Rinnai Pro Series User manual

Pro Series Wi-Fi
User guide

Wi-Fi control
The Rinnai Pro Series come with Wi-Fi capability as standard, which
features Wi-Fi control via an App.
Simple to activate and easy to use, the ‘NetHome Plus’ App can be
downloaded via Google Play or the App store on a compatible mobile
device.
Once installed and registered, you can operate your appliance on the
go. Basic functions like ON/OFF, temperature control, and fan speed
can be accessed through the App.
Best of all, the Wi-Fi control allows you to switch on your Pro Series
from outside the home, creating the ultimate in convenience and
comfort.
For more information about buying, using, and servicing of Rinnai
appliances call: 0800 RINNAI (0800 746 624).
Rinnai New Zealand Limited
105 Pavilion Drive, Mangere, Auckland
PO Box 53177, Auckland Airport, Auckland 2150
Phone: [phone]
Email: [email protected]
Web: rinnai.co.nz
youtube.com/rinnainz
facebook.com/rinnainz

Overview...............................................................4
User registration ..................................................5
Device setup - using scan for nearby devices......6
Device setup - using manual setup ......................8
Special App features.............................................10
Contents
NetHome plus is a third party App not run by RInnai.
For this App to run the home’s Internet router must be running on 2.4 GHz (not
5 GHz), check the Wi-Fi settings on your device.

4| Pro Series Wi-Fi control user guide 01-22
Overview
Your home’s Internet router relays requests from the App
to control your air conditioner just like your normal remote
controller.
Set your favourite temperature before you come home.
The steps to register and connect are:
1. Download and install the NetHome Plus App on a
compatible mobile device.
2. Complete the App registration by creating an account, this
must be done in the home where the Pro Series unit is.
3. Pair your mobile device to the Pro Series unit via the
home router.
Important
When connecting the device you must nish all the steps
within eight minutes after powering on the unit, otherwise
you’ll need to switch the unit o󰀨 and on again and go through
the process again.
Additional App tips for successful connection

Pro Series Wi-Fi control user guide 01-22 | 5
User registration
Before opening the App ensure your mobile device is connected to the wireless router and that the
router is on before doing your user registration and network conguration.
Download the NetHome plus app from Google Play or the App Store.
1. Open the App and sign in. 2. Create account,
select region, tick terms
and privacy, and click on
‘Register’.
3. Agree permission and
privacy. It looks like it wants
to take over, but in the App
it will ask permission before
accessing camera, location
etc.
4. Once ‘Agree’ is selected in the previous step you will receive an email from [email protected]
with the subject ‘Hi, please activate your account to complete the registration’. The email will
contain a long URL link to activate your account. Once this has been clicked you will receive an
‘Activation Successful’ message. Registration is now complete. The next step will be to pair your
mobile device to the Pro Series unit.
[email protected] Hi, please activate your account to complete the registration

6| Pro Series Wi-Fi control user guide 01-22
Device setup - using scan for nearby devices
1. Open the App, this should
take you to the ‘Welcome
Home’ screen to setup your Pro
Series. Select ‘Add Device’.
2. Read the guide information
to make sure there are no
barriers to setup and click OK.
3. Try using the easier option
of ‘Scan for nearby devices’.
7. Choose an existing name/
location or customise with a
new name.
8. Bluetooth network
conguration is successful,
you should now see the Pro
Series device in the Welcome
Home screen.
This setup processes uses Bluetooth to locate and congure the device.
If the Bluetooth network
conguration fails please go
through the manual setup
process by selecting the
appliance type. Refer p.8.

Pro Series Wi-Fi control user guide 01-22 | 7
4. The Pro Series is a Split-
Type Ac, click to add.
5. This screen will display
the home wi-, in this
example ‘Smart-Pro’, enter
the home wi- password
and ‘Start Conguration’.
6. Conguration screens

8| Pro Series Wi-Fi control user guide 01-22
Device setup - using manual setup
1. Open the App, this should
take you to the ‘Welcome
Home’ screen to setup your Pro
Series. Select ‘Add Device’.
2. Read the guide information
to make sure there are no
barriers to setup and click OK.
3. Click ‘Split-type AC’, which
is what the Pro Series is.
7. Select the home wi- and
enter the wi- password.
8. If you see this screen
the network conguration is
successful.
9. Conguration success, you
can see the device in the list.
There is a possibility that the device status may still show as being o󰀪ine. If this occurs turn
o󰀨 the Pro Series unit and then turn it on again. The unit status should come online after a few
minutes.

Pro Series Wi-Fi control user guide 01-22 | 9
4. Choose ‘Manual
Setup’.
5. Turn the Pro Series on, wait for
ve seconds and select ‘Next’.
Press the LED button on the
controller 7 times until ‘AP’ ashes
in the digital display. Disregard ‘Do
Not Disturb’, this is N/A for the Pro
Series.
6. Click ‘Go to WLAN List’.
N.B: Andorid and iOS screens
will look di󰀨erent during this
part of the process.
Using the App
When you select the device you will get a screen
that looks something like this. You can access more
features by selecting the di󰀨erent features in the top
of the screen.
Lu󰀩ng in this example is a fancy way of saying up or
down (vertical louvre).
The App should be straightforward and intuitive to
use. The screen-grabs on the following pages show
some of the special functions.
Open the App.
Standard App features
On/O󰀨 Set temperature
Mode function Fan speed adjustment
ECO mode Left and right swing function
Upper and lower swing function °C / °F switch
Self cleaning Upper and direct blow
Turbo

10 | Pro Series Wi-Fi control user guide 01-22
Schedule (timers)
There are multiple options to set timer schedules.
Sleep
This function gently regulates the set temperature to prevent excessive, draft free, heating or
cooling during sleep. It allows the set temperature to increase or decrease 0.5-1 °C in an hour, up
to a maximum of 2 °C above or below the set point (over a 10 hour period).
Special App features