Ricoh B132 User manual

B132/B200
SERVICE MANUAL
002446MIU

B132/B200
SERVICE MANUAL

B132/B200
SERVICE MANUAL
002446MIU

It is the reader's responsibility when discussing the information contained
within this document to maintain a level of confidentiality that is in the best
interest of Ricoh Corporation and its member companies.
NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY
FASHION AND DISTRIBUTED WITHOUT THE PRIOR
PERMISSION OF RICOH CORPORATION.
A
ll product names, domain names or product illustrations, including
desktop images, used in this document are trademarks, registered
trademarks or the property of their respective companies.
They are used throughout this book in an informational or editorial fashion
only and for the benefit of such companies. No such use, or the use o
f
any trade name, or web site is intended to convey endorsement or othe
r
affiliation with Ricoh products.
2005 RICOH Corporation. All rights reserved.

The Service Manual contains information
regarding service techniques, procedures,
p
rocesses and spare parts of office equipmen
t
distributed by Ricoh Corporation. Users of this
manual should be either service trained o
r
certified by successfully completing a Ricoh
Technical Training Program.
Untrained and uncertified users utilizin
g
information contained in this service manual to
repair or modify Ricoh equipment risk persona
l
injury, damage to property or loss of warrant
y
p
rotection.
Ricoh Corporation
WARNING

LEGEND
PRODUCT CODE COMPANY
GESTETNER LANIER RICOH SAVIN
B132 DCs460 LC160 Aficio 3260C SDC6045
B200 CS555 LD155 Aficio Color 5560 SDC555
DOCUMENTATION HISTORY
REV. NO. DATE COMMENTS
* 07/2005 Original Printing

SM i B132/B200
B132/B200
TABLE OF CONTENTS
INSTALLATION
1. INSTALLATION............................................................................ 1-1
1.1 INSTALLATION REQUIREMENTS ...........................................................1-1
1.1.1 OPERATING ENVIRONMENT .........................................................1-1
1.1.2 MACHINE LEVEL .............................................................................1-2
1.1.3 MINIMUM SPACE REQUIREMENTS...............................................1-3
1.1.4 DIMENSIONS...................................................................................1-4
1.1.5 POWER REQUIREMENTS ..............................................................1-5
1.2 COPIER AND PERIPHERALS ..................................................................1-6
1.3 COPIER B132/B181/B200.........................................................................1-7
1.3.1 ACCESSORIES................................................................................1-7
1.3.2 INSTALLATION ................................................................................1-8
Tapes and packing material..................................................................1-8
Shipping Retainer Removal ................................................................1-12
Developer Cartridge Installation..........................................................1-15
Reassemble the PCU .........................................................................1-20
Reattach the Face Plate .....................................................................1-22
Remove the Retainers in the Drawer Unit...........................................1-23
Reinstall the Toner Hopper .................................................................1-26
STC (Soft Toner Cartridge) Installation...............................................1-27
Make the Machine Level .....................................................................1-28
Attach the PCU Stand Rack................................................................1-29
Attach Decals......................................................................................1-30
Initializing Developer and Toner .........................................................1-31
Load the Paper Trays .........................................................................1-33
Make a Test Color Print ......................................................................1-33
ACC (Automatic Color Calibration) Adjustment ..................................1-33
Counter Display Setting ......................................................................1-35
Print an SMC Report...........................................................................1-35
Connect the Upper and Lower Tray Heaters ......................................1-36
1.4 COPY TRAY (B756) ................................................................................1-37
1.4.1 ACCESSORIES..............................................................................1-37
1.4.2 INSTALLATION ..............................................................................1-38
1.5 A3/11" X 17" PAPER SIZE TRAY (B331)................................................1-41
1.5.1 ACCESSORIES..............................................................................1-41
1.5.2 INSTALLATION ..............................................................................1-42
1.6 KEY CARD BRACKET (B498), KEY COUNTER BRACKET (B452) .......1-47
1.6.1 KEY CARD BRACKET B498 ACCESSORIES ...............................1-47
1.6.2 KEY COUNTER BRACKET B452 ACCESSORIES........................1-48
1.6.3 INSTALLATION ..............................................................................1-49
Assemble the Key Counter Bracket ....................................................1-49

B132/B200 ii SM
Install the Key Card Bracket and Assembled Key Counter .................1-50
1.7 LCT (B473), LCT ADAPTER (B699)........................................................1-52
1.7.1 ACCESSORIES..............................................................................1-52
LCT (B473) .........................................................................................1-52
LCT Adapter (B699)............................................................................1-53
1.7.2 INSTALLATION ..............................................................................1-54
Removing Tape and Accessories .......................................................1-54
LCT Adapter (B699) Installation..........................................................1-55
LCT Installation...................................................................................1-56
1.8 81/2" X 14"/B4 PAPER SIZE TRAY (B474) .............................................1-59
1.8.1 ACCESSORIES..............................................................................1-59
1.8.2 INSTALLATION ..............................................................................1-60
LCT Connected to the Machine ..........................................................1-60
1.9 2000/3000 SHEET FINISHERS (B700/B701) .........................................1-63
1.9.1 ACCESSORIES..............................................................................1-63
1.9.2 INSTALLATION ..............................................................................1-64
Removing Tapes and Packing Materials.............................................1-64
Docking the Finisher to the Copier......................................................1-67
Attaching the Trays.............................................................................1-70
Leveling the Finisher...........................................................................1-71
De-curler Plate....................................................................................1-72
Selecting the Staple Supply Name .....................................................1-73
Enabling Booklet Binding (B700 Only) ................................................1-73
1.10 PUNCH UNIT (B702).............................................................................1-74
1.10.1 ACCESSORIES............................................................................1-74
1.10.2 INSTALLATION ............................................................................1-75
1.11 MAIL BOX (B762)..................................................................................1-78
1.11.1 ACCESSORIES............................................................................1-78
1.11.2 INSTALLATION ............................................................................1-79
1.12 3000-SHEET FINISHER (B706), FINISHER ADAPTER (B698)............1-82
1.12.1 ACCESSORIES............................................................................1-82
3000-Sheet Finisher B706 Accessories ..............................................1-82
Finisher Adapter Kit B698 Accessories...............................................1-83
1.12.2 INSTALLATION ............................................................................1-84
Shipping tape and retainers ................................................................1-84
Finisher Adapter Kit B698 Installation.................................................1-86
Finisher Installation .............................................................................1-90
Selecting the Staple Supply Name .....................................................1-93
1.13 PUNCH UNIT B531/A821......................................................................1-94
1.13.1 ACCESSORIES............................................................................1-94
1.13.2 INSTALLATION ............................................................................1-95
1.14 OUTPUT JOGGER UNIT (B703/B513) .................................................1-99
1.14.1 ACCESSORIES............................................................................1-99
1.14.2 INSTALLATION ..........................................................................1-100
1.15 COVER INTERPOSER TRAY (B704) .................................................1-102
1.15.1 ACCESSORIES..........................................................................1-102
1.15.2 INSTALLATION ..........................................................................1-103
Removing Tapes and Packing Materials...........................................1-103
Preparing the Finisher (B700/B701/B706) ........................................1-104

SM iii B132/B200
Attaching the Extensions for the B706..............................................1-105
Attaching the Extensions for the B700/B701.....................................1-108
Attaching the Interposer Tray (B700/B701/B706) .............................1-109
Attaching the Corner Plates for the B706..........................................1-110
Docking Finisher/Interposer with the Machine (B700/B701/B706)....1-112
1.16 MFP CONTROLLER OPTIONS ..........................................................1-114
1.16.1 OVERVIEW ................................................................................1-114
1.16.2 ACCESSORY CARDS................................................................1-115
1.16.3 APPLICATIONS PROVIDED ON SD CARDS ............................1-116
1.16.4 HANDLING DIMMS AND SD CARDS ........................................1-117
DIMMs ..............................................................................................1-117
SD cards ...........................................................................................1-117
1.16.5 MERGING APPLICATIONS ON ONE SD CARD .......................1-118
Overview...........................................................................................1-118
Merging Applications.........................................................................1-119
Undo Exec ........................................................................................1-120
Storing SD Application Cards on Site ...............................................1-121
1.16.6 PRINTER/SCANNER B737 AND INTERFACE UNIT.................1-122
Accessories ......................................................................................1-122
Installation.........................................................................................1-123
USB SP Settings...............................................................................1-125
1.16.7 IEEE 1284 INTERFACE BOARD B679 (CENTRONICS) ...........1-126
Accessories ......................................................................................1-126
1.16.8 IEEE 1394 INTERFACE BOARD B581 (FIREWIRE) .................1-127
Accessories ......................................................................................1-127
UP Mode Settings for IEEE 1394......................................................1-128
SP Mode Settings for IEEE 1394......................................................1-129
1.16.9 BLUETOOTH INTERFACE UNIT B736-11.................................1-130
Accessories ......................................................................................1-130
Installation Procedure .......................................................................1-131
1.16.10 IEEE 802.11B INTERFACE UNIT G813-04, -05.......................1-132
Accessories ......................................................................................1-132
Installation.........................................................................................1-133
UP Mode Settings for Wireless LAN .................................................1-134
SP Mode Settings for 802.11b Wireless LAN ...................................1-136
1.16.11 FILE FORMAT CONVERTER B609 .........................................1-137
Accessory Check ..............................................................................1-137
Installation.........................................................................................1-137
1.16.12 POSTSCRIPT3 B761 ...............................................................1-138
1.16.13 DOS UNIT TYPE C (B735).......................................................1-139
Accessory Check ..............................................................................1-139
Before You Begin… ..........................................................................1-139
Seal Check And Removal .................................................................1-140
Installation Procedure .......................................................................1-141
1.16.14 COPIER CONNECTION KIT B328...........................................1-143
1.16.15 EFI V G815 EXTERNAL CONTROLLER..................................1-145

B132/B200 iv SM
PREVENTIVE MAINTENANCE
2. PREVENTIVE MAINTENANCE.................................................... 2-1
2.1 OVERVIEW ...............................................................................................2-1
2.2 PM COUNTER ..........................................................................................2-2
2.2.1 DISPLAYING THE PM COUNTER...................................................2-2
2.2.2 PM PARTS SCREEN DETAILS .......................................................2-3
All PM Parts list: Main Menu .................................................................2-3
Number button submenu ......................................................................2-4
Parts list for PM yield indicator..............................................................2-5
2.3 PM TABLES ..............................................................................................2-6
2.3.1 MAIN MACHINE ...............................................................................2-6
Copier PM Parts ...................................................................................2-6
ARDF PM Parts ..................................................................................2-10
2.3.2 2000/3000-SHEET BOOKLET FINISHER B700/B701 ...................2-11
2.3.3 PUNCH B702 .................................................................................2-11
2.3.4 3000-SHEET FINISHER B706 .......................................................2-11
2.3.5 COVER INTERPOSER TRAY B704...............................................2-12
2.3.6 LCT B473 .......................................................................................2-12
2.4 LUBRICATION POINTS ..........................................................................2-13
2.4.1 COPIER..........................................................................................2-13
OPC, ITB Replacement ......................................................................2-13
Fusing Unit..........................................................................................2-14
REPLACEMENT AND ADJUSTMENT
3. REPLACEMENT AND ADJUSTMENT ........................................ 3-1
3.1 GENERAL CAUTIONS..............................................................................3-1
3.1.1 DRUM...............................................................................................3-1
3.1.2 PCU UNIT.........................................................................................3-1
3.1.3 TRANSFER BELT UNIT ...................................................................3-2
3.1.4 SCANNER UNIT...............................................................................3-2
3.1.5 LASER UNIT ....................................................................................3-2
3.1.6 DEVELOPMENT...............................................................................3-3
3.1.7 CLEANING .......................................................................................3-4
3.1.8 FUSING UNIT...................................................................................3-4
3.1.9 PAPER FEED...................................................................................3-4
3.1.10 USED TONER ................................................................................3-4
3.2 COMMON REMOVAL PROCEDURES .....................................................3-5
3.2.1 ARDF................................................................................................3-5
3.2.2 OPERATION PANEL, TOP COVERS ..............................................3-6
3.2.3 LEFT COVERS.................................................................................3-7
3.2.4 FRONT DOOR .................................................................................3-8
3.2.5 RIGHT COVERS ..............................................................................3-9
3.2.6 REAR COVERS..............................................................................3-10
3.2.7 TONER HOPPER, FACEPLATE, PCU...........................................3-11
Removing Hopper, Faceplate, PCU....................................................3-11

SM v B132/B200
Reinstalling PCU, Faceplate, Toner Hopper .......................................3-15
3.2.8 IMAGE TRANSFER UNIT ..............................................................3-18
3.2.9 DRAWER UNIT ..............................................................................3-20
3.2.10 DUPLEX UNIT..............................................................................3-22
3.2.11 OPENING AND LOCKING THE CONTROLLER BOX COVER....3-23
3.2.12 SD CARD STORAGE ...................................................................3-24
3.3 SCANNER UNIT......................................................................................3-25
3.3.1 EXPOSURE GLASS.......................................................................3-25
3.3.2 LENS BLOCK, PAPER SIZE SENSORS........................................3-26
3.3.3 EXPOSURE LAMP.........................................................................3-27
3.3.4 SCANNER MOTOR........................................................................3-28
3.3.5 SCANNER HP SENSOR ................................................................3-29
3.3.6 SCANNER INTERFACE BOARD (SIOB) .......................................3-30
3.3.7 SCANNER WIRE............................................................................3-31
Scanner Wire Removal .......................................................................3-31
Scanner Wire Reinstallation and Scanner Position Adjustment..........3-32
3.4 LASER UNIT ...........................................................................................3-34
3.4.1 CAUTION DECALS ........................................................................3-34
3.4.2 POLYGON MOTOR........................................................................3-35
3.4.3 LASER UNIT ..................................................................................3-36
Adjustments After Laser Unit Replacement ........................................3-39
3.4.4 LASER SYNCHRONIZATION DETECTOR....................................3-40
3.5 PCU.........................................................................................................3-41
3.5.1 DEVELOPER REPLACEMENT......................................................3-41
3.5.2 DEVELOPMENT GEARS ...............................................................3-49
3.5.3 CHARGE ROLLER UNIT................................................................3-50
3.5.4 DRUM AND CLEANING BLADE ....................................................3-51
Removing the OPC Drum ...................................................................3-51
Removing the Cleaning Blade ............................................................3-52
3.5.5 PCU CLEANING UNIT ...................................................................3-54
3.5.6 TD SENSOR...................................................................................3-56
3.5.7 AFTER REPLACING THE PCU COMPONENTS
AND DEVELOPER .........................................................................3-57
3.6 TONER SUPPLY.....................................................................................3-59
3.6.1 STC PORT CLEANING ..................................................................3-59
3.6.2 CONNECTOR BOARD (CNB)........................................................3-60
3.6.3 TONER PUMP................................................................................3-61
3.6.4 TONER END SENSOR ..................................................................3-62
3.6.5 TONER SUPPLY MOTOR..............................................................3-63
3.7 PAPER TRANSFER UNIT.......................................................................3-64
3.7.1 RELAY SENSOR............................................................................3-64
3.7.2 DOUBLE-FEED SENSORS, REGISTRATION SENSORS ............3-65
3.7.3 PAPER TRANSFER UNIT..............................................................3-66
3.7.4 PAPER TRANSFER ROLLER, DISCHARGE PLATE ....................3-68
3.7.5 LUBRICANT BAR...........................................................................3-69
3.7.6 CLEANING BLADE.........................................................................3-70
3.7.7 CLEANING BRUSH ROLLER ........................................................3-71
3.7.8 PAPER TRANSPORT BELT, PAPER SEPARATION POWER PACK
........................................................................................................3-72

B132/B200 vi SM
3.7.9 REGISTRATION MOTOR ..............................................................3-73
3.7.10 DOUBLE-FEED DETECTION LED...............................................3-74
3.8 IMAGE TRANSFER UNIT .......................................................................3-75
3.8.1 ITB, BELT CLEANING UNIT ..........................................................3-75
Disassembly and ITB Replacement ....................................................3-75
Reassembly of the Image ITB Unit and Belt Cleaning Unit.................3-77
Dusting the ITB with Lubricant Powder ...............................................3-79
3.8.2 ITB CLEANING BLADE, DUST COLLECTION UNIT .....................3-81
3.8.3 ITB CLEANING ROLLER, SCRAPER BLADE ...............................3-82
3.8.4 MUSIC AND ID SENSORS ............................................................3-83
3.8.5 IMAGE TRANSFER POWER PACK...............................................3-84
3.8.6 BELT POSITION SENSORS ..........................................................3-85
3.9 FUSING UNIT..........................................................................................3-86
3.9.1 FUSING BELT STRIPPERS...........................................................3-86
3.9.2 FUSING UNIT.................................................................................3-87
3.9.3 FUSING EXIT SENSOR, ACCORDION JAM SENSOR .................3-88
3.9.4 PRESSURE ROLLER THERMOSTATS, THERMISTOR ...............3-89
3.9.5 FUSING CLEANING UNIT .............................................................3-90
3.9.6 FUSING BELT THERMOSTATS ....................................................3-91
3.9.7 FUSING THERMISTORS, HEATING ROLLER
TEMPERATURE SENSOR .............................................................3-92
3.9.8 FUSING BELT OIL SUPPLY ROLLER, CLEANING ROLLERS .....3-93
3.9.9 PRESSURE ROLLER CLEANING FELT ROLLER ........................3-94
3.9.10 HOT ROLLER, HEATING ROLLER FUSING LAMPS ..................3-95
3.9.11 PRESSURE ROLLER FUSING LAMP .........................................3-97
3.9.12 HEATING ROLLER, FUSING BELT, HOT ROLLER ....................3-98
3.9.13 PRESSURE ROLLER.................................................................3-100
3.9.14 PRESSURE ROLLER SEPARATION PAWLS ...........................3-101
3.10 DUPLEX UNIT.....................................................................................3-102
3.10.1 DUPLEX INVERTER MOTOR....................................................3-102
3.10.2 DUPLEX TRANSPORT MOTOR................................................3-103
3.10.3 DUPLEX UNIT SENSORS .........................................................3-104
Duplex Entrance Sensor ...................................................................3-104
Transport Sensors 1, 2 .....................................................................3-105
Transport Sensor 3 ...........................................................................3-107
3.10.4 DUPLEX JOGGER MOTOR.......................................................3-108
3.10.5 DUPLEX JOGGER BELT ...........................................................3-109
3.11 TANDEM TRAY (TRAY 1) ...................................................................3-110
3.11.1 TANDEM TRAY..........................................................................3-110
3.11.2 REAR FENCE RETURN SENSOR REPLACEMENT.................3-112
3.11.3 REAR FENCE HP SENSOR REPLACEMENT...........................3-113
3.11.4 TANDEM RIGHT TRAY PAPER SENSOR REPLACEMENT.....3-114
3.11.5 BOTTOM PLATE LIFT WIRE REPLACEMENT..........................3-115
3.11.6 TANDEM TRAY PAPER SIZE CHANGE....................................3-117
3.12 PAPER FEED (TRAYS 2, 3)................................................................3-120
3.12.1 PICKUP, FEED, REVERSE ROLLERS ......................................3-120
3.12.2 PAPER FEED UNIT....................................................................3-121
3.12.3 SEPARATION ROLLER PRESSURE ADJUSTMENT................3-123
3.12.4 PAPER END, TRAY LIFT, PAPER FEED SENSORS ................3-124

SM vii B132/B200
3.12.5 VERTICAL TRANSPORT SENSOR ...........................................3-125
3.13 BYPASS UNIT.....................................................................................3-126
3.13.1 BYPASS PICKUP, FEED, REVERSE ROLLERS.......................3-126
3.13.2 BYPASS AUTO PAPER SIZE DETECTION SWITCHES...........3-127
3.13.3 BYPASS UNIT............................................................................3-128
3.13.4 BYPASS PAPER END SENSOR, FEED SENSOR....................3-129
3.13.5 BYPASS FEED CLUTCH ...........................................................3-130
3.14 BOARDS .............................................................................................3-131
3.14.1 CONTROLLER UNIT..................................................................3-131
3.14.2 CONTROLLER BOARD, 256 MB MEMORY, NVRAM ...............3-132
3.14.3 NVRAM REPLACEMENT...........................................................3-133
Upload NVRAM Data à SD Card ......................................................3-133
Replace NVRAM...............................................................................3-133
Restore NVRAM Data to the New NVRAM.......................................3-133
3.14.4 CONTROLLER BOX COVER, BICU, IOB ..................................3-134
3.14.5 RDS BOARD JUMPER...............................................................3-135
3.14.6 INTERFACE BOARD, MOTHER BOARD ..................................3-136
3.14.7 HVPS, PFC BOARD ...................................................................3-137
3.14.8 PSU ............................................................................................3-138
3.14.9 AC DRIVE BOARD .....................................................................3-139
3.14.10 TRANSFER MOTOR, DRIVE, DRIVE MOTOR BOARDS........3-140
3.15 HDD UNIT ...........................................................................................3-141
Disposal of HDD Units ......................................................................3-142
Reinstallation ....................................................................................3-142
3.16 MOTORS.............................................................................................3-143
3.16.1 PCU MOTOR, DRUM MOTOR...................................................3-143
3.16.2 PAPER TRANSFER MOTOR.....................................................3-145
3.16.3 IMAGE TRANSFER MOTOR .....................................................3-146
3.16.4 USED TONER MOTOR, TRANSPORT MOTOR........................3-147
3.16.5 BOTTOM PLATE LIFT MOTOR (TRAYS 2, 3) ...........................3-148
3.16.6 ITB DRIVE MOTOR....................................................................3-149
3.17 AIR FILTERS.......................................................................................3-150
3.17.1 TONER HOPPER FILTER..........................................................3-150
3.17.2 OZONE FILTER, AIR FILTERS..................................................3-151
3.17.3 SCANNER FILTER.....................................................................3-152
3.18 ARDF...................................................................................................3-153
3.18.1 ARDF COVERS..........................................................................3-153
3.18.2 ORIGINAL FEED UNIT...............................................................3-154
3.18.3 FEED BELT, PICKUP ROLLER .................................................3-155
3.18.4 BOTTOM PLATE POSITION SENSOR......................................3-156
3.18.5 INTERVAL, ORIGINAL WIDTH, SKEW
CORRECTION SEPARATION SENSORS ................................3-157
3.18.6 ORIGINAL LENGTH SENSORS.................................................3-158
3.18.7 COVER OPEN, ORIGINAL SET, BOTTOM PLATE,
PICKUP ROLLER HP, FEED-OUT SENSORS ..........................3-159
3.18.8 ARDF POSITION SENSOR, APS START SENSOR..................3-161
3.18.9 ORIGINAL REGISTRATION, EXIT SENSORS ..........................3-162
3.18.10 ARDF SEPARATION ROLLER ................................................3-164

B132/B200 viii SM
3.18.11 ARDF TRANSPORT BELT.......................................................3-165
Removing the ARDF Transport Belt Assembly .................................3-165
Removing the Belt.............................................................................3-166
Reinstalling the Belt ..........................................................................3-168
Reattaching the White Cover ............................................................3-169
3.18.12 ARDF CONTROL BOARD........................................................3-170
3.18.13 ARDF BOTTOM PLATE LIFT MOTOR.....................................3-171
3.18.14 ARDF FEED MOTOR, ARDF TRANSPORT MOTOR ..............3-172
3.18.15 ARDF PICKUP ROLLER LIFT MOTOR....................................3-173
3.19 IMAGE ADJUSTMENTS .....................................................................3-174
3.19.1 SCANNING.................................................................................3-174
Scanner sub-scan magnification.......................................................3-174
Scanner leading edge and side-to-side registration..........................3-174
Main scan dot position correction .....................................................3-175
3.19.2 ARDF..........................................................................................3-176
ARDF side-to-side and leading edge registration .............................3-176
3.19.3 REGISTRATION.........................................................................3-177
Image Area .......................................................................................3-177
Leading Edge....................................................................................3-177
Side to Side ......................................................................................3-177
Adjustment Standards.......................................................................3-177
Paper Registration Standard.............................................................3-177
Adjustment Procedure ......................................................................3-178
3.19.4 COLOR REGISTRATION ...........................................................3-179
Forced MUSIC Adjustment ...............................................................3-179
Adjustment of Line Speed for Thick Paper........................................3-179
Color Registration Test and Error Adjustment ..................................3-179
3.19.5 SKEW ADJUSTMENT AFTER LASER UNIT REPLACEMENT .3-180
3.19.6 PRINTER GAMMA CORRECTION ............................................3-182
Copy Mode .......................................................................................3-182
Printer Mode .....................................................................................3-186
Adjustment Reference For Gamma Correction.................................3-187
3.20 TOUCH SCREEN CALIBRATION .......................................................3-188
TROUBLESHOOTING
4. TROUBLESHOOTING ................................................................. 4-1
4.1 PROGRAM DOWNLOAD..........................................................................4-1
4.1.1 OVERVIEW ......................................................................................4-1
4.1.2 RECOVERY METHODS...................................................................4-1
4.1.3 DOWNLOAD ERROR CODES.........................................................4-2
4.1.4 IMPORTANT SP CODES .................................................................4-5
4.2 SPECIAL PROCEDURES .........................................................................4-6
4.2.1 SP2181 030 (ALIGNMENT RESULT) ERRORS ..............................4-6
4.2.2 COLOR REGISTRATION ERROR ADJUSTMENT ..........................4-9
Color Registration Error Correction.......................................................4-9
Color Skew Error Correction ...............................................................4-11
Overall Check .....................................................................................4-12