EPR ACCESS: OFF
change exit

4
5
Options Menu: screens
S8 AutoScore II clinical menus
Note: For each reminder, you can set a time period for that reminder to keep re-occurring.
For these recurring reminders to work, you must set the date for the first occurrence of the
reminder as well as a recurrence time period.
For example, if you set MASK: 30Jun2008 and MASK RECUR: 6mth, the first reminder to
replace the mask is displayed on 30 June 2008. The recurring reminder occurs 6 months from
the date the reminder is acknowledged by the patient. The reminder will continue to recur at
6-month intervals unless it is set to OFF or the recurrence period is changed.
OPTIONS
enter

exit
SMART DATA
enter

exit
MASK FIT: ON
change

exit
REMINDERS
enter

exit
FACTORY DEFAULTS
reset

exit
ERASE DATA?
yes

exit
DATE: 20 Dec 2006
change

exit
TIME: 15:54
change

exit
MENU TYPE: ADV
change

exit
LANG:ENGLISH
change

exit
PRESSURE: ON
change

exit
USAGE: ON
change

exit
AUTO APPEAR: ON
change

exit
MASK: 16Feb2007
change

exit
MASK RECUR: 6mth
change

exit
CALL RECUR: OFF
change

exit
CARD RECUR: OFF
change

exit
FILT RECUR: 6mth
change

exit
SERV RECUR:24mth
change

exit
CUST RECUR: OFF
change

exit
CALL: 16Feb2007
change

exit
CARD: 16Feb2007
change

exit
FILT: 16Feb2007
change

exit
SERV: 16Feb2007
change

exit
CUST: OFF
change

exit