CONFIGURATION GUIDE: Paper Handling Options
Ricoh MP 2554SP/MP 3054SP/MP 3554SP SERIES MULTIFUNCTION BLACKANDWHITE
1,000-Sheet Finisher (SR3140)
o250-sheet Proof Tray
o1,000-sheet Shift Tray w/ Offset Stacking
oMulti-position stapling up to 50 sheets/set
oW x D x H: 646 x 620 x 960 mm (tray open)
1000-Sheet Booklet
Finisher (SR3150)
o250-sheet Proof Tray
o1,000-sheet Shift Tray w/ Offset Stacking
oMulti-position stapling up to 50 sheets/set
oSaddle Stitch finishing for booklets up to 15
sheets (60 pages)
oW x D x H: 646 x 620 x 960 mm (tray open)
Console Type M
oElevates main unit for configuration with
an external Finisher
oSupply storage
Tray Paper Feed Unit (PB3150)
o550 sheets
oUser-adjustable up to A3
o60 - 300 g/m²
oRequires Caster Table Type M3 (shown)
oW x D x H: 587 x 685 x 120 mm
Tray Paper Feed Unit (PB3220)
o2 x 550 = 1,100 sheets
oUser-adjustable up to A3
o60 - 300 g/m²
oW x D x H: 587 x 685 x 247 mm
Large Capacity Tray (PB3230)
o2,000 sheets (Tandem 1K stacks)
oFixed for A4
o60 - 300 g/m²
oW x D x H: 587 x 685 x 247 mm
Side Large Capacity Tray
(RT3030)
o1,500 sheets
oFixed for A4
o60 - 300 g/m²
oW x D x H: 340 x 544.5 x 290 mm
500-Sheet Internal Finisher
(SR3130)
oInstalls inside original footprint of MFP
oMulti-position stapling up to 50-sheets/set
oOffset stacking
oOptional Hole Punch
Cannot be installed with the MP 6054SP
Internal Shift-Sort Tray (SH3070)1
o250-sheet capacity
oRotate & Shift Sort
1 Bin Tray (BN3110)
o125-sheet capacity
oAdditional output to separate copy from
print/fax jobs
Bridge Unit (BU3070)
oTransports pages to external Finishers
oRequired for configuration with all external
Finishers
MP 2554SP/MP 3054SP/MP 3554SP
Standard Configuration
oChoice of 25/30/35-ppm output speeds for B&W
o533 MHz CPU + 2.0 GB RAM + 320GB HDD
oB/W PCL5e/6 Printing and B/W & Full-Colour Scanning
oTilting 9” full colour control panel w/ integrated USB/SD Card slots
o2 x 550 + 100-sheet Bypass = 1,200-sheet standard paper supply
oAutomatic Duplexing
o500-sheet Output Tray
oGigabit Ethernet
oJava VM
oW x D x H: 587 x 680 x 788 mm
This illustration shows the main unit and paper handling options available for the MP 2554SP, MP 3054SP and MP 3554SP black and white MFPs.
Note that some options are not supported by all main units. Dimensions shown for items that add to the configuration footprint or height.
110-Sheet ARDF
oW x D x H: 565 x 500 x 125 mm
Platen Cover
oW x D x H: 561 x 497 x 63.8 mm
ADF Accessibility Handle Type C
oFor seated (wheelchair) users
Punch Unit PU3050 EU
o2/4 holes. Europe & Aust.
Punch Unit PU3050 NA
o3 holes. US paper sizes.
Side Tray M3
o125-sheet capacity
oAdditional exit point when no finisher is
installed
Minimum space requirements
Front: 750 mm
Left: 100 mm
Right: 500 mm
Rear: 100 mm
Punch Unit PU3040 EU
o2/4 holes. Europe & Aust.
Punch Unit PU3040 NA
o3 holes. US paper sizes.
Internal Stapleless Finisher
(SR3180)
oBind 2 - 5 sheets without a metal fastener
oInstalls inside original footprint of MFP
oSort/Stack up to 250-sheets
