Revo RCBS20-1 User manual

Indoor / Outdoor
IR Night Vision Camera
Instruction Manual
VER.:1.0, NO.: R040557A

2
3. Feature
Built-in high quality CCD camera and high performance infrared
illuminator module.
Total pixels of sensor: NTSC=270K pixels.
High sensitivity, low smea r,
excellent anti-blooming, and high S/N ratio.
Supports functions: Auto Electronic Shutter (AES), Auto Gain
Control (AGC), Auto White Balance (AWB), Back Light
Compensation (BLC), and Flickerless mode (FL).
Built-in board Lens and furnished with mounting bracket.
Low DC power consumption.
Dual Window Structure .
3-Axis Concealed Cable Bracket.
Waterproofing criterion: IP66.
Item Name of Part Quantity
1 Infrared Camera 1
2
Bag 1
A Fix Retaining Screw for Bracket 3
B Anchor 3
3 Instruction Manual 1
4. Content

3
5. Installation & Operation
1. Install Preparation
Drill hole in wall if wire needs to go through the wall.
2. Install Camera
Use the 3 screws provided to attach the camera and bracket to the
ceiling, surface or wall.

4
3. Adjust 3-Axis Bracket
Adjust the bracket while checking the view angle from the monitor.
Loosen the bracket lock knob by turning counterclockwise, after
adjusting the 3-Axis bracke t (X-Y-Z Axis) to ge t the desi red
viewing angle, tighten the lock knob by turning it clockwise.
4. Install Sunshi del
To install the sunshield, please follow the instruction shown below:

RCBS20-1