Riello Rs 310/e o2 blu Quick start guide

Installation, use and maintenance instructions

20173117 (4) - 09/2020

Forced draught gas burners

Modulanting operation

CODE MODEL TYPE

20166002 RS 310/E O2BLU 1138T1

20174926 RS 410/E O2BLU 1135T1

20179072 RS 410/E O2BLU 1135T1

20158157 RS 410/E O2BLU 1135T1

20174930 RS 510/E O2BLU 1136T1

20156791 RS 510/E O2BLU 1136T1

20174931 RS 610/E O2BLU 1137T1

Translation of the original instructions

1 20173117

Contents

1 Declarations................................................................................................................................................................................ 3

2 Information and general warnings............................................................................................................................................ 4

2.1 Information about the instruction manual .................................................................................................................... 4

2.1.1 Introduction.................................................................................................................................................................. 4

2.1.2 General dangers.......................................................................................................................................................... 4

2.1.3 Other symbols ............................................................................................................................................................. 4

2.1.4 Delivery of the system and the instruction manual...................................................................................................... 5

2.2 Guarantee and responsibility....................................................................................................................................... 5

3 Safety and prevention................................................................................................................................................................ 6

3.1 Introduction.................................................................................................................................................................. 6

3.2 Personnel training ....................................................................................................................................................... 6

4 Technical description of the burner ......................................................................................................................................... 7

4.1 Burner designation ...................................................................................................................................................... 7

4.2 Models available.......................................................................................................................................................... 7

4.3 Burner categories - Countries of destination ............................................................................................................... 8

4.4 Technical data ............................................................................................................................................................. 8

4.5 Electrical data.............................................................................................................................................................. 8

4.6 Maximum dimensions................................................................................................................................................ 10

4.7 Firing rates ................................................................................................................................................................ 11

4.8 Test boiler.................................................................................................................................................................. 12

4.9 Burner equipment...................................................................................................................................................... 12

4.10 Burner description ..................................................................................................................................................... 13

4.11 Electrical panel description........................................................................................................................................ 14

4.12 Control box for the air/fuel ratio (LMV52...) ............................................................................................................... 15

4.13 Actuator ..................................................................................................................................................................... 17

4.14 PLL52... module (optional) ........................................................................................................................................ 18

4.14.1 Terminal ratings, cable lengths and cross-sectional areas ....................................................................................... 18

4.15 Oxygen sensor QGO20 ... (optional)........................................................................................................................ 19

4.15.1 Technical data QGO20.............................................................................................................................................. 20

4.16 Calibration of the thermal relay ................................................................................................................................. 21

5 Installation ................................................................................................................................................................................ 22

5.1 Notes on safety for the installation ............................................................................................................................ 22

5.2 Handling .................................................................................................................................................................... 22

5.3 Preliminary checks .................................................................................................................................................... 22

5.4 Operating position ..................................................................................................................................................... 23

5.5 Preparing the boiler ................................................................................................................................................... 23

5.5.1 Boring the boiler plate ............................................................................................................................................... 23

5.5.2 Blast tube length........................................................................................................................................................ 23

5.6 Securing the burner to the boiler............................................................................................................................... 23

5.7 Access to head internal part...................................................................................................................................... 24

5.8 Probe-electrode position ........................................................................................................................................... 25

5.9 Gas butterfly valve..................................................................................................................................................... 25

5.10 Combustion head adjustment.................................................................................................................................... 26

5.11 Gas pressures ........................................................................................................................................................... 28

5.11.1 Gas feeding line ........................................................................................................................................................ 28

5.11.2 Gas train.................................................................................................................................................................... 29

5.11.3 Gas train installation.................................................................................................................................................. 29

5.11.4 Gas pressure............................................................................................................................................................. 30

5.12 Electrical wiring ......................................................................................................................................................... 31

5.12.1 Supply cables and external connections passage .................................................................................................... 32

6 Start-up, calibration and operation of the burner ................................................................................................................. 33

20173117 2

Contents

6.1 Notes on safety for the first start-up...........................................................................................................................33

6.2 Adjustments prior to ignition.......................................................................................................................................33

6.3 Burner start-up ...........................................................................................................................................................34

6.4 Air / fuel adjustment ...................................................................................................................................................35

6.4.1 Air adjustment for maximum output ...........................................................................................................................35

6.4.2 Air/fuel adjustment and output modulation system ....................................................................................................35

6.4.3 Burner adjustment......................................................................................................................................................35

6.4.4 Output upon ignition...................................................................................................................................................35

6.4.5 Maximum output ........................................................................................................................................................35

6.4.6 Minimum output .........................................................................................................................................................35

6.5 Final adjustment of the pressure switches.................................................................................................................36

6.5.1 Air pressure switch.....................................................................................................................................................36

6.5.2 Maximum gas pressure switch...................................................................................................................................36

6.5.3 Minimum gas pressure switch....................................................................................................................................37

6.5.4 PVP pressure switch kit .............................................................................................................................................37

6.6 Final checks (with burner operating)..........................................................................................................................37

6.7 Motor lockout .............................................................................................................................................................37

6.8 Description of O2 trim control (optional) ...................................................................................................................38

6.8.1 Operating principle of O2 trim control ........................................................................................................................38

7 Maintenance ..............................................................................................................................................................................39

7.1 Notes on safety for the maintenance .........................................................................................................................39

7.2 Maintenance programme ...........................................................................................................................................39

7.2.1 Maintenance frequency..............................................................................................................................................39

7.2.2 Safety test - with gas feeding closed .........................................................................................................................39

7.2.3 Checking and cleaning...............................................................................................................................................39

7.2.4 Safety components ....................................................................................................................................................40

7.2.5 Measuring the ionisation current................................................................................................................................40

7.2.6 Checking the air and gas pressure on the combustion head .....................................................................................40

7.3 Opening the burner ....................................................................................................................................................41

7.4 Closing the burner......................................................................................................................................................41

8 Faults - Possible causes - Solutions.......................................................................................................................................42

A Appendix - Accessories ...........................................................................................................................................................43

B Appendix - Electrical panel layout...........................................................................................................................................45

3 20173117

Declarations

1 Declarations

Declaration of conformity in accordance with ISO / IEC 17050-1

Manufacturer: RIELLO S.p.A.

Address: Via Pilade Riello, 7

37045 Legnago (VR)

Product: Forced draught gas burners

Model and type: RS 310/E O2 BLU

RS 410/E O2BLU

RS 510/E O2BLU

RS 610/E O2BLU

1138T1

1135T1

1136T1

1137T1

These products are in compliance with the following Technical Standards:

EN 676

EN 12100

and according to the European Directives:

GAR 2016/426/EU Gas Devices Regulation

MD 2006/42/CE Machine Directive

LVD 2014/35/EU Low Voltage Directive

EMC 2014/30/EU Electromagnetic Compatibility

Such products are marked as follows:

CE-0085CP0166 (Classe 3 EN 676)

The quality is guaranteed by a quality and management system certified in accordance with ISO 9001:2015.

Manufacturer's Declaration

RIELLO S.p.A. declares that the following products comply with the NOx emission limits specified by German standard “1. BIm-

SchV revision 26.01.2010”.

Product Model Type Output

Forced draught gas burners RS 310/E O2BLU 1138T1 400 - 3630 kW

RS 410/E O2 BLU 1135T1 500 - 4450 kW

RS 510/E O2 BLU 1136T1 680 - 5250 kW

RS 610/E O2 BLU 1137T1 1000 - 6250 kW

Legnago, 01.12.2015 Executive General Manager

RIELLO S.p.A. - Burner Department

Research & Development Director

RIELLO S.p.A. - Burner Department

Mr. U. Ferretti Mr. F. Comencini

0085

20173117 4

Information and general warnings

2.1 Information about the instruction manual

2.1.1 Introduction

The instruction manual supplied with the burner:

is an integral and essential part of the product and must not

be separated from it; it must therefore be kept carefully for

any necessary consultation and must accompany the burner

even if it is transferred to another owner or user, or to

another system. If the manual is lost or damaged, another

copy must be requested from the Technical Assistance Ser-

vice of the area;

is designed for use by qualified personnel;

offers important indications and instructions relating to the

installation safety, start-up, use and maintenance of the

burner.

Symbols used in the manual

In some parts of the manual you will see triangular DANGER

signs. Pay great attention to these, as they indicate a situation of

potential danger.

2.1.2 General dangers

The dangers can be of 3 levels, as indicated below.

2.1.3 Other symbols

Abbreviations used

Ch. Chapter

Fig. Figure

Page Page

Sec. Section

Tab. Table

2 Information and general warnings

DANGER

Maximum danger level!

This symbol indicates operations which, if not car-

ried out correctly, cause serious injury, death or

long-term health risks.

WARNING

This symbol indicates operations which, if not car-

ried out correctly, may cause serious injury, death

or long-term health risks.

CAUTION

This symbol indicates operations which, if not car-

ried out correctly, may cause damage to the ma-

chine and/or injury to people.

DANGER

DANGER: LIVE COMPONENTS

This symbol indicates operations which, if not car-

ried out correctly, lead to electric shocks with le-

thal consequences.

DANGER: FLAMMABLE MATERIAL

This symbol indicates the presence of flammable

materials.

DANGER: BURNING

This symbol indicates the risks of burns due to

high temperatures.

DANGER: CRUSHING OF LIMBS

This symbol indicates the presence of moving

parts: danger of crushing of limbs.

WARNING: MOVING PARTS

This symbol indicates that you must keep limbs

away from moving mechanical parts; danger of

crushing.

DANGER: EXPLOSION

This symbol signals places where an explosive at-

mosphere may be present. An explosive atmos-

phere is defined as a mixture - under atmospheric

conditions - of air and flammable substances in

the form of gases, vapours, mist or dust in which,

after ignition has occurred, combustion spreads to

the entire unburned mixture.

PERSONAL PROTECTION EQUIPMENT

These symbols indicate the equipment that must

be worn and kept by the operator for protection

against threats against safety and/or health while

at work.

OBLIGATION TO ASSEMBLE THE COVER

AND ALL THE SAFETY AND PROTECTION DE-

VICES

This symbol signals the obligation to reassemble

the cover and all the safety and protection devices

of the burner after any maintenance, cleaning or

checking operations.

ENVIRONMENTAL PROTECTION

This symbol gives indications for the use of the

machine with respect for the environment.

IMPORTANT INFORMATION

This symbol indicates important information that

you must bear in mind.

This symbol indicates a list.

5 20173117

Information and general warnings

2.1.4 Delivery of the system and the instruction

manual

When the system is delivered, it is important that:

the instruction manual is delivered to the user by the system

manufacturer, with the recommendation to keep it in the

room where the heat generator is to be installed.

The instruction manual shows:

– the serial number of the burner;

– the address and telephone number of the nearest Assis-

tance Centre

The system supplier must carefully inform the user about:

– the use of the system;

– any further tests that may be required before activating the

system;

– maintenance, and the need to have the system checked at

least once a year by a representative of the manufacturer

or another specialised technician.

To ensure a periodic check, the manufacturer recom-

mends the drawing up of a Maintenance Contract.

2.2 Guarantee and responsibility

The manufacturer guarantees its new products from the date of

installation, in accordance with the regulations in force and/or the

sales contract. At the moment of the first start-up, check that the

burner is integral and complete.

In particular, the rights to the guarantee and the responsibility will

no longer be valid, in the event of damage to things or injury to

people, if such damage/injury was due to any of the following

causes:

incorrect installation, start-up, use and maintenance of the

burner;

improper, incorrect or unreasonable use of the burner;

intervention of unqualified personnel;

carrying out of unauthorised modifications on the equipment;

use of the burner with safety devices that are faulty, incor-

rectly applied and/or not working;

installation of untested supplementary components on the

burner;

powering of the burner with unsuitable fuels;

faults in the fuel supply system;

continuation of use of the burner when a fault has occurred;

repairs and/or overhauls incorrectly carried out;

modification of the combustion chamber with inserts that

prevent the regular development of the structurally estab-

lished flame;

insufficient and inappropriate surveillance and care of those

burner components most likely to be subject to wear and

tear;

use of non-original components, including spare parts, kits,

accessories and optional;

force majeure.

The manufacturer furthermore declines any and every re-

sponsibility for the failure to observe the contents of this

manual.

.........................................................................................

WARNING

Failure to observe the information given in this

manual, operating negligence, incorrect installa-

tion and carrying out of non authorised modifica-

tions will result in the annulment by the

manufacturer of the guarantee that it supplies with

the burner.

20173117 6

Safety and prevention

3.1 Introduction

The burners have been designed and built in compliance with

current regulations and directives, applying the known technical

rules of safety and envisaging all the potential danger situations.

It is necessary, however, to bear in mind that the imprudent and

clumsy use of the equipment may lead to situations of death risk

for the user or third parties, as well as the damaging of the burner

or other items. Inattention, thoughtlessness and excessive confi-

dence often cause accidents; the same applies to tiredness and

sleepiness.

It is a good idea to remember the following:

The burner must only be used as expressly described. Any

other use should be considered improper and therefore dan-

gerous.

In particular:

it can be applied to boilers operating with water, steam, diather-

mic oil, and to other uses expressly foreseen by the manufactur-

er;

the type and pressure of the fuel, the voltage and frequency of the

electrical power supply, the minimum and maximum deliveries for

which the burner has been regulated, the pressurisation of the

combustion chamber, the dimensions of the combustion cham-

ber and the room temperature must all be within the values indi-

cated in the instruction manual.

Modification of the burner to alter its performance and desti-

nations is not allowed.

The burner must be used in exemplary technical safety con-

ditions. Any disturbances that could compromise safety must

be quickly eliminated.

Opening or tampering with the burner components is not

allowed, apart from the parts requiring maintenance.

Only those parts envisaged by the manufacturer can be

replaced.

3.2 Personnel training

The user is the person, body or company that has acquired the

machine and intends to use it for the specific purpose. He is re-

sponsible for the machine and for the training of the people work-

ing around it.

The user:

undertakes to entrust the machine exclusively to suitably

trained and qualified personnel;

undertakes to inform his personnel in a suitable way about

the application and observance of the safety instructions.

With that aim, he undertakes to ensure that everyone knows

the use and safety instructions for his own duties;

Personnel must observe all the danger and caution indica-

tions shown on the machine.

Personnel must not carry out, on their own initiative, opera-

tions or interventions that are not within their province.

Personnel must inform their superiors of every problem or

dangerous situation that may arise.

The assembly of parts of other makes, or any modifications,

can alter the characteristics of the machine and hence com-

promise operating safety. The manufacturer therefore

declines any and every responsibility for any damage that

may be caused by the use of non-original parts.

In addition:

3 Safety and prevention

WARNING

The manufacturer guarantees safety and proper

functioning only if all burner components are intact

and positioned correctly.

must take all the measures necessary to pre-

vent unauthorised people gaining access to

the machine;

the user must inform the manufacturer if

faults or malfunctioning of the accident pre-

vention systems are noticed, along with any

presumed danger situation;

personnel must always use the personal pro-

tective equipment envisaged by legislation

and follow the indications given in this man-

ual.

7 20173117

Technical description of the burner

4.1 Burner designation

4.2 Models available

Tab. A

4 Technical description of the burner

Designation Voltage Start-up Code

RS 310/E O2BLU TC 3/400/50 Direct 20166002

RS 410/E O2BLU TC 3/400/50 Direct 20174926

RS 410/E O2BLU TC 3/400/50 Star/Triangle 20179072

RS 410/E O2BLU TL 3/400/50 Star/Triangle 20158157

RS 510/E O2BLU TC 3/400/50 Star/Triangle 20174930

RS 510/E O2BLU TL 3/400/50 Star/Triangle 20156791

RS 610/E O2BLU TC 3/400/50 Star/Triangle 20174931

Range: R

Size

Fuel: Natural gas

Gas oil

Gas oil / Methane

Flame control system:

FS1

FS2

Standard (1 stop every 24 h)

Continuous working (1 stop every 72 h)

Electrical supply of the system:

3/400/50

3/230/50

Voltage of auxiliaries:

230/50/60

110/50/60

R S 310 TC FS1 3/400/50 230/50/60

BASIC DESIGNATION

EXTENDED DESIGNATION

BLU

3N / 400V / 50Hz

3 / 230V / 50Hz

230V / 50-60Hz

110V / 50-60Hz

Heavy oil

Head : TC Standard head

TL Long head

Emission: C01 - ...

C02 - MZ

C03 - BLU

C03 - MX

Class 1 EN676

Class 2 EN676

Class 3 EN676

Adjustment : E Electronic cam

EV Electronic cam and variable speed (with Inverter)

M Mechanical cam

P Proportional air/gas valve

E O2Electronic cam and suitable for Oxygen Control (O2)

EV O2Electronic cam and variable speed (with Inverter) and suitable for Oxygen Control O2

E O2

20173117 8

Technical description of the burner

4.3 Burner categories - Countries of destination

Tab. B

4.4 Technical data

Tab. C

(1) Reference conditions: Room temperature 20°C - Gas temperature 15°C - Barometric pressure 1013 mbar - Altitude 0 m a.s.l.

(2) Pressure at the test point of the pressure switch 5)(Fig. 4) with zero pressure in the combustion chamber and at maximum burner output.

(3) Sound pressure measured in manufacturer's combustion laboratory, with burner operating on test boiler and at maximum rated output. The sound

power is measured with the “Free Field” method, as per EN 15036, and according to an “Accuracy: Category 3” measuring accuracy, as set out

in EN ISO 3746.

4.5 Electrical data

Tab. D

Gas category Destination country

I2H AT-BG-CH-CZ-DK-EE-ES-FI-GB-GR-HU-HR-IE-IS-IT-LT-LV-NO-PT-

RO-SE-SI-SK-TR

I2ELL DE

I2EK NL

I2Er FR

I2E(R) BE

I2E LU - PL

Model RS 310/E O2BLU RS 410/E O2BLU RS 510/E O2BLU RS 610/E O2BLU

Power(1)

Delivery (1)

min - max kW 400/1200 ÷ 3630 500/1500 ÷ 4450 680/1800 ÷ 5250 1000/2200 ÷ 6250

Fuels Natural gas: G20 (methane gas) - G21 - G22 - G23 - G25

Gas pressure at max. output (2)

Gas: G20/G25 mbar 50.1/74.7 53.1/79.2 59,7/89,1 77,6/115,8

Operation FS1: Intermittent (min. 1 stop in 24 hours)

FS2: Continuous (min. 1 stop in 72 hours)

Standard applications Boilers: water, steam, diathermic oil

Ambient temperature °C 0 - 50

Combustion air temperature °C max 60

Burner weight (complete with its

packaging) kg 250 250 250 280

Noise levels (3) Sound pressure

Sound power dB(A) 78

82.5

93.5

DIRECT START UP

Model RS 310/E O2BLU RS 410/E O2BLU

Main electrical supply 3N ~ 400V +/-10% 50 Hz

Fan motor IE2 rpm

2900

220-240 / 380-415

7,5

23.2/13.4

2930

230/400

9,2

28.6/16.5

Ignition transformer V1 - V2

I1 - I2

230 V - 1 x 8 kV

1 A - 20 mA

Absorbed electrical power kW max 9.1 10.8

Protection level IP 54

This manual suits for next models

Table of contents

Other Riello Indoor Fireplace manuals

Riello

Riello 40 G20 Quick start guide

Riello

Riello LPG kit Quick start guide

Riello

Riello RX 700 S/PV Quick start guide

Riello

Riello RS 150/M Quick start guide

Riello

Riello RS 68/E LN Quick start guide

Riello

Riello RX 150 S/PV Quick start guide

Riello

Riello RS 300/M BLU Quick start guide

Riello

Riello RS 28 Quick start guide

Riello

Riello RLS 28 TC Quick start guide

Riello

Riello RS 160/M LN Quick start guide

Riello

Riello RLS 500/M MX Quick start guide

Riello

Riello RS 50/E MZ Quick start guide

Riello

Riello GAS 3/2 Manual

Riello

Riello RS 68/M BLU Quick start guide

Riello

Riello RS 190 Quick start guide

Riello

Riello RX 90 S/PV Quick start guide

Riello

Riello RS 310/M MZ Quick start guide

Riello

Riello RS/M Series Quick start guide

Riello

Riello RS 1000/M C01 Quick start guide

Riello

Riello BS1D Quick start guide

Riello

Riello GAS 6 P/M Quick start guide

Riello

Riello RLS 100 Quick start guide

Riello

Riello RS 55/M BLU Quick start guide

Riello

Riello RS 250/M MZ Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Desa

Desa CCFPDFT Owner's operating & installation manual

Miles Industries

Miles Industries Vogue 1300IRN Installation & operating instructions

Riello RS 310/E O2 BLU Quick start guide

Popular Indoor Fireplace manuals by other brands