Ricoh M052 User manual
M052/M053/M054
SERVICE MANUAL
It is the reader's responsibility when discussing the information contained
within this document to maintain a level of confidentiality that is in the best
interest of Ricoh Americas Corporation and its member companies.
NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY
FASHION AND DISTRIBUTED WITHOUT THE PRIOR
PERMISSION OF RICOH AMERICAS CORPORATION.
All product names, domain names or product illustrations, including
desktop images, used in this document are trademarks, registered
trademarks or the property of their respective companies.
They are used throughout this book in an informational or editorial fashion
only and for the benefit of such companies. No such use, or the use of
any trade name, or web site is intended to convey endorsement or other
affiliation with Ricoh products.
©2011 RICOH Americas Corporation. All rights reserved.
The Service Manual contains information
regarding service techniques, procedures,
processes and spare parts of office equipment
distributed by Ricoh Americas Corporation.
Users of this manual should be either service
trained or certified by successfully completing a
Ricoh Technical Training Program.
Untrained and uncertified users utilizing
information contained in this service manual to
repair or modify Ricoh equipment risk personal
injury, damage to property or loss of warranty
protection.
Ricoh Americas Corporation
WARNING
LEGEND
PRODUCT
CODE COMPANY
LANIER RICOH SAVIN
M052 SP5200S
SP 5200SHW*
SP 5200SHT*
Aficio SP5200S
Aficio SP 5200SHW*
Aficio SP 5200SHT*
SP5200S
SP 5200SHW*
SP 5200SHT*
M053 SP5210SF
SP 5210SFHW*
SP 5210SFHT*
Aficio SP5210SF
Aficio SP 5210SFHW*
Aficio SP 5210SFHT*
SP5210SF
SP 5210SFHW*
SP 5210SFHT*
M054 SP5210SR Aficio SP5210SR SP5210SR
*HC (Healthcare models)
DOCUMENTATION HISTORY
REV. NO. DATE COMMENTS
* 11/2011 Original Printing
SM i M052/M053/M054
M052/M053/M054
TABLE OF CONTENTS
1.PRODUCT INFORMATION.......................................................... 1-1
1.1SPECIFICATIONS..................................................................................... 1-1
1.2OVERVIEW................................................................................................ 1-2
1.2.1MECHANICAL COMPONENT LAYOUT........................................... 1-2
1.2.2DRIVE LAYOUT ............................................................................... 1-3
1.2.3PAPER PATH................................................................................... 1-4
Standard Model (M052)/ Fax and 1 Bin Tray Unit Model (M053)......... 1-4
Finisher Model (M054) ......................................................................... 1-5
1.3MACHINE CONFIGURATION ................................................................... 1-6
1.3.1MACHINE CONFIGURATION.......................................................... 1-6
Controller Devices................................................................................ 1-8
2.INSTALLATION............................................................................ 2-1
2.1INSTALLATION REQUIREMENTS............................................................ 2-1
2.1.1ENVIRONMENT ............................................................................... 2-1
2.1.2MACHINE LEVEL............................................................................. 2-1
2.1.3MINIMUM OPERATIONAL SPACE REQUIREMENTS .................... 2-2
2.1.4POWER REQUIREMENTS .............................................................. 2-2
2.2OPTIONAL UNIT COMBINATIONS........................................................... 2-3
2.2.1MACHINE OPTIONS........................................................................ 2-3
Fax Options.......................................................................................... 2-3
2.2.2CONTROLLER AND OTHER OPTIONS.......................................... 2-4
Controller Options................................................................................ 2-4
Other Options....................................................................................... 2-4
2.3COPIER..................................................................................................... 2-5
2.3.1ACCESSORY CHECK...................................................................... 2-5
2.3.2INSTALLATION PROCEDURE ........................................................ 2-6
Copier settings..................................................................................... 2-6
Fax Settings only for M053 model........................................................ 2-9
When Using an Smart Card Reader..................................................... 2-9
2.3.3METER CLICK CHARGE ............................................................... 2-11
2.4PAPER FEED UNIT TK1090 (M375)....................................................... 2-13
2.4.1INSTALLATION PROCEDURE ...................................................... 2-13
M052/M053/M054 ii SM
2.5PAPER FEED UNIT TK1100 (M376)....................................................... 2-15
2.5.1INSTALLATION PROCEDURE ...................................................... 2-15
When installing the three units (M375 and M376).............................. 2-17
2.6FAX OPTION TYPE SP5200 (M381)....................................................... 2-18
2.6.1COMPONENT CHECK................................................................... 2-18
2.6.2INSTALLATION PROCEDURE ...................................................... 2-19
2.7COPY DATA SECURITY UNIT TYPE F (B829)....................................... 2-23
2.7.1COMPONENTS CHECK................................................................. 2-23
2.7.2INSTALLATION.............................................................................. 2-24
User Tool Setting ............................................................................... 2-25
2.8CONTROLLER OPTIONS ....................................................................... 2-26
2.8.1OVERVIEW .................................................................................... 2-26
SD Card Slots .................................................................................... 2-26
I/F Card Slot....................................................................................... 2-26
USB Slots........................................................................................... 2-26
2.8.2SD CARD APPLI MOVE................................................................. 2-27
Overview............................................................................................ 2-27
Move Exec ......................................................................................... 2-28
Undo Exec.......................................................................................... 2-29
2.8.3FILE FORMAT CONVERTER (D377)............................................. 2-30
Installation Procedure ........................................................................ 2-30
2.8.4IEEE 802.11 A/G, G (D377: WIRELESS LAN) ............................... 2-31
Installation Procedure ........................................................................ 2-31
UP Mode Settings for Wireless LAN .................................................. 2-33
SP Mode and UP Mode Settings for IEEE 802.11 a/g, g Wireless LAN2-35
2.8.5BLUETOOTH INTERFACE UNIT TYPE D (D566) ......................... 2-36
Installation Procedure ........................................................................ 2-36
2.8.6BROWSER UNIT TYPE E (D430) .................................................. 2-37
Installation Procedure ........................................................................ 2-37
Update Procedure.............................................................................. 2-38
2.8.7GIGABIT ETHERNET BOARD TYPE A (G874)/ TYPE C (M397).. 2-39
Installation Procedure ........................................................................ 2-39
2.8.8IPDS UNIT TYPE 5210 (D571)....................................................... 2-40
Installation Procedure ........................................................................ 2-40
2.8.9MEMORY UNIT TYPE B 32MB (G578).......................................... 2-41
Installation Procedure ........................................................................ 2-41
2.8.10CHECK ALL CONNECTIONS .................................................... 2-41
2.9 OPTIONAL COUNTER UNIT INTERFACE TYPE A....................... 2-42
SM iii M052/M053/M054
3.PREVENTIVE MAINTENANCE....................................................3-1
3.1MAINTENANCE TABLES.......................................................................... 3-1
3.1.1USER MAINTENANCE..................................................................... 3-1
3.1.2SERVICE MAINTENANCE............................................................... 3-1
3.2PM PARTS SETTINGS.............................................................................. 3-2
3.2.1BEFORE REMOVING THE OLD PM PARTS................................... 3-2
3.2.2AFTER INSTALLING THE NEW PM PARTS ................................... 3-2
3.2.3OPERATION CHECK....................................................................... 3-2
4.REPLACEMENT AND ADJUSTMENT ........................................4-1
4.1PRECAUTIONS......................................................................................... 4-1
4.1.1GENERAL......................................................................................... 4-1
AIO....................................................................................................... 4-1
Transfer Roller ..................................................................................... 4-1
Scanner Unit ........................................................................................ 4-1
Laser Unit............................................................................................. 4-2
Fusing Unit........................................................................................... 4-2
Paper Feed .......................................................................................... 4-2
4.1.2LITHIUM BATTERIES....................................................................... 4-2
4.1.3HALOGEN-FREE CABLE................................................................. 4-2
4.2SPECIAL TOOLS AND LUBRICANTS ...................................................... 4-3
4.3ADJUSTING COPY IMAGE AREA............................................................ 4-4
4.3.1PRINTING......................................................................................... 4-4
Adjusting Registration .......................................................................... 4-4
Adjusting Blank Margin......................................................................... 4-6
Adjusting Main-Scan Magnification ...................................................... 4-7
4.3.2SCANNING....................................................................................... 4-7
Adjusting Registration .......................................................................... 4-7
Adjusting Magnification ........................................................................ 4-8
4.3.3DF IMAGE ADJUSTMENT ............................................................... 4-9
4.4EXTERIOR COVERS .............................................................................. 4-11
4.4.1LEFT COVER................................................................................. 4-11
4.4.2RIGHT COVER............................................................................... 4-12
4.4.3REAR LOWER COVER.................................................................. 4-13
4.4.4FRONT DOOR................................................................................ 4-14
4.4.5DUPLEX UNIT................................................................................ 4-15
4.4.6OPERATION PANEL UNIT............................................................. 4-16
Operation Panel Unit.......................................................................... 4-16
Key Tops............................................................................................ 4-18
M052/M053/M054 iv SM
4.4.7TOUCH PANEL POSITION ADJUSTMENT................................... 4-20
4.4.8OUTPUT TRAY (M052/M053 MODELS ONLY) ............................. 4-21
4.5SCANNER UNIT...................................................................................... 4-22
4.5.1SCANNER FRONT COVER........................................................... 4-22
4.5.2SCANNER RIGHT AND LEFT COVERS........................................ 4-23
Scanner Right Cover.......................................................................... 4-23
Scanner Left Cover ............................................................................ 4-23
4.5.3SCANNER REAR COVER.............................................................. 4-24
4.5.4EXPOSURE GLASS....................................................................... 4-25
When reassembling the ARDF exposure glass.................................. 4-25
4.5.5LED BOARD................................................................................... 4-26
4.5.6SCANNER MOTOR........................................................................ 4-29
4.5.7SENSOR BOARD UNIT (SBU)....................................................... 4-30
When reassembling ........................................................................... 4-30
4.5.8LED DRIVE BOARD....................................................................... 4-31
4.5.9SCANNER HP SENSOR................................................................ 4-32
4.5.10COVER SENSOR....................................................................... 4-33
4.5.11FRONT SCANNER WIRE........................................................... 4-34
Reinstalling the Front Scanner Wire................................................... 4-35
4.5.12REAR SCANNER WIRE............................................................. 4-38
Reinstalling the Rear Scanner Wire ................................................... 4-39
4.6LASER OPTICS....................................................................................... 4-40
4.6.1CAUTION DECAL LOCATIONS..................................................... 4-40
4.6.2SAFETY SWITCHES FOR LASER UNIT ....................................... 4-41
4.6.3LASER UNIT................................................................................... 4-41
Preparation before Removing the Laser Unit..................................... 4-41
Removing the Laser Unit for All Models............................................. 4-42
4.6.4POLYGON MOTOR........................................................................ 4-43
4.6.5LASER SYNCHRONIZATION DETECTOR.................................... 4-44
4.7PAPER TRANSFER ................................................................................ 4-45
4.7.1TRANSFER ROLLER..................................................................... 4-45
4.8DRIVE SECTION..................................................................................... 4-46
4.8.1GEARBOX...................................................................................... 4-46
4.8.2MAIN MOTOR ................................................................................ 4-47
4.8.3DUPLEX MOTOR........................................................................... 4-48
4.8.4BY-PASS FEED CLUTCH.............................................................. 4-49
4.8.5RELAY CLUTCH ............................................................................ 4-49
4.8.6PAPER FEED CLUTCH.................................................................. 4-50
SM v M052/M053/M054
4.8.7REGISTRATION CLUTCH ............................................................. 4-50
4.9PAPER FEED.......................................................................................... 4-51
4.9.1PAPER FEED ROLLER.................................................................. 4-51
4.9.2FRICTION PAD .............................................................................. 4-52
When reassembling the friction pad................................................... 4-52
4.9.3PAPER END SENSOR................................................................... 4-53
4.9.4REMAINING PAPER SENSORS.................................................... 4-53
4.9.5REGISTRATION SENSOR............................................................. 4-54
4.9.6BY-PASS PAPER SENSOR........................................................... 4-54
4.9.7DUPLEX RELAY SENSOR............................................................. 4-55
When reassembling the duplex relay sensor...................................... 4-55
4.9.8JUNCTION GATE 1 SOLENOID .................................................... 4-56
4.9.9JUNCTION GATE 2 SOLENOID .................................................... 4-57
4.9.10FUSING EXIT SENSOR (M053 MODEL ONLY) ........................ 4-58
4.9.11PAPER OVERFLOW SENSOR (M052/M053 MODELS ONLY). 4-58
4.10FUSING.............................................................................................. 4-59
4.10.1FUSING UNIT............................................................................. 4-59
4.10.2HOT ROLLER AND PRESSURE ROLLER SECTIONS............. 4-60
4.10.3FUSING LAMP ........................................................................... 4-61
4.10.4HOT ROLLER............................................................................. 4-62
4.10.5FUSING THERMISTOR ............................................................. 4-63
4.10.6THERMOSTATS......................................................................... 4-63
4.10.7PRESSURE ROLLER................................................................. 4-64
4.10.8FUSING CLEANING ROLLER.................................................... 4-64
4.11DUPLEX UNIT ................................................................................... 4-65
4.11.1DUPLEX UNIT............................................................................ 4-65
4.11.2DUPLEX INVERTER MOTOR.................................................... 4-66
4.11.3DUPLEX EXHAUST FAN ........................................................... 4-67
4.11.4DUPLEX INVERTER SENSOR.................................................. 4-69
4.11.5DUPLEX ENTRANCE SENSOR................................................. 4-70
4.12ELECTRICAL COMPONENTS .......................................................... 4-71
4.12.1CONTROLLER UNIT.................................................................. 4-71
4.12.2HDD UNIT................................................................................... 4-72
4.12.3HDD CONTROL BOARD............................................................ 4-73
4.12.4NVRAM....................................................................................... 4-73
When reinstalling a new NVRAM....................................................... 4-74
4.12.5EEPROMS.................................................................................. 4-76
When reinstalling a new EEPROM..................................................... 4-76
M052/M053/M054 vi SM
4.12.6DIMM RAM................................................................................. 4-77
4.12.7CONTROLLER BOARD ............................................................. 4-78
When installing a new controller board............................................... 4-79
4.12.8BICU........................................................................................... 4-80
BICU................................................................................................... 4-80
BICU Bracket ..................................................................................... 4-81
4.12.9HVPS (HIGH VOLTAGE POWER SUPPLY).............................. 4-83
4.12.10RFID BOARD............................................................................ 4-83
4.12.11TONER END SENSOR ............................................................ 4-84
4.12.12PAPER SIZE SENSOR BOARD............................................... 4-84
4.12.13PSU.......................................................................................... 4-85
4.13ARDF ................................................................................................. 4-87
4.13.1ARDF.......................................................................................... 4-87
When installing the Platen Sheet ....................................................... 4-88
4.13.2ARDF REAR COVER ................................................................. 4-88
4.13.3ARDF FRONT COVER AND ORIGINAL TRAY.......................... 4-89
4.13.4ORIGINAL FEED UNIT............................................................... 4-90
4.13.5PICK-UP ROLLER...................................................................... 4-91
4.13.6FEED ROLLER........................................................................... 4-92
4.13.7ARDF FRICTION PAD................................................................ 4-93
4.13.8ARDF DRIVE BOARD ................................................................ 4-94
4.13.9ORIGINAL SET SENSOR AND ARDF TOP COVER SENSOR. 4-95
4.13.10ARDF FEED MOTOR............................................................... 4-97
4.13.11ARDF FEED CLUTCH.............................................................. 4-98
4.13.12ARDF TRANSPORT MOTOR................................................... 4-99
4.13.13ARDF REGISTRATION SENSOR.......................................... 4-101
4.13.14ARDF INVERTER SENSOR................................................... 4-102
4.13.15ARDF COOLING FAN ............................................................ 4-103
When installing the cooling fan......................................................... 4-103
4.14INTERNAL FINISHER...................................................................... 4-104
4.14.1INTERNAL FINISHER.............................................................. 4-104
When reinstalling the internal finisher .............................................. 4-105
4.14.2FINISHER OUTPUT TRAY UNIT ............................................. 4-106
4.14.3STAPLER UNIT........................................................................ 4-107
4.14.4GATHERING ROLLER MOTOR............................................... 4-108
4.14.5FINISHER PAPER EXIT MOTOR............................................. 4-109
4.14.6SHIFT ROLLER MOTOR.......................................................... 4-110
4.14.7FINISHER TRANSPORT MOTOR............................................ 4-111
SM vii M052/M053/M054
4.14.8TRAY LIFT MOTOR ................................................................. 4-112
4.14.9JOGGER FENCE HP SENSOR ............................................... 4-113
4.14.10JOGGER MOTOR.................................................................. 4-115
4.14.11EXIT GUIDE PLATE MOTOR................................................. 4-116
4.14.12SHIFT ROLLER HP SENSOR................................................ 4-117
4.14.13GATHERING ROLLER HP SENSOR..................................... 4-118
4.14.14FINISHER ENTRANCE SENSOR.......................................... 4-119
4.14.15FINISHER EXIT SENSOR...................................................... 4-120
4.14.16FINISHER PAPER SENSOR.................................................. 4-122
4.14.17STAPLE TRAY PAPER SENSOR.......................................... 4-123
4.14.18TRAY LOWER LIMIT SENSOR.............................................. 4-124
4.14.19EXIT GUIDE PLATE HP SENSOR......................................... 4-124
4.14.20FINISHER MAIN BOARD ....................................................... 4-125
When reinstalling a new finisher main board.................................... 4-125
4.151 BIN TRAY UNIT............................................................................ 4-126
4.15.11 BIN TRAY UNIT..................................................................... 4-126
4.15.21 BIN TRAY PAPER EXIT SENSOR........................................ 4-130
4.15.31 BIN TRAY PAPER SENSOR AND LED BOARD................... 4-131
5.SYSTEM MAINTENANCE REFERENCE..................................... 5-1
5.1SERVICE PROGRAM................................................................................ 5-1
5.1.1USING SP AND SSP MODES.......................................................... 5-1
5.1.2TYPES OF SP MODES.................................................................... 5-1
SP Mode Button Summary................................................................... 5-2
Switching Between SP Mode and Copy Mode for Test Printing........... 5-3
Selecting the Program Number............................................................ 5-3
Exiting Service Mode............................................................................ 5-4
Service Mode Lock/Unlock................................................................... 5-4
5.1.3REMARKS........................................................................................ 5-5
Display on the Control Panel Screen ................................................... 5-5
Others .................................................................................................. 5-6
5.2SYSTEM SP1-XXX.................................................................................... 5-7
5.2.1SP1-XXX (FEED).............................................................................. 5-7
5.3SYSTEM SP2-XXX.................................................................................. 5-13
5.3.1SP2-XXX (DRUM)........................................................................... 5-13
5.4SYSTEM SP3-XXX.................................................................................. 5-15
5.4.1SP3-XXX (PROCESS).................................................................... 5-15
5.5SYSTEM SP4-XXX.................................................................................. 5-16
5.5.1SP4-XXX (SCANNER).................................................................... 5-16
M052/M053/M054 viii SM
5.6SYSTEM SP5-XXX.................................................................................. 5-34
5.6.1SP5-XXX (MODE) .......................................................................... 5-34
5.7SYSTEM SP6-XXX................................................................................ 5-102
5.7.1SP6-XXX (PERIPHERALS).......................................................... 5-102
5.8SYSTEM SP7-XXX................................................................................ 5-105
5.8.1SP7-XXX (DATA LOG)................................................................. 5-105
5.9SYSTEM SP8-XXX................................................................................ 5-116
5.9.1SP8-XXX: DATA LOG2................................................................. 5-116
5.10INPUT AND OUTPUT CHECK......................................................... 5-164
5.10.1INPUT CHECK TABLE............................................................. 5-164
Mianframe........................................................................................ 5-164
ARDF ............................................................................................... 5-168
Internal Finisher ............................................................................... 5-169
5.10.2OUTPUT CHECK TABLE......................................................... 5-170
Copier............................................................................................... 5-170
ARDF ............................................................................................... 5-172
Internal Finisher ............................................................................... 5-173
5.11PRINTER SERVICE MODE............................................................. 5-174
5.11.1SP1-XXX (SERVICE MODE).................................................... 5-174
5.12SCANNER SERVICE MODE........................................................... 5-183
5.12.1SP1-XXX (SYSTEM AND OTHERS)........................................ 5-183
5.12.2SP2-XXX (SCANNING-IMAGE QUALITY) ............................... 5-185
5.13FAX SERVICE MODE...................................................................... 5-186
5.14FIRMWARE UPDATE...................................................................... 5-187
5.14.1TYPE OF FIRMWARE.............................................................. 5-187
5.14.2BEFORE YOU BEGIN.............................................................. 5-189
5.14.3UPDATING FIRMWARE........................................................... 5-190
Preparation....................................................................................... 5-190
Updating Procedure ......................................................................... 5-190
Error Messages................................................................................ 5-191
Firmware Update Error..................................................................... 5-191
Recovery after Power Loss.............................................................. 5-192
5.14.4UPDATE PROCEDURE FOR APP2ME PROVIDER................ 5-193
5.14.5BROWSER UNIT UPDATE PROCEDURE............................... 5-194
5.14.6HANDLING FIRMWARE UPDATE ERRORS........................... 5-195
Error Message Table........................................................................ 5-195
5.15SD CARD APPLI MOVE .................................................................. 5-197
5.15.1OVERVIEW .............................................................................. 5-197
SM ix M052/M053/M054
Outline of SD Card Appli Move: ....................................................... 5-197
5.15.2MOVE EXEC ............................................................................ 5-198
5.15.3UNDO EXEC ............................................................................ 5-199
5.16NVRAM DATA UPLOAD/DOWNLOAD............................................ 5-200
5.16.1UPLOADING CONTENT OF NVRAM TO AN SD CARD ......... 5-200
5.16.2DOWNLOADING AN SD CARD TO NVRAM ........................... 5-201
5.17CARD SAVE FUNCTION................................................................. 5-202
5.17.1OVERVIEW .............................................................................. 5-202
Card Save:....................................................................................... 5-202
5.17.2PROCEDURE........................................................................... 5-203
5.17.3ERROR MESSAGES................................................................ 5-205
5.18USING SP MODES.......................................................................... 5-206
5.18.1ADJUSTING REGISTRATION AND MAGNIFICATION............ 5-206
5.18.2TEST PATTERN PRINT (SP 5902).......................................... 5-206
Executing Test Pattern Printing........................................................ 5-206
Test Patterns.................................................................................... 5-206
5.18.3SMC PRINT (SP 5990)............................................................. 5-208
5.18.4 HOW TO READ THE AIO S/N (SP 5793-011).......................... 5-208
6.TROUBLESHOOTING .................................................................6-1
6.1SERVICE CALL CONDITIONS.................................................................. 6-1
6.1.1SUMMARY ....................................................................................... 6-1
6.1.2SC CODE DESCRIPTIONS.............................................................. 6-2
SC1xx: Scanning.................................................................................. 6-3
SC2xx: Laser Exposure........................................................................ 6-6
SC3xx: Image Processing – 1.............................................................. 6-8
SC4xx: Image Processing - 2............................................................... 6-8
SC5xx: Paper Feed and Fusing........................................................... 6-9
SC6xx: Device Communication.......................................................... 6-12
SC7xx: Peripherals ............................................................................ 6-17
SC8xx: Controller............................................................................... 6-20
SC9xx: Others.................................................................................... 6-28
6.2ELECTRICAL COMPONENT DEFECTS................................................. 6-32
6.2.1BLOWN FUSE CONDITIONS......................................................... 6-32
Power Supply Unit.............................................................................. 6-32
6.3JAM DETECTION.................................................................................... 6-33
6.3.1PAPER JAM DISPLAY ................................................................... 6-33
6.3.2JAM CODES AND DISPLAY CODES............................................. 6-33
M052/M053/M054 x SM
Paper Jam Detection Sensor Location............................................... 6-39
7.ENERGY SAVING........................................................................7-1
7.1ENERGY SAVE......................................................................................... 7-1
7.1.1ENERGY SAVER MODES ............................................................... 7-1
Timer Settings...................................................................................... 7-1
Return to Stand-by Mode..................................................................... 7-2
Recommendation................................................................................. 7-2
7.1.2ENERGY SAVE EFFECTIVENESS.................................................. 7-2
7.2PAPER SAVE............................................................................................ 7-4
7.2.1EFFECTIVENESS OF DUPLEX/COMBINE FUNCTION.................. 7-4
1. Duplex:............................................................................................. 7-4
2. Combine mode:................................................................................ 7-4
3. Duplex + Combine:........................................................................... 7-4
How to calculate the paper reduction ratio........................................... 7-5
M052/M053/M054 SERVICE MANUAL APPENDICES
SEE M052/M053/M054 SERVICE MANUALAPPENDICES SECTION FOR DETAILED TABLE
OF CONTENTS
FAX OPTION TYPE SP5200 (M381)
SEE M381 SECTION FOR DETAILED TABLE OF CONTENTS
PAPER FEED UNIT TK1090/TK1100/TK1120/TK1130
(M375/M376/M386/M389)
SEE M375/M376/M386/M389 SECTION FOR DETAILED TABLE OF CONTENTS
READ THIS FIRST
Safety Notices
Important Safety Notices
Prevention of Physical Injury
1. Before disassembling or assembling parts of the machine and peripherals, make sure that
the machine power cord is unplugged.
2. The wall outlet should be near the machine and easily accessible.
3. If any adjustment or operation check has to be made with exterior covers off or open while
the main switch is turned on, keep hands away from electrified or mechanically driven
components.
4. The machine drives some of its components when it completes the warm-up period. Be
careful to keep hands away from the mechanical and electrical components as the machine
starts operation.
5. The inside and the metal parts of the fusing unit become extremely hot while the machine is
operating. Be careful to avoid touching those components with your bare hands.
Health Safety Conditions
Toner is non-toxic, but if you get either of them in your eyes by accident, it may cause temporary
eye discomfort. Try to remove with eye drops or flush with water as first aid. If unsuccessful, get
medical attention.
Observance of Electrical Safety Standards
The machine and its peripherals must be serviced by a customer service representative who
has completed the training course on those models.
The Controller board on this machine contains a lithium battery. The danger of explosion
exists if a battery of this type is incorrectly replaced. Replace only with the same or an
equivalent type recommended by the manufacturer. Discard batteries in accordance with
the manufacturer's instructions and local regulations.
The optional fax and memory expansion units contain lithium batteries, which can explode
if replaced incorrectly. Replace only with the same or an equivalent type recommended by
the manufacturer. Do not recharge or burn the batteries. Used batteries must be handled in
accordance with local regulations.
Safety and Ecological Notes for Disposal
1. Do not incinerate toner bottles or used toner. Toner dust may ignite suddenly when
exposed to an open flame.
2. Dispose of used toner, the maintenance unit which includes developer or the organic
photoconductor in accordance with local regulations. (These are non-toxic supplies.)
3. Dispose of replaced parts in accordance with local regulations.
To prevent a fire or explosion, keep the machine away from flammable liquids, gases,
and aerosols. A fire or an explosion might occur.
Lithium Batteries
Incorrect replacement of lithium battery(s) on the FCU, controller board and memory board unit
may pose risk of explosion. Replace only with the same type or with an equivalent type
recommended by the manufacturer. Discard used batteries in accordance with the
manufacturer's instructions.
Laser Safety
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based
optical units in the field. The optical housing unit can only be repaired in a factory or at a
location with the requisite equipment. The laser subsystem is replaceable in the field by a
qualified Customer Engineer. The laser chassis is not repairable in the field. Customer
engineers are therefore directed to return all chassis and laser subsystems to the factory or
service depot when replacement of the optical subsystem is required.
Use of controls, or adjustment, or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
WARNING
WARNING:
Turn off the main switch before attempting any of the procedures in the Laser Optics
Housing Unit section. Laser beams can seriously damage your eyes.
CAUTION MARKING:
Symbols and Abbreviations
This manual uses several symbols and abbreviations. The meaning of those symbols and
abbreviations is as follows:
See or Refer to
Clip ring
E-ring
Screw
Connector
Clamp
SEF Short Edge Feed
LEF Long Edge Feed
- Core Technology manual
Cautions, Notes, etc.
The following headings provide special information:
Failure to obey warning information could result in serious injury or death.
Obey these guidelines to ensure safe operation and prevent minor injuries.
This information provides tips and advice about how to best service the machine.
PRODUCT INFORMATION
REVISION HISTORY
Page Date Added/Updated/New
None
Other manuals for M052
2
This manual suits for next models
9
Table of contents
Other Ricoh All In One Printer manuals
Ricoh
Ricoh Aficio 1045 Series Installation and maintenance instructions
Ricoh
Ricoh Aficio MP 5001 User manual
Ricoh
Ricoh Aficio 3224C User manual
Ricoh
Ricoh Pro C651EX User manual
Ricoh
Ricoh AC204 User manual
Ricoh
Ricoh M 2701 User manual
Ricoh
Ricoh Russian-C2a User manual
Ricoh
Ricoh Aficio SG 3110DN User manual
Ricoh
Ricoh Nashuatec D440 User manual
Ricoh
Ricoh Aficio MP 1600L User manual
Ricoh
Ricoh Aficio SP 5210SF User manual
Ricoh
Ricoh Aficio MP 5500 S/P User manual
Ricoh
Ricoh SP 230 SFNw User manual
Ricoh
Ricoh Aficio SGC 1506 User manual
Ricoh
Ricoh Pro C651EX Parts list manual
Ricoh
Ricoh Aficio MP 4001 User manual
Ricoh
Ricoh Aficio MP 2550 User manual
Ricoh
Ricoh PRO C7200S Manual
Ricoh
Ricoh DDP 92 User manual
Ricoh
Ricoh SP 330SN User manual
