Rigol MSO1000Z series User manual

RIGOL
User’s Guide
MSO1000Z/DS1000Z Series
Digital Oscilloscope
Jul. 2014
RIGOL Technologies, Inc.

RIGOL
MSO1000Z/DS1000Z User’s Guide I
Guaranty and Declaration
Copyright
© 2014 RIGOL Technologies, Inc. All Rights Reserved.
Trademark Information
RIGOL is a registered trademark of RIGOL Technologies, Inc.
Publication Number
UGA19104-1110
Notices
RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
RIGOL reserves the right to modify or change parts of or all the specifications
and pricing policies at company’s sole decision.
Information in this publication replaces all previously corresponding material.
Information in this publication is subject to change without notice.
RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use or performance of this manual as well as any
information contained.
Any part of this document is forbidden to be copied, photocopied or rearranged
without prior written approval of RIGOL.
Product Certification
RIGOL guarantees this product conforms to the national and industrial standards in
China as well as the ISO9001:2008 standard and the ISO14001:2004 standard.
Other international standard conformance certification is in progress.
Contact Us
If you have any problem or requirement when using our products or this manual,
please contact RIGOL.
E-mail: [e-mail]
Website: www.rigol.com

RIGOL
II MSO1000Z/DS1000Z User’s Guide
Safety Requirement
General Safety Summary
Please review the following safety precautions carefully before putting the
instrument into operation so as to avoid any personal injury or damage to the
instrument and any product connected to it. To prevent potential hazards, please use
the instrument only specified by this manual.
Use Proper Power Cord.
Only the power cord designed for the instrument and authorized for use within the
local country could be used.
Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the power cord. To
avoid electric shock, it is essential to connect the earth terminal of the power cord to
the Protective Earth terminal before connecting any inputs or outputs.
Connect the Probe Correctly.
If a probe is used, do not connect the ground lead to high voltage since it has the
isobaric electric potential as ground.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument and
check your manual for more information about ratings before connecting the
instrument.
Use Proper Overvoltage Protection.
Make sure that no overvoltage (such as that produced by a thunderstorm) can reach
the product, or else the operator might be exposed to the danger of electrical shock.
Do Not Operate without Covers.
Do not operate the instrument with covers or panels removed.
Do Not Insert Anything into the Holes of Fan.
Do not insert anything into the holes of the fan to avoid damaging the instrument.
Use Proper Fuse.
Please use the specified fuses.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is powered.

RIGOL
MSO1000Z/DS1000Z User’s Guide III
Do Not Operate with Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by qualified
service personnel before further operations. Any maintenance, adjustment or
replacement especially to circuits or accessories must be performed by RIGOL
authorized personnel.
Keep Well Ventilation.
Inadequate ventilation may cause an increase of temperature which would damage
the device. So please keep the instrument well ventilated and inspect the intake and
fan regularly.
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock, please
do not operate the instrument in a humid environment.
Do Not Operate in an Explosive Atmosphere.
In order to avoid damage to the device or personal injury, it is important to operate
the device away from an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in the air, please keep the surface of
the device clean and dry.
Electrostatic Prevention.
Operate the instrument in an electrostatic discharge protective area to avoid damage
induced by static discharges. Always ground both the internal and external
conductors of the cable to release static before connecting it to the instrument.
Proper Use of Battery.
If a battery is supplied, it must not be exposed to high temperature or in contact with
fire. Keep it out of the reach of children. Improper change of battery (note: lithium
battery) may cause explosion. Use RIGOL specified battery only.
Handling Safety.
Please handle with care during transportation to avoid damage to buttons, knob
interfaces and other parts on the panels.

RIGOL
IV MSO1000Z/DS1000Z User’s Guide
Safety Terms and Symbols
Terms Used in this Manual. These terms may appear in this manual:
WARNING
Warning statements indicate the conditions or practices that could result in
injury or loss of life.
CAUTION
Caution statements indicate the conditions or practices that could result in
damage to this product or other property.
Terms Used on the Product. These terms may appear on the Product:
DANGER
indicates an injury or hazard may immediately happen.
WARNING
indicates an injury or hazard may be accessible potentially.
CAUTION
indicates potential damage to the instrument or other property might
occur.
Symbols Used on the Product. These symbols may appear on the product:
Hazardous
Voltage
Safety
Warning
Protective
Earth
Terminal
Chassis
Ground
Test
Ground

RIGOL
MSO1000Z/DS1000Z User’s Guide V
Allgemeine Sicherheits Informationen
Überprüfen Sie diefolgenden Sicherheitshinweise
sorgfältigumPersonenschädenoderSchäden am Gerätundan damit verbundenen
weiteren Gerätenzu vermeiden. Zur Vermeidung vonGefahren, nutzen Sie bitte das
Gerät nur so, wiein diesem Handbuchangegeben.
Um Feuer oder Verletzungen zu vermeiden, verwenden Sie ein
ordnungsgemäßes Netzkabel.
Verwenden Sie für dieses Gerät nur das für ihr Land zugelassene und genehmigte
Netzkabel.
Erden des Gerätes.
Das Gerät ist durch den Schutzleiter im Netzkabel geerdet. Um Gefahren durch
elektrischen Schlag zu vermeiden, ist es unerlässlich, die Erdung durchzuführen. Erst
dann dürfen weitere Ein- oder Ausgänge verbunden werden.
Anschluss einesTastkopfes.
Die Erdungsklemmen der Sonden sindauf dem gleichen Spannungspegel des
Instruments geerdet. SchließenSie die Erdungsklemmen an keine hohe Spannung
an.
Beachten Sie alle Anschlüsse.
Zur Vermeidung von Feuer oder Stromschlag, beachten Sie alle Bemerkungen und
Markierungen auf dem Instrument. Befolgen Sie die Bedienungsanleitung für weitere
Informationen, bevor Sie weitere Anschlüsse an das Instrument legen.
Verwenden Sie einen geeigneten Überspannungsschutz.
Stellen Sie sicher, daß keinerlei Überspannung (wie z.B. durch Gewitter verursacht)
das Gerät erreichen kann. Andernfallsbestehtfür den Anwender die
GefahreinesStromschlages.
Nicht ohne Abdeckung einschalten.
Betreiben Sie das Gerät nicht mit entfernten Gehäuse-Abdeckungen.
Betreiben Sie das Gerät nicht geöffnet.
Der Betrieb mit offenen oder entfernten Gehäuseteilen ist nicht zulässig. Nichts in
entsprechende Öffnungen stecken (Lüfter z.B.)
Passende Sicherung verwenden.
Setzen Sie nur die spezifikationsgemäßen Sicherungen ein.
Vermeiden Sie ungeschützte Verbindungen.
Berühren Sie keine unisolierten Verbindungen oder Baugruppen, während das Gerät
in Betrieb ist.

RIGOL
VI MSO1000Z/DS1000Z User’s Guide
Betreiben Sie das Gerät nicht im Fehlerfall.
Wenn Sie am Gerät einen Defekt vermuten, sorgen Sie dafür, bevor Sie das Gerät
wieder betreiben, dass eine Untersuchung durch qualifiziertes Kundendienstpersonal
durchgeführt wird.Jedwede Wartung, Einstellarbeiten oder Austausch von Teilen am
Gerät, sowie am Zubehör dürfen nur von RIGOL autorisiertem Personal
durchgeführt werden.
Belüftung sicherstellen.
Unzureichende Belüftung kann zu Temperaturanstiegen und somit zu thermischen
Schäden am Gerät führen. Stellen Sie deswegen die Belüftung sicher und
kontrollieren regelmäßig Lüfter und Belüftungsöffnungen.
Nicht in feuchter Umgebung betreiben.
Zur Vermeidung von Kurzschluß im Geräteinneren und Stromschlag betreiben Sie das
Gerät bitte niemals in feuchter Umgebung.
Nicht in explosiver Atmosphäre betreiben.
Zur Vermeidung von Personen- und Sachschäden ist es unumgänglich, das Gerät
ausschließlich fernab jedweder explosiven Atmosphäre zu betreiben.
Geräteoberflächen sauber und trocken halten.
Um den Einfluß von Staub und Feuchtigkeit aus der Luft auszuschließen, halten Sie
bitte die Geräteoberflächen sauber und trocken.
Schutz gegen elektrostatische Entladung (ESD).
Sorgen Sie für eine elektrostatisch geschützte Umgebung, um somit Schäden und
Funktionsstörungen durch ESD zu vermeiden. Erden Sie vor dem Anschluß immer
Innen- und Außenleiter der Verbindungsleitung, um statische Aufladung zu entladen.
Die richtige Verwendung desAkku.
Wenneine Batterieverwendet wird, vermeiden Sie hohe Temperaturen bzw. Feuer
ausgesetzt werden.Bewahren Sie es außerhalbder Reichweitevon Kindern
auf.UnsachgemäßeÄnderung derBatterie(Anmerkung:Lithium-Batterie)kann zu einer
Explosion führen. VerwendenSie nur von RIGOLangegebenenAkkus.
Sicherer Transport.
Transportieren Sie das Gerät sorgfältig (Verpackung!), um Schäden an
Bedienelementen, Anschlüssen und anderen Teilen zu vermeiden.

RIGOL
MSO1000Z/DS1000Z User’s Guide VII
Sicherheits Begriffe und Symbole
Begriffe in diesem Guide. Diese Begriffe können in diesem Handbuch auftauchen:
WARNING
Die Kennzeichnung WARNING beschreibt Gefahrenquellen die leibliche
Schäden oder den Tod von Personen zur Folge haben können.
CAUTION
Die Kennzeichnung Caution (Vorsicht) beschreibt Gefahrenquellen die
Schäden am Gerät hervorrufen können.
Begriffe auf dem Produkt. Diese Bedingungen können auf dem Produkt
erscheinen:
DANGER
weist auf eine Verletzung oder Gefährdung hin, die sofort
geschehen kann.
WARNING
weist auf eine Verletzung oder Gefährdung hin, die möglicherweise
nicht sofort geschehen.
CAUTION
bedeutet, dass eine mögliche Beschädigung des Instruments oder
anderer Gegenstände auftreten kann.
Symbole auf dem Produkt. Diese Symbole können auf dem Produkt erscheinen:
GefährlicheS
pannung Sicherheits- Hinweis Schutz-erde Gehäusemasse Erde

RIGOL
VIII MSO1000Z/DS1000Z User’s Guide
Measurement Category
Measurement Category
MSO1000Z/DS1000Z series digital oscilloscopes can make measurements in
Measurement Category I.
WARNING
This oscilloscope can only be used for measurements within its specified
measurement categories.
Measurement Category Definitions
Measurement category I is for measurements performed on circuits not directly
connected to MAINS. Examples are measurements on circuits not derived from
MAINS, and specially protected (internal) MAINS derived circuits. In the latter case,
transient stresses are variable. For that reason, the transient withstand capability of
the equipment is made known to the user.
Measurement category II is for measurements performed on circuits directly
connected to low voltage installations. Examples are measurements on household
appliances, portable tools and similar equipment.
Measurement category III is for measurements performed in building installations.
Examples are measurements on distribution boards, circuit-breakers, wiring
(including cables, bus-bars, junction boxes, switches and socket-outlets) in fixed
installations, equipment for industrial use and some other equipment. For example,
stationary motors with permanent connection to a fixed installation.
Measurement category IV is for measurements performed at the source of a
low-voltage installation. Examples are electricity meters and measurements on
primary overcurrent protection devices and ripple control units.

RIGOL
MSO1000Z/DS1000Z User’s Guide IX
Ventilation Requirement
This oscilloscope uses fan to force cooling. Please make sure that the air intake and
exhaust areas are free from obstructions and have free air. When using the
oscilloscope in a bench-top or rack setting, provide at least 10 cm clearance beside,
above and behind the instrument for adequate ventilation.
WARNING
Inadequate ventilation may cause a temperature increase which can
damage the instrument. So please keep the instrument well ventilated
during operation and inspect the intake and fan regularly.

RIGOL
X MSO1000Z/DS1000Z User’s Guide
Working Environment
Temperature
Operating: 0℃to +50℃
Non-operating: -40℃to +70℃
Humidity
0℃to +30℃: ≤95％relative humidity
+30℃to +40℃: ≤75％relative humidity
+40℃to +50℃: ≤45％relative humidity
WARNING
To avoid short circuits inside the instrument or electric shocks, please do
not operate in humid environment.
Altitude
Operating: less than 3 km
Non-operating: less than 15 km
Installation (overvoltage) Category
This product is powered by mains conforming to installation (overvoltage) category
II.
WARNING
Make sure that no overvoltage (such as that produced by a thunderstorm)
can reach the product, or else the operator might be exposed to the
danger of electric shock.
Installation (overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. In these
terminals, precautions are done to limit the transient voltage to the corresponding
low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line (AC power).
Pollution Degree
Degree 2
Pollution Degree Definitions
Pollution degree 1: No pollution or only dry, non-conductive pollution occurs. The
pollution has no influence. For example, a clean room or air-conditioned office
environment.

RIGOL
MSO1000Z/DS1000Z User’s Guide XI
Pollution degree 2: Normally only dry, non-conductive pollution occurs. Occasionally
a temporary conductivity caused by condensation may occur. For example, general
indoor environment.
Pollution degree 3: Conductive pollution occurs, or dry, non-conductive pollution
occurs which becomes conductive due to condensation which is expected. For
example, sheltered outdoor environment.
Pollution degree 4: Pollution that generates persistent conductivity through
conductive dust, rain, or snow. For example, outdoor locations.
Safety Class
Class 1 – Grounded Product

RIGOL
XII MSO1000Z/DS1000Z User’s Guide
General Care and Cleaning
General Care:
Do not store or leave the instrument at places where the instrument will be exposed
to direct sunlight for long periods of time.
Cleaning:
Clean the instrument regularly according to its operating conditions. To clean the
exterior surface:
1. Disconnect the instrument from all power sources.
2. Clean the loose dust on the outside of the instrument with a lint- free cloth (with
mild detergent or water). When cleaning the LCD, take care to avoid scarifying
it.
CAUTION
To avoid damage to the instrument, do not expose it to corrosive liquids.
WARNING
To avoid injury resulting from short circuit, make sure the instrument is
completely dry before reconnecting it to a power source.
Environmental Considerations
The following symbol indicates that this product complies with the WEEE Directive
2002/96/EC.
Product End-of-Life Handling
The equipment may contain substances that could be harmful to the environment or
human health. In order to avoid release of such substances into the environment and
harm to human health, we encourage you to recycle this product in an appropriate
system that will ensure that most of the materials are reused or recycled
appropriately. Please contact your local authorities for disposal or recycling
information.

RIGOL
MSO1000Z/DS1000Z User’s Guide XIII
MSO1000Z/DS1000Z Series Overview
MSO1000Z is a mixed signal digital oscilloscope aimed at the embedded design and
test fields. It allows users to measure analog and digital signals at the same time.
MSO1000Z/DS1000Z series is a multifunctional and high-performance digital
oscilloscope designed on the basis of the UltraVision technique developed by RIGOL.
Featuring extremely high memory depth, wide dynamic range, clear display,
excellent waveform capture rate and comprehensive triggering functions, it is a
useful commissioning instrument for various fields such as communication,
aerospace, defense, embedded systems, computers, research and education.
MSO1000Z/DS1000Z is the one with the most comprehensive functions and the most
outstanding specifications among the 100 MHz bandwidth digital oscilloscopes.
Main features:
1 GSa/s real-time sample rate of the analog channels; up to 24 Mpts memory
depth (option) and 12 Mpts standard memory depth
1 GSa/s real-time sample rate of the digital channels
100 MHz, 70 MHz and 50 MHz analog channel bandwidth
4+16-channel MSO1000Z series mixed signal digital oscilloscope
Built-in dual-channel 25 MHz signal source (only applicable to MSO1000Z-S and
DS1000Z-S models)
30 000 wfms/s (dots display) waveform capture rate
Real-time hardware waveform recording and playback functions; up to 60000
frames of waveform can be recorded
Multi-degree gray scale display
Low base noise, 1 mV/div to 10 V/div ultra-wide vertical dynamic range
7.0 inch WVGA (800*480) TFT LCD, with ultra-wide screen, vivid picture, low
power consumption and long service life
Adjustable waveform brightness
Auto setting of waveform display (AUTO)
Up to 15 kinds of trigger functions, including various protocol triggers
Standard parallel decoding, support multiple serial decoding options
Auto measurement of 33 waveform parameters (with statistics)
Fine delayed sweep function
Built-in FFT function
Multiple waveform math operation functions
Pass/fail test function
Standard interfaces: USB Device, USB HOST, LAN, Aux, GPIB (extended via the
USB HOST interface)
Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick,
economic and efficient creation and reconfiguration of test system
Support remote command control
Built-in help to facilitate information acquisition
Support multiple languages and Chinese/English input
Novel and delicate industrial design and easy operation

RIGOL
XIV MSO1000Z/DS1000Z User’s Guide
Document Overview
Main Topics of this Manual:
Chapter 1 Quick Start
Introduce the preparations before using the oscilloscope and provide a basic
introduction of the instrument.
Chapter 2 To Set the Vertical System
Introduce the vertical system functions of the oscilloscope.
Chapter 3 To Set the Horizontal System
Introduce the horizontal system functions of the oscilloscope.
Chapter 4 To Set the Sample System
Introduce the sample system functions of the oscilloscope.
Chapter 5 To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling, trigger holdoff, external trigger and
various trigger types of the oscilloscope.
Chapter 6 MATH and Measurement
Introduce how to make math operation, cursor and auto measurements.
Chapter 7 Digital Channel
Introduce how to use the digital channels of the mixed signal digital oscilloscope.
Chapter 8 Protocol Decoding
Introduce how to decode the input signal using those common protocols.
Chapter 9 Reference Waveform
Introduce how to compare the input waveform with the reference waveform.
Chapter 10 Pass/Fail Test
Introduce how to monitor the input signal using the Pass/Fail test.
Chapter 11 Waveform Record
Introduce how to analyze the input signal using waveform record.
Chapter 12 Display Control
Introduce how to control the display of the oscilloscope.
Chapter 13 Signal Source
Introduce how to use the built-in signal source.

RIGOL
MSO1000Z/DS1000Z User’s Guide XV
Chapter 14 Store and Recall
Introduce how to store and recall the measurement result and the setting of the
oscilloscope.
Chapter 15 Accessibility Setting
Introduce how to set the remote interfaces and system-related functions.
Chapter 16 Remote Control
Introduce how to control the oscilloscope remotely.
Chapter 17 Troubleshooting
Introduce how to deal with the common failures of the oscilloscope.
Chapter 18 Specifications
Provide the specifications and general specifications of the oscilloscope.
Chapter 19 Appendix
Provide common information such as the options and accessories.
Format Conventions in this Manual:
1. Key
The front panel keys are denoted by the format of “Button Name (Bold) + Text
Box”, for example, Utility denotes the “Utility” key.
2. Menu
The menu items are denoted by the format of “Menu Word (Bold) + Character
Shading”, for example, System denotes the “System” menu item under Utility.
3. Operation Step
The next step of operation is denoted by an arrow “”, for example, Utility 
System denotes pressing Utility at the front panel and then pressing System.
4. Knob
Label
Knob
Label
Knob
HORIZONTAL
SCALE
Horizontal Scale Knob
VERTICAL
SCALE
Vertical Scale Knob
HORIZONTAL
POSITION
Horizontal Position
Knob VERTICAL
POSITION
Vertical Position
Knob
TRIGGER
LEVEL
Trigger Level Knob
-- --

RIGOL
XVI MSO1000Z/DS1000Z User’s Guide
Content Conventions in this Manual:
MSO1000Z/DS1000Z series includes the following models. This manual takes
MSO1104Z-S for example to illustrate the functions and performances of
MSO1000Z/DS1000Z series.
Model Analog
Bandwidth
Number of
Analog
Channels
Number of Source
Channels
Number of
Digital
Channels
MSO1104Z-S
100 MHz
4
2
16
MSO1074Z-S
70 MHz
4
2
16
MSO1104Z
100 MHz
4
--
16
MSO1074Z
70 MHz
4
--
16
DS1104Z-S
100 MHz
4
2
--
DS1074Z-S
70 MHz
4
2
--
DS1104Z
100 MHz
4
--
--
DS1074Z
70 MHz
4
--
--
DS1054Z
50 MHz
4
--
--
Manuals of this Product:
The manuals of this product include the quick guide, user’s guide, programming
guide and data sheet. The latest versions of the manuals can be downloaded from
www.rigol.com.

ContentsRIGOL
MSO1000Z/DS1000Z User’s Guide XVII
Contents
Guaranty and Declaration.........................................................................I
Safety Requirement................................................................................II
General Safety Summary...........................................................................II
Safety Terms and Symbols .......................................................................IV
Allgemeine Sicherheits Informationen.........................................................V
Sicherheits Begriffe und Symbole.............................................................VII
Measurement Category..........................................................................VIII
Ventilation Requirement...........................................................................IX
Working Environment ...............................................................................X
General Care and Cleaning......................................................................XII
Environmental Considerations..................................................................XII
MSO1000Z/DS1000Z Series Overview................................................ XIII
Document Overview............................................................................. XIV
Chapter 1 Quick Start.........................................................................1-1
General Inspection ................................................................................ 1-2
Appearance and Dimensions................................................................... 1-3
To Prepare the Oscilloscope for Use......................................................... 1-4
To Adjust the Supporting Legs.......................................................... 1-4
To Connect to Power Supply............................................................. 1-4
Power-on Inspection ....................................................................... 1-5
To Connect the Probe...................................................................... 1-5
Function Inspection......................................................................... 1-7
Probe Compensation....................................................................... 1-8
Front
Panel Overview............................................................................. 1-9
Rear Panel Overview.............................................................................1-10
Front Panel Function Overview...............................................................1-12
VERTICAL .....................................................................................1-12
Logic Analyzer...............................................................................1-13
Signal Source ................................................................................1-13
HORIZONTAL ................................................................................1-14
TRIGGER ......................................................................................1-15
CLEAR ..........................................................................................1-15
AUTO............................................................................................1-15
RUN/STOP ....................................................................................1-16
SINGLE.........................................................................................1-16
Multifunction Knob.........................................................................1-16
Function Menus.............................................................................1-17
Print.............................................................................................1-18
User Interface......................................................................................1-19
Parameter Setting Method.....................................................................1-23
To Use the Security Lock.......................................................................1-24

RIGOL Contents
XVIII MSO1000Z/DS1000Z User’s Guide
To Use the Built-in Help System.............................................................1-25
Chapter 2 To Set the Vertical System................................................. 2-1
To Enable the Analog Channel.................................................................2-2
Channel Coupling...................................................................................2-2
Bandwidth Limit.....................................................................................2-3
Probe Ratio ...........................................................................................2-3
Waveform Invert....................................................................................2-4
Vertical Scale.........................................................................................2-4
Amplitude Unit.......................................................................................2-5
Channel Label........................................................................................2-5
Delay Calibration of the Analog Channel...................................................2-7
Chapter 3 To Set the Horizontal System ............................................ 3-1
Delayed Sweep......................................................................................3-2
Time Base Mode ....................................................................................3-3
YT Mode.........................................................................................3-3
XY Mode.........................................................................................3-3
Roll Mode .......................................................................................3-5
Chapter 4 To Set the Sample System................................................. 4-1
Acquisition Mode....................................................................................4-2
Normal...........................................................................................4-2
Peak Detect ....................................................................................4-2
Average..........................................................................................4-2
High Resolution...............................................................................4-3
Sin(x)/x.................................................................................................4-4
Sample Rate..........................................................................................4-4
Memory Depth.......................................................................................4-6
Antialiasing............................................................................................4-7
Chapter 5 To Trigger the Oscilloscope................................................ 5-1
Trigger Source.......................................................................................5-2
Trigger Mode.........................................................................................5-3
Trigger Coupling.....................................................................................5-4
Trigger Holdoff.......................................................................................5-5
Noise Rejection......................................................................................5-5
Trigger Type ..........................................................................................5-6
Edge Trigger ...................................................................................5-7
Pulse Trigger...................................................................................5-8
Slope Trigger.................................................................................5-10
Video Trigger.................................................................................5-13
Pattern Trigger ..............................................................................5-15
Duration Trigger ............................................................................5-17
TimeOut Trigger (Option) ...............................................................5-19
Runt Trigger (Option).....................................................................5-21
Window Trigger (Option)................................................................5-23
Delay Trigger (Option)....................................................................5-25