Riedel Punqtum Q110 User manual

QUICK START GUIDE
Q110 - Beltpack
Q-Series Network Based Intercom System
Welcome to punQtum’s digital intercom family!
This document will give an overview of the Q110 Beltpack and help setting up your system.
What’s in the Package
• Q110 Beltpack
• Belt clip
• This quick start guide
Software Update
To ensure the best experience, please keep rmware and software tools updated.
Please visit www.punQtum.com/downloads
Safety Instructions & Warnings
• Read, keep and follow these instructions.
• Do not use this product near water.
• Do not expose the product to dripping or splashing liquid.
• Unplug the unit during lightning storms.
• Clean only with dry cloth.
• Do not open the unit (no user-serviceable parts inside).
Modications executed by unqualied personnel can void the warranty

Getting Started
1. Power your beltpack(s)
2. Connect your headset
3. Push the TALK button and enjoy
Operating elements
One or more Q110
powered by a
PoE switch:
PoE Switch
One or more Q110
powered by a Q210 P
Speaker Station:
punQtum Q210 P
One Q110 powered
by a PoE injector
switch
The Q110 Beltpack connects to a PoE-compliant (IEEE 802.3af, 3at or 3bt) punQtum intercom
system and supports monaural headsets with a dynamic or electret microphone. Regular PoE
switches or PoE injectors can be used as well as a punQtum Q210 P Speaker Station or another
Q110 Beltpack.
Q110 Beltpacks can conveniently be daisy-chained as shown above. Note that the number of daisy-
chained Q110 units is limited by the available PoE power budget, Ethernet cable length and quality.
Star topologies using Ethernet switches are preferred to daisy-chained networks.
1. Color TFT display
2. TALK buttons
3. CALL buttons
4. MENU / OK button
5. BACK button
6. REPLAY / SKIP BACK button
7. REPLAY / SKIP FORWARD button
8. Finger position marker
9. VOLUME button
10. Programmable button
11. Rotary encoders

Connectors
Headset connector pin assignment
Disposal
12. Headset connector
13. Network & PoE input
14. Network & PoE output (passthrough)
1. Microphone [-] GND
2. Microphone [+] (bias for electret type)
3. Headphone [-]
4. Headphone [+]
This symbol, found on your product or on its packaging, indicates that the product was put on the market after
August 13, 2005 and must not be disposed of with other waste. Instead, it should be handed over to an appropriate collection
point for the recycling of electrical and electronic equipment.
The separate collection and recycling of waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment. For more
detailed information about the recycling of this product please contact your local authority.
© 2021 punQtum by Riedel All rights reserved.
All trademarks are the property of their respective owners. punQtum accepts no liability
for any loss caused by relying on descriptions, pictures or statementscontained herein.
Technical specications and appearance are subject to change without notice.
PNQ-110(D)
Do you need help or more information?
Visit www.punQtum.com/support to access user manuals, the FAQ section and the contact form.