Ricoh Priport JP5000 User manual

JP5000
OPERATING INSTRUCTIONS
TPEH162N
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.

JP5000 OPERATING INSTRUCTIONS
RICOH COMPANY, LTD.
15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo
Telephone: Tokyo 3479-3111
Overseas Affiliates
U.S.A.
RICOH CORPORATION
5 Dedrick Place West Caldwell, New
Jersey 07006
Phone: [phone]
The Netherlands
RICOH EUROPE B.V.
Groenelaan 3, 1186 AA, Amstelveen
Phone: [phone]
United Kingdom
RICOH UK LTD.
Ricoh House, 1 Plane Tree Cres-
cent, Feltham, Middlesex, TW13
7HG
Phone: [phone]
Germany
RICOH DEUTSCHLAND GmbH
Mergenthaler Allee 38-40, 65760
Eschborn
Phone: [phone]
France
RICOH FRANCE S.A.
383, Avenue du Général de Gaulle-
BP 307-92143 Clamart Cedex
Phone: [phone]
Spain
RICOH ESPAÑA S.A.
Av.Litral Mar, 12-14, 08005 Barcelo-
na
Phone: [phone]
Italy
RICOH ITALIA SpA
Viale Della Metallurgia 12, Zona
Basson 37139 Verona
Phone: [phone]
Hong Kong
RICOH HONG KONG LTD.
23/F., ChinaOverseas Building,139,
Hennessy Road, Wan Chai, Hong
Kong
Phone: [phone]
Singapore
RICOH ASIA PACIFIC PTE.LTD.
260 Orchard Road, #15-01/02 The
Heeren, Singapore 238855
Phone: [phone]
Printed in Japan
AE AE C229-8608A

Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Power Source:
220 – 240 V, 50/60 Hz, 1.5 A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see ⇒P.194
“Power connection” .
Notes:
Some illustrations might be slightly different from your machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the Metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh master and ink.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.

In accordance with ISO Standard 7001, this machine uses the following symbols for the main switch:
a
aa
ameans POWER ON.
b
bb
bmeans POWER OFF.
Copyright © 1998 Ricoh Co., Ltd.

i
Safety Information
When using your machine, the following safety precautions should always be
followed.
Safety During Operation
In this manual, the following important symbols are used:
Examples Of Indications
R
WARNING:
Ignoring this warning could cause serious injury or even death.
R
CAUTION:
Ignoring this caution could cause injury or damage to property.
Symbols Rmean a situation that requires you take care.
Do NOT carry out the operation represented by this symbol m.
This example means “Do not take apart”.
Symbols $mean you MUST perform this operation.
This example means “You must remove the wall plug”.

ii
R
RR
R
Warning:
•
Only connect the machine to the power source described on
the inside front cover of this manual.
•
Avoid multi-wiring.
•
Do not damage, break or make any modifications to the pow-
er cord. Do not place heavy objects on it, pull it hard or bend
it more than necessary. These actions could cause an elec-
tric shock or fire.
•
Do not plug or unplug the power cord with your hands wet.
Otherwise, an electric shock might occur.
•
Make sure the wall outlet is near the machine and freely ac-
cessible so that in event of an emergency it can be un-
plugged easily.
•
Do not remove any covers or screws other than those spec-
ified in this manual. Some parts of the machine are at a high
voltage and could give you an electric shock. When the ma-
chine needs to be checked, adjusted, or repaired, contact
your service representative.
•
Do not take apart or attempt any modifications to this ma-
chine. There is a risk of fire, electric shock, explosion or loss
of sight.
•
If the machine looks damaged or breaks down, smoke is
coming out, there is a strange smell or anything looks un-
usual, immediately turn off the main switch then unplug the
power cord from the wall. Do not continue using the ma-
chine in this condition. Contact your service representative.
•
If metal, liquid or foreign matter falls into the machine, turn
off the main switch and unplug the main power cord. Con-
tact your service representative. Do not keep using the ma-
chine with a fault or defect.
•
Do not put any metal objects or containers holding water
(e.g. vases, flowerpots, glasses) on the machine. If the con-
tents fall inside the machine, a fire or electric shock could
occur.

iii
R
RR
R
Caution:
•
Keep the machine away from humidity and dust. A fire or an elec-
tric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it top-
ples over, it could cause injury.
• After you move the machine, fix it with the caster fixture. Other-
wise, the machine might move or come down to cause a personal
injury.
• When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
• When the machine will not be used for a long time, unplug the
power cord.
• When you pull out the plug from the socket, grip the plug to avoid
damaging the cord and causing fire or electric shock.
• If you use the machine in a confined space, make sure there is a
continuous air turnover.
• Do not reuse stapled paper. Do not use aluminum foil, carbon-
containing paper or other conductive paper. Otherwise, a fire
might occur.
• This machine has been tested for safety using this supplier's
parts and consumables. We recommend you only use these
specified supplies.
• This equipment is only to be installed by a qualified service per-
sonnel.
• Deliver to collection point for waste products. Do not be disposed
of via domestic refuse collection.
• If ink comes into contact with your eyes, rinse immediately in run-
ning water. In the case of any abnormal symptoms, consult a
doctor.

iv
• Keep the ink or ink container out of reach of children.
• If ink is ingested, force vomiting by drinking a strong saline solu-
tion and consult a doctor immediately.
• Be careful not to cut yourself on any sharp edges when you reach
inside the machine to remove misfed sheets of paper or masters.
• While printing, do not touch the belt at the end of the paper deliv-
ery tray or the job separator. You might be injured.
• When your machine is equipped with the PC controller option:
• Do not place this equipment on an unstable or tilted surface. If
you do, it could fall.
• Do not place heavy objects on top of this equipment. They
might cause the equipment to become unstable and topple
over.
• When your machine is equipped with the PC controller option:
• If by any chance this equipment falls over or a breakage oc-
curs (e.g., the cover), turn off the main switch of this equip-
ment, unplug the power cable and contact your service
representative.If you continue to use the equipment in this
state it could result in fire or electric shock.

v
How To Read This Manual
Symbols
In this manual, the following symbols are used:
R
WARNING:
This symbol indicates a potentially hazardous situation that might result in
death or serious injury when you misuse the machine without following the in-
structions under this symbol. Be sure to read the instructions, all of which are de-
scribed in the Safety Information section.
R
CAUTION:
This symbol indicates a potentially hazardous situation that might result in mi-
nor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are described in the Safety
Information section.
* The statements above are notes for your safety.
Important
If this instruction is not followed, paper might be misfed, originals might be
damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates the prior knowledge or preparations required before op-
erating.
Note
This symbol indicates precautions for operation, or actions to take after misop-
eration.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates a reference.
[ ]
Keys that appear on the machine's panel display.
{ }
Keys built into the machine's operation panel.

vi
Making Prints
Before making prints using this ma-
chine, you have to make a master by
pressing the {
Start
}key. When you
press the {
Start
}key, the machine
scans the original image and makes a
master. This procedure describes
how to make basic prints.
ASet your originals.
When you set original on the
exposure glass (contact glass)
ASet one original face down.
When you set originals in the
optional document feeder
ASet the originals face up.
BPress the {
{{
{
Start
}
}}
}key.
CPress the {
{{
{
Proof
}
}}
}key.
Check the print image.
Reference
When you want to change the
image position, see ⇒P.25 “Ad-
justing Print Image Position”.
When you want to increase the
image density, press the {W}
key. See ⇒P.26 “Adjusting Print
Image Density”.
When you want to decrease the
image density, press the {V}
TPEH270E
TPEH281E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES060N
TPES560E