Restoration Hardware Baby&Child Mercantile stacking bin User manual

WARNING: ADULT ASSEMBLY ONLY OWING TO THE PRESENCE OF SMALL
PARTS, SHARP POINTS AND EDGES
Customer Service - If you are missing parts or have any questions about this product, please contact
us at: 1-800-762-1751
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint-free cloth.
Blot spills immediately, and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our
lacquered finish.
WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.
Maximum height is 3 units high.
Please install metal brackets to connect multiple units.
When the item is stationary, please turn the wheels towards the front and lock. This is to offer
best stability.
ASSEMBLY STEPS:
1 - Metal bracket installation to connect units.
2 - Furniture tipping restraint installation (for units 2 and 3 levels high).
PARTS INCLUDED:
A [2 or 3] Single Stacking Bin
HARDWARE INCLUDED:
B [2 or 4] Metal brackets
C [8 or 16] Wood screws 7x15mm
STEP 1 - METAL BRACKET INSTALLATION:
TOOLS NEEDED:
Phillips head screwdriver (not provided)

ASSEMBLY INSTRUCTIONS:
- Place [4] Metal Brackets (B) over the pre-drilled holes on back of middle unit and secure to base
and top unit using [16] Wood Screws (C).
Diagram 3
B
C
Diagram 2

FURNITURE TIPPING RESTRAINT:
Young children may be injured by tipping furniture and the use of a tipping restraint is highly
recommended. When properly installed, this restraint could provide protection against the unexpected
tipping of furniture due to small tremors, bumps or climbing. We recommend mounting this restraint to
a wall stud.
(4) Phillip screws M4x20mm
(4) Plastic anchors
TOOLS NEEDED:
- Phillips head screwdriver (not provided)
Please note: Tipping restraint reccomended for all units, 2 and 3 units high. Tipping restraint
plastic brackets (x2) should be installed on the back of the highest unit.
HARDWARE LIST:
(4) Plastic brackets
(2) Restraint straps
(4) Phillip screws M4x30mm
STEP 2 - FURNITURE TIPPING RESTRAINT INSTALLATION:
WARNING:
When the item is stationary, please
ensure to turn the wheels towards front
and lock. This is to offer best stability.