Rigol DS4000 Series User manual

RIGOL
Declassification Guide
Digital Oscilloscope
May 2012
RIGOL Technologies, Inc.

RIGOL
Declassification Guide for Digital Oscilloscope
1
DS2000 Series
DS2000 series digital oscilloscope consists of DS2202, DS2102 and DS2072.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
32MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
16MB
No Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving,
ref/setup
/pf
Main board
in CPU area Security clear or save files to C:
FRAM
2kB Yes Yes Settings Program Main board in CPU area Default
DDR2
32MB*16B
*3
Yes No Acquire
memory Acquire system Main board in acquire
area
Cycle power
SRAM
512kB*36B
*2
Yes No Display
memory Display system Main board in display
area
Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
2
Position of Instrument Memory on Main Board
Security Clear Procedure
To clear the memories, press Storage Disk.Manage Security Clear OK and the
system will be restored to the default settings.

RIGOL
Declassification Guide for Digital Oscilloscope
3
DS4000 Series
DS4000 series digital oscilloscope consists of DS4054, DS4052, DS4034, DS4032, DS4024, DS4022,
DS4014 and DS4012.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
32MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
16MB
Yes Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving
ref/setup/
pf
Main board
in CPU area Security clear or Save files to
C:
FRAM
2kB Yes Yes Settings Program Main board in CPU area Default
DDR2
32MB*16B
*17
Yes No Acquire
memory Acquire system Main board in acquire
area
Cycle power
SRAM
512kB*36
B*8
Yes No Display
memory Display system Main board in display
area
Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
4
Position of Instrument Memory on Main Board
Security Clear Procedure
To clear the memories, press Storage Disk.Manage Security Clear OK and the
system will be restored to the default settings.

RIGOL
Declassification Guide for Digital Oscilloscope
5
DS6000 Series
DS6000 series digital oscilloscope consists of DS6104, DS6102, DS6064 and DS6062.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
32MB Yes No Program Boot Main board in CPU area Cycle power
NAND
FLASH
1GB
Yes Yes Internal
savings,
setup/wfm/ref
/pf/trc
Internal
saving Main board in CPU area Save files to internal C:
NOR
FLASH
16MB
No Yes Firmware, Bin Firmware
update Main board in CPU area No user data
FRAM
2kB Yes Yes Setting Program Main board in CPU area Default
DDR2
32MB*16
B*17
Yes No Acquire
memory Acquire system Main board in acquire
area
Cycle power
QDR2
22MB*18
B*8
Yes No Display
memory Display System Main board in draw area Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
6
Position of Instrument Memory on Main Board
Security Clear Procedure
To clear the memories, press SAVE Disk.Manage Security Clear OK and the
system will be restored to the default settings.

RIGOL
Declassification Guide for Digital Oscilloscope
7
DS1000B Series
DS1000B series digital oscilloscope consists of DS1204B, DS1104B and DS1074B.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
16MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
8MB
No Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving,
ref/setup
/pf
/record
/wfm
Main board
in CPU area Save files to inter
FRAM
1kB Yes Yes Settings Program Main board in CPU area Default
SDRAM
16MB Yes No Drawing Draw Main board in display
area
Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
8
Position of Instrument Memory on Main Board

RIGOL
Declassification Guide for Digital Oscilloscope
9
DS1000CA Series
DS1000CA digital oscilloscope consists of DS1302CA, DS1202CA, DS1102CA and DS 1072CA.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
16MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
8MB
No Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving,
ref/setup/
pf/record
/wfm
Main board
in CPU area Save files to inter
FRAM
1kB Yes Yes Settings Program Main board in CPU area Default
SDRAM
16MB Yes No Drawing Draw Main board in display
area
Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
10
Position of Instrument Memory on Main Board

RIGOL
Declassification Guide for Digital Oscilloscope
11
DS1000E Series
DS1000E series digital oscilloscope consists of DS1102E and DS1052E.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and
remarks
Sanitization
procedure
SDRAM
16MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
8MB
No Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving,
ref/setup/
pf/record
/wfm
Main board
in CPU area Save files to inter
FRAM
1kB Yes Yes Settings Program Main board in CPU area Default
SRAM
512kB Yes No wfm points Acquire Main board in acquire
area
Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
12
Position of Instrument Memory on Main Board

RIGOL
Declassification Guide for Digital Oscilloscope
13
DS1000D Series
DS1000D series digital oscilloscope consists of DS1102D and DS1052D.
Instrument Memory
This section contains information on the types of memory available in your instrument. It explains the
size of memory, how it is used, its location, volatility and the clearing procedure.
Instrument memory:
Memory
type and
size
Writable
during
normal
operation
Data
retained
when
powered
off
Purpose/
contents Data input
method
Location in
instrument
and remarks
Sanitization
procedure
SDRAM
16MB Yes No Program Boot Main board in CPU area Cycle power
NOR
FLASH
8MB
No Yes Firmware,
Bin,
Internal
saving
Firmware
update,
Internal
saving,
ref/setup
/pf/
record
/wfm
Main board in
CPU area Save files to inter
FRAM
1kB Yes Yes Settings Program Main board in CPU area Default
SRAM
512kB Yes No wfm points Acquire Main board in acquire area Cycle power
SRAM
512kB Yes No LA points Acquire Main board in acquire area Cycle power

RIGOL
Declassification Guide for Digital Oscilloscope
14
Position of Instrument Memory on Main Board