RH Baby&child ALEXANDRA TUFTED TODDLER User manual

Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
10640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
ALEXANDRA TUFTED TODDLER BED CONVERSION KIT INSTRUCTIONS
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part. Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
NOTE: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 12- 34of a turn. After crib is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly
WARNING: Read all instructions before
assembling this product. KEEP
INSTRUCTIONS FOR FUTURE USE.
Page 1 of 7

IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS
WARNING: ENTRAPMENT / STRANGULATION
HAZARD
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could
result in serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes
may strangle a child.
● The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51-5/8 inches (1310mm) in length, 27-1/4 inches (690mm) in
width and 4 inches (100 mm) in thickness, not exceeding 6 inches (152 mm) in thickness.
● If guardrails are used as the mattress containment means, guardrail(s) provided must
be used to avoid the formation of a gap between the mattress and the bed that could
cause an entrapment.
● DO NOT place bed near windows where cords from blinds or drapes may strangle a
child.
● DO NOT place items with a string, cord, or ribbon around a child’s neck, such as hood
strings or pacifier cords.
● DO NOT suspend strings over a toddler bed for any pacifier cords.
● A child using the toddler or day bed shall be at least 15 months of age and shall not
weigh more than 50lbs (22.7kgs).
Page 2 of 7

WARNING: ADULT ASSEMBLY ONLY, OWING TO THE PRESENCE OF
SMALL PARTS, SHARP POINTS AND EDGES.
CAUTION
TODDLER BED: THE MINIMUM AGE SHALL NOT BE LESS THAN 15 MONTHS AND
THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50LBS. (22.7 KG).
THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS
HAVING MINIMUM DIMENSIONS OF 51-5/8 IN. (1310MM) IN LENGTH, 27-1/4 IN(690MM)IN WIDTH
AND 4 IN. (100MM) IN THICKNESS NOT EXCEEDING 6 IN. (152MM) IN THICKNESS.
CARE INSTRUCTIONS:
• Dust often using a clean, soft, dry, lint- free cloth.
• Blot spills immediately, and wipe with a clean, damp cloth.
•We do not recommend the use of chemical cleaners, abrasives, or furniture polish on our lacquered
finish.
TODDLER KIT ASSEMBLY
HARDWARE IS INCLUDED IN
THE TODDLER KIT BOX.
ALLEN WRENCH = 1 PC
1/4" x 1/2" BOLT = 4 PCS
END PANEL
MATTRESS SUPPORT
SIDE RAIL
TODDLER RAIL
Page 3 of 7

ASSEMBLY INSTRUCTIONS
STEP #1. CRIB DISASSEMBLY
DETAIL A
DETAIL B
(CC)
(AA)
STEP #1.1:
Remove the front rail panel of the crib by loosening all the bolts installed,
as in DETAIL A.
STEP #1.2:
Lay down the crib and remove the bolts underneath the metal brackets
holding the stabilizer rails as in DETAIL B. Remove the mattress
support and the stabilizer rails from the metal bracket on the end panels.
STEP #1.3:
Disassemble the back rail panel and the end panels by loosening all the
bolts installed. Refer to step #1.1.
Page 4 of 7

STEP #2. TODDLER RAIL ASSEMBLY.
C
D
D
E
(AA)
DETAIL D
DETAIL C
C
C
E
E
DETAIL E
ALLEN BOLT
Ø1/4" X 1/2"
OPTION 1
OPTION 2
NOTE: For the toddler bed, you can replace the front side rail panel
with a toddler rail, or you also can replace both side rail panels with
two toddler rails.
STEP #2.1
On inside face of both end panels have a cavity for the hook which
corresponds to the hooks on both ends of the toddler rails . Align
and insert the hook of the toddler rail into the cavity of the end
panel. See DETAIL C.
Attach the back side rail panel to the end panels if you decide to
use the bed with one side rail panel and one toddler rail. See
DETAIL D.
STEP #2.2
Fill the holes located on the top of both sides of the end panel by
inserting Allen bolt provided. See DETAIL E.
Page 5 of 7

G
STEP #3
MATTRESS SUPPORT HEIGHT ADJUSTMENT
DETAIL G
ALLEN BOLT
(BB)
MATTRESS
SUPPORT
STABILIZER RAIL
LOCK
WASHER
HEX NUT
PLAIN
WASHER ALLEN
WRENCH
DETAIL F
HARDWARE
LOCK WASHER = 8 PCS
PLAIN WASHER = 8 PCS
HEXAGONAL NUT = 8 PCS
OPEN WRENCH = 1 PC
ALLEN WRENCH = 1 PC
ALLEN BOLT
(BB)
ALLEN BOLT
(BB)
ALLEN BOLT
(BB)
(BB) 1/4" X 1-1/4" BOLT = 8 PCS
NOTE: If mattress supports is not in the lowest position.
STEP #3.1 loosen and remove all bolts (BB) on both sides of the frame
of mattress support.
STEP #3.2 Re-install the bolt on the third hole of the frame through the
hole on the arm support. Fasten the bolt with plain washers, lock
washers & hexagonal nut. Repeat procedure on the other arms of the
mattress support. See DETAIL F & DETAIL G.
Page 6 of 7

STEP #4
INSTALLATION OF STABILIZER RAILS
INTO THE END PANEL
DETAIL H
(CC)
DETAIL I
STEP #4.1
On inside face of both end panels are pre-installed metal
brackets, designed to hold the stabilizer rails. Set both ends
of the stabilizer rails into brackets, as illustrated in DETAIL H.
STEP #4.2
Once the stabilizer rails are set, hold the mattress support
and lay down the toddler bed then fasten the stabilizer rails
with bolt, with plain washer and lock washer. See DETAIL I.
NOTE
After assembly, re-tighten all bolts to a snug fit.
Page 7 of 7