Revolution Micro Avici 750 User manual

120/240/277v or 347v
Avici Integrated LED Lighting System
Owner's Manual June 1, 2022
The Box Contains
Avici 750 Integrated LED Lighting System
Power Cord (NEMA 6-15P standard)
Two (2) RJ-14 Data Cables
RJ-14 Dual Splitter
Two custom wire light hangers
Congratulations on your new Avici 750. The Avici combines an array of
Osram LEDs with our custom-designed drivers for one amazing,
programmable spectrum, computer-controlled grow lighting system.
This manual will tell you how to hang, connect and operate your new Avici.
404/334-9788
info@revmicro.com
Installing and Powering Up
Remove the protective cap from the power socket.
1.
Align the sections on the
socket with those on the
power cable. They’ll only
fit together one way.
3.
The bars need to be arranged in the following pattern so
the power flows through one bar to the next. The ends of the
bar are labeled either IN or OUT, and should be alternated with
consideration for how it will be wired.
IN
IN
IN
OUT OUT
OUT
2.
Use the two provided
metal hangers to attach
the Avici 750 to your ceiling
or racking system by
hooking them through
the two metal tabs.
4.

Avici 750 LED lights have a wide-input power supply of 120/240/277
volts and can be ordered with various power cords. The
Avici 347v version is direct-wire with a 3 meter pigtail cable
attached. Each
Avici 750
comes with two (2)
communication
cables two meters
long and one
splitter as shown
in the image.
Communications Wiring
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
Hanger
Hanger
170.5 / 6.72
435 / 17.13
110 / 4.33
238 / 9.37
121.6 / 4.79
435 / 17.13
528 / 20.79
455 / 17.91
528 / 20.79
TOP VIEW
Scale 1 : 5
FRONT VIEW
Scale 1 : 5
SIDE VIEW
Scale 1 : 5
ISOMETRIC VIEW
Scale 1 : 5
SIZE : W435(17.13) x L528(20.79) x H110(4.33) mm.(Inch)
Net Weight : 16.5 Kg.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL
06/03/2020
DWG. Date
DRAWN
CHK'D
APPV'D
REVISION:
Format А3
2
2 1
A
1
DWG NO.
DIMENSIONS ARE IN
MATERIAL:
SHEET 1 OF 6
R-DW-AS-079
06/03/20
-
A
FINISH:
signature and date: signature and date:
signature and date:
CUSTORMER
signature and date:
AVICI LED 1000W
scale
THIRD ANGLE
PROJECTION
signature and date:
DESIGN
Revolution Microelectronics Co.,Ltd.
Tikumporn
Somchai
Sorakrai
Greg Richter
mm. / Inch
Tikumporn
1 : 5
404/334-9788
info@revmicro.com
Rotate the locking ring until it begins
to thread onto the socket. Continue
to push the plug into the socket until
it is rmly plugged in, and tighten the
locking ring.
Attach cable to power supply to the controller.
LOCKING RING
6.
7.
Please see controller manual for communications Instructions.
8.
Installing and Powering Up Continued
These are the data cables we supply. If you get longer or dierent ones,
make sure they are wired like this.
Data Cables and Connections
Push the cable into the
socket until it won’t go
any further.
5.
Look at the cable ends in the pic to the
right and you’ll see the wires are the
same by color, pin 1 to 1, pin 2 to 2, etc.
on each connector.
We have tested and recommend these cables:
Digikey Part Number A2662R-07-ND, 7’ long.
Digikey Part Number A2662R-25-ND, 25’ long.
RevMicro has the right cables of all sizes should you need them,
or http://digikey.com is a good source in the USA.
Data Cables and Connections Continued

Avici 750 LED lights have a wide-input power supply of 120/240/277 volts,
and can be ordered with various power cords as noted below. The Avici
347v version is direct-wire, with a 3 meter pigtail cable attached.
AVICI1150W-US120
Plug: NEMA5-15P
AVICI1150W-US240
Plug: NEMA6-15P
AVICI1150W-AUS
AVICI1150W-UK
AVICI1150W-EURO
AVICI1150W-277
Plug: NEMA L7-15P
USA, Canada
USA, Canada
Australia, New Zealand,
China, Argentina
UK, Ireland, Singapore
Europe (except UK)
USA, Canada, Europe
These are available by
special order for projects
that require a locking
connector.
Power Cables
Hangers and Dimensions
Hangers & Dimensions
Hook provided hangers
into holes in black end caps.
1061mm \ 42”
331mm \ 13”
76mm \ 3”
We’re Here to Help.
We’d be happy to answer any questions or help you
through the installation.
404/334-9788info@revmicro.com 404/334-9788
info@revmicro.com

404/334-9788info@revmicro.com 404/334-9788
info@revmicro.com
Blinking LEDs – What Your Avici Is Telling You
Blinks Once A Second – Over Temperature
If the Avici internal heatsink reaches a programmed over tem-
perature point, it's way too hot and it will shut o with the OFF
LED blinking on and o once a second. Once the internal tem-
perature cools to 10 degrees below the over temp point, the
Avici will automatically restart.
Blinks Four Times A Second – Over Voltage
or Under Voltage
If supplied power is outside safe operating range for the Avici,
the LED will ash quickly to let you know the xture is working
but not going to come on.
If the status LED is ashing quickly you can either remove and
reapply power, but best to check the electrical supply rst.
Incorrect supply voltage can destroy the xture. Avici normal
voltage range is 100v-300v and must be stable for 10 seconds
to power up.
Flickers Briey Once a Second – External Control
The RLC1 and TouchMi Room Controller can control 512
Revolution lights in two zones. You can set on and o times,
sunrise and sunset ramps, dimming with temperature and
over temperature shutdown for each zone for lights that sup-
port these commands. Avici also accepts commands for color
mixing for custom spectra. Please see the RLC1 and TouchMi
manuals for details on controlling the output spectrum.
When the provided RJ-14 phone cable is plugged into the
Avici and a Revolution controller, the front panel LED will
blink o, very briey, once a second to show you that Avici is
controlled by an outside source and that communication is up
and running.
If the cable becomes disconnected, Avici will maintain chosen
power level and spectrum – just as you would expect. After a
power failure, Avici returns to full power and spectrum if not
commanded otherwise by a controller.
Problem Solving

Specifications
The Avici Integrated LED Lighting System has been tested
at FCC-certied laboratories in the United States and
conforms to FCC’s Part 15B Consumer standard for both
conducted and radiated emissions.
Given that all electronic equipment emits some RF energy,
please note that compliance with these standards does
not mean a zero level of emission, only a very low level
of emission.
The FCC requires that we also state:
This product may cause interference to radio
equipment and should not be installed near maritime
safety communications equipment or other critical
navigation or communication equipment operating
between 0.45-30 MHz.
This device complies with Part 15 of the FCC Rules.
Changes or modications not expressly approved by
Revolution Microelectronics could void the user’s
authority to operate the equipment.
FCC Compliance Statement
Avici 750W
404/334-9788
info@revmicro.com
Spectrum
PPF
Max Wattage
Input Current
Input Voltage
Input Power Plug
Power Factor
Light Source
Rated Life
Operational Temperature
Fixture Temperature
Ingress Rating
RMH (Recommended Mounted Height Above Canopy)
Dimming / Spectrum Control
Dimensions
Programmable
2,310 μMole/sec dimmable in 1% steps
750w
6.25 A @ 120 volts, 3.13 A @ 240 volts, 2.7 A @ 277 volts
120/240/277 volts AC, 50/60 Hz or 347v 50/60 Hz
NEMA 6-15P (240v) or NEMA 5 or NEMA L7P
0.99 @ 120 volts
Osram OSLON LED array
> 150,000 hours
35C
55C
IP67
> 18”
External Controller
331mm x 1061mm x 76mm (
~
13” x 42” x 3”) 17.5 kg (
~
38.6 lbs)
Table of contents
Other Revolution Micro Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands

Osram
Osram OTi50W Installation and troubleshooting guide

Arlec
Arlec ABL104 installation instructions

Glow Bricks
Glow Bricks HarryPotter Hogwarts Express Collector's Edition Lego... installation guide

Lightolier
Lightolier Calculite C7E170HW specification

Clevertronics
Clevertronics Argonaut PLUS Installation & maintenance

Velleman
Velleman HQ Power VDP250SC6 manual