ResMed S8 AutoSet Spirit II User manual

1
S8 AutoSet Spirit™ II System
Clinical Quick Setup Guide
Setup is quick and easy . . . Just Go!
The following settings have been pre-set to accommodate typical patient treatment values.
CPAP mode AutoSet mode
Start CPAP: 6 cm H2O Min Press: 4 cm H2O
CPAP: 10 cm H2O Max Press: 20 cm H2O
Ramp: 20 minutes Settling: 20 minutes
Max Ramp: 30 minutes Max Settling: 30 minutes
Humid: None Humid: None
SmartStart: Off SmartStart: Off
Reminders: Off Reminders: Off
Mask: Ultra Mask: Ultra
Leak Alert: Off Leak Alert: Off
Tube Length: 2 m Tube Length: 2 m
Language: English Language: English
Smart Data: On Smart Data: On
Auto Appear: On Auto Appear: On
Patient Menu: Std Patient Menu: Std
EPR: Off EPR: Off
EPR Level: 0 EPR Level: 0
EPR Inhale: Med EPR Access: Off
EPR Access: Off
Important: Remove this guide before
handing the device to the patient.
Pressures should only be adjusted by
qualified personnel.

2
3
See the Clinical Guide for full details.
1
Accessing the clinical menu
Turn on the device and wait until the standby (RAMP/SETTLING) screen appears on•
the LCD. At this stage you can adjust the ramp/settling time.
Press• and simultaneously for three seconds to access the clinical menu.
3
Changing options and settings
Press• to access the SETTINGS menu screen.
Use• and to scroll through the RESULTS, OPTIONS and SERVICING
menu screens.
From a menu screen, use• to access the parameters in that menu.
Use• and to scroll through menu parameters.
Use• to view or change each parameter setting as required.
Press• until you return to the standby (RAMP/SETTLING) screen.
2
Accessing the quickview menu
Press• and simultaneously for three seconds to access the quickview
menu.

2
3
S8 AutoSet Spirit II clinical menus
CPAP
MODE AUTOSET
MODE
RAMP: 10 min
menu SETTLING: 10 min
menu
SERVICING
enter exit
OPTIONS
enter exit
CLINICAL MENU
CLINICAL
menu exit
WELCOME
RESULTS
enter exit
SETTINGS
enter exit
BR: 19200
change exit
RUN HRS: 8888
exit
SN:12345678912
exit
PCB: 123456789123
4567 exit
SW: SX4800100
exit
Settings Menu:
screens
Options Menu:
screens

4
5
S8 AutoSet Spirit II clinical menus
Settings Menu: screens
AUTOSET MODECPAP MODE
SETTINGS
enter exit
MODE: CPAP
change exit
START CPAP: 4.0
change exit
TUBE LENGTH: 2m
change exit
change exit
HUMID: NONE
MAX RAMP: 30
change exit
MASK: ULTRA
change exit
CPAP: 10.0
change exit
SMARTSTART: ON
change exit
EPR: RAMP ONLY
change exit
EPR LEVEL: 1
change exit
EPR INHALE: MED
change exit
LEAK ALERT: OFF
change exit
MODE: AUTOSET
change exit
MIN PRESS: 7.0
change exit
MAX PRESS: 20
change exit
TUBE LENGTH: 2m
change exit
LEAK ALERT: OFF
change exit
MAX SETTLING: 30
change exit
MASK: ULTRA
change exit
change exit
HUMID: NONE
SMARTSTART: ON
change exit
EPR ACCESS: OFF
change exit
EPR: SETTLE ONLY
change exit
EPR LEVEL: 1
change exit
EPR ACCESS: OFF
change exit

4
5
Options Menu: screens
S8 AutoSet Spirit II clinical menus
Note: For each reminder, you can set a time period for that reminder to keep re-occurring.
For these recurring reminders to work, you must set the date for the first occurrence of the
reminder as well as a recurrence time period.
For example, if you set MASK: 30Jun2008 and MASK RECUR: 6mth, the first reminder to
replace the mask is displayed on 30 June 2008. The recurring reminder occurs
6 months from the date the reminder is acknowledged by the patient. The reminder will
continue to recur at 6-month intervals unless it is set to OFF or the recurrence period is
changed.
OPTIONS
enter

exit
SMART DATA
enter

exit
MASK FIT: ON
change

exit
REMINDERS
enter

exit
FACTORY DEFAULTS
reset

exit
ERASE DATA?
yes

exit
DATE: 20 Dec 2006
change

exit
TIME: 15:54
change

exit
MENU TYPE: ADV
change

exit
LANG:ENGLISH
change

exit
PRESSURE: ON
change

exit
USAGE: ON
change

exit
AUTO APPEAR: ON
change

exit
MASK: 16Feb2007
change

exit
MASK RECUR: 6mth
change

exit
CALL RECUR: OFF
change

exit
CARD RECUR: OFF
change

exit
FILT RECUR: 6mth
change

exit
SERV RECUR:24mth
change

exit
CUST RECUR: OFF
change

exit
CALL: 16Feb2007
change

exit
CARD: 16Feb2007
change

exit
FILT: 16Feb2007
change

exit
SERV: 16Feb2007
change

exit
CUST: OFF
change

exit

6
7
S8 AutoSet Spirit II quickview menu
...
...
...
...
...
...
MODE: CPAP
exit
START CPAP: 4.0
exit
CPAP: 10.0
exit
MAX RAMP: 30
exit
MASK: ULTRA
exit
TUBE LENGTH: 2m
exit
HUMID: NONE
exit
SMARTSTART: ON
exit
LEAK ALERT: OFF
exit
EPR: RAMP ONLY
exit
EPR LEVEL: OFF
exit
EPR INHALE: MED
exit
LEAK: 0.70 L/s
day... exit
AHI: 4
day... exit
AI: 3
day... exit
LEAK: NO DATA
yr... exit
AHI: NO DATA
yr... exit
AI: NO DATA
yr... exit
USAGE: 1000/1068
exit
USAGE: 7.45 hrs
days... exit
PRESS: 10.2
day... exit PRESS: NO DATA
yr... exit
USED HRS: 0800
exit
EPR ACCESS: OFF
exit
HI: 2
day... exit HI: NO DATA yr... exit
RUN HRS: 00000
exit
USAGE: 7.2 hrs
yr... exit
REVIEW
enter exit SETTINGS
enter exit
RESULTS
enter exit
USAGE DATA
enter exit
EFFICACY DATA
enter exit
AUTOSET MODECPAP MODE
MODE: AUTOSET
exit
MIN PRESS: 4.0
exit
MAX PRESS: 20
exit
MAX SETTLING: 30
exit
MASK: ULTRA
exit
TUBE LENGTH: 2m
exit
HUMID: NONE
exit
SMARTSTART: ON
exit
LEAK ALERT: OFF
exit
EPR: SETTLE ONLY
exit
EPR LEVEL: OFF
exit
EPR ACCESS: OFF
exit

6
7
This screen only appears if access is set by clinician.
S8 AutoSet Spirit II patient menus
Detailed menus
RAMP: 10min
menu
WELCOME
>>>>>>
SETTINGS
enter exit
SETTLING: 10min
menu
WELCOME
>>>>>>
EPR LEVEL: 1
change exit
CPAP AUTOSET
MASK: ULTRA
change exit
AUTOSETCPAP
USED HRS: 08000
exit
USAGE: 1000/1068
exit
RESULTS
enter exit
SERVICING
enter exit
OPTIONS
enter exit
LANG: ENGLISH
change exit
SN: 12345678912
exit
PCB: 123456789123
4567 exit
SW: SX4800100
exit
TUBE LENGTH: 2m
change exit
HUMID: NONE
change exit
SMARTSTART: ON
change exit
LEAK ALERT: OFF
change exit
SMART DATA
enter exit
SMART DATA
enter exit
AUTO APPEAR: OFF
change cancel
TUBE LENGTH: 2m
change exit
HUMID: NONE
change exit
SMARTSTART: ON
change exit
LEAK ALERT: OFF
change exit
MASK: ULTRA
change exit
EPR LEVEL: 1
change exit

8
Global leaders in sleep and respiratory medicine www.resmed.com
S8 AutoSet Spirit II patient menus
Standard menus
This screen only appears if access is set by clinician.
RAMP: 10min
menu
WELCOME
>>>>>>
SETTLING: 10min
menu
CPAP
WELCOME
>>>>>>
AUTOSET
MASK: ULTRA
change exit
SW: SX4800100
exit
USED HRS: 08000
exit
USAGE: 1000/1068
exit
MASK: ULTRA
change exit
SW: SX4800100
exit
USED HRS: 08000
exit
USAGE: 1000/1068
exit
EPR LEVEL: 1
change exit
EPR LEVEL: 1
change exit
ResMed Ltd(Manufacturer)1ElizabethMacarthurDriveBellaVistaNSW2153Australia•ResMedCorp(USDesignatedAgent)14040
DanielsonStreetPowayCA92064-6857USA•ResMed (UK) Ltd (EU Authorised Representative) 96 Milton Park Abingdon Oxfordshire
OX144RYUK•ResMed Offices Australia, Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland,
Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, UK, USA
(see www.resmed.com for contact details).
Protected by patents: AU 691200, AU 697652, AU 709279, AU 724589, AU 730844, AU 736723, AU 750095, AU 750761, AU 764761, AU
779327, AU 2002231456, CN 02804930.6, EP 0651971, EP 0661071, EP 0920845, EP 0934723, EP 1028769, EP 1126893, EP 1502618,
EP 1144036, JP 3580776, JP 3778797, NZ 504595, US 5199424, US 5245995, US 5522382, US 5704345, US 6138675, US 6240921, US
6363933, US 6367474, US 6425395, US 6502572, US 6591834, US 6705315, US 6745768, US 6817361, US 6988498, US 7040317, US
7100608. Other patents pending.
Protected by design registrations: AU 302180, AU 302181, AU 302182, AU 302183, AU 302184, AU 302185, AU 302186, CN
200430121212.2, CN 200430121213.7, CN 200430121211.8, CN 200430121214.1, CN 200430121215.6, CN 200430121216.0, CN
200430121217.5, EU 269436, EU 815071, HK 0412901.9, JP 1257662, JP 1257663, JP 1266956, JP 1266957, JP 1267270, JP 1267271, NZ
405614, NZ 406923, NZ 406924, NZ 406925, NZ 406926, NZ 406927, NZ 406928, US D544598, US D553228, US D557406, US D557407, US
D560795, US D561891, US D565160. Others pending.
S8 AutoSet Spirit and SmartStart are trademarks of ResMed Ltd and AutoSet is registered in U.S. Patent and Trademark Office.
©2008 ResMed Ltd. 338598/1 08 07