REVCAMUK MON16 User manual

4
6. The gridlines will show up with a V in the top le corner, use the plus and
minus to move the grid up and down, when it is where you want press
MEN.
7. You will now have the guidelines visible with V in the top le corner, use
the plus and minus to move the gridlines either wider or narrower. When
you are happy with the width press MEN.
8. You should re-enter the main Park Setup menu, ensure Line 2 is set to
ON.
9. Then scroll down to Line number and press MEN.
10. The original grid displays for the purpose of seng the numbers.
11. Use the plus and minus to alter the distance numbers to the real world
distances you wish to set, pressing MEN aer each adjustment to get to
the next line.
To acvate the Parking Lines the green trigger wire needs to be aached to a
reverse light feed. The camera will need to be in channel 2 as this is the auto
trigger channel.
Interval Cong Menu
You should ignore this menu
Cam Delay
This sets the delay on the trigger wire, if you set it to 3 seconds it means the
camera will stay on channel 2 for 3 seconds aer the last power from the
trigger. This is useful if you have a side camera which auto selects when le
indicator is powered on. If you had it set to 0 seconds then the camera would ash
on and o with the indicator, if you had it set at 3 seconds the camera would stay
1
Tech Specs
7” Colour LCD screen
Audio Output: 0.5W
Loudspeaker: one 15x40mm round loudspeaker
Power supply: 12V/24V
Power Consumpon: 4W Max
Digital Screen Resoluon: 800 x3(RGB)x480
Contrast: 500:1
Brightness: 400cd/m2
Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70
degrees
Operang Temperature: -10C to +65C
Storage Temperature: -30C to +80C RH90%
2 Inputs
PAL/NTSC/AUTO
Mirror/Normal Switch on both channels
Full funcon Remote Control

2
Buons on monitor
There are 6 buons on your new monitor “-“ “+” “MEN” “CAM” “MOD” “POW”.
POW is used to power on and o.
MOD is used to ick between night mode and day mode (to allow you to reduce
glare quickly at night).
CAM is used to ick between the two channels.
MEN is used to enter the Menu system and once inside the menu is then used as an
enter buon.
“-“ and “+” is used to adjust sengs inside the menu system.
Adjusng sengs in Menu
To enter Menu press MEN.
To scroll up and down use the plus and minus buons, when you see the menu
seng you want to adjust please press MEN to enter.
3
Picture Menu
This has all the sengs for Brightness, contrast and colour.
Language Menu
This allows you to change the language of the menu (be careful you don’t change to
an obscure language you don’t understand)
Mirroring Menu
Allows you to alter the way camera 1 and camera 2 is displayed (eg if you have a
mirror camera on channel 1 you could ip it horizontally to make it a normal view
camera).
Video Menu
Allows you to select PAL/NTSC/AUTO (we recommend just leaving it on AUTO)
Opon Menu
Allows you to select from preset display opons : Standard/So/Vivid/Light. Also
allows you to change between 16:9 and 4:3 display.
Imperial (FT) Metric (M) Menu
Clicking this allows you to select how the guideline numbers are displayed, whether
in  or M.
Park Setup Menu
You only need to worry about LINE 2 (ignore LINE 1).
1. Press MEN to enter the Main Menu
2. Scroll down using the plus and minus buon unl you reach Park Setup
3. Press MEN to enter Park Setup
4. Scroll down to Line 2 setup
5. Press MEN to enter Line 2 setup.