Ripack 2500 User manual
GROUPE SEFMAT
R
YOUR PROTECTION
BY EXCELLENCE
USER’S GUIDE
RIPACK 2500
REGISTER YOUR PRODUCT
ONLINE WARRANTY CONTRACT
GAS CYLINDER CART
Ideal to hold and carry the gas cylinder safely,
this accessory offers portability in conformity
The gas cylinder cart increases the operator’s
GAS HOSE REEL WINDER
Heavy duty construction for industrial application : corrosion
MULTICOVER FILM SEALERS
The Multicover sealers allow to make pallet covers and bags from
Ripack Heat Gun Sealing
Electrical impulse sealing
2nd reel in option
TURBOPACK SHRINK COLUMN
INDEPENDENT AND MOBILE
The Turbopack is moved to the pallets,
thus avoiding the handling of unsteady
FLEXIBLE
No limitation in length or width of the
TOOL BAG CONTENT
SECURIPACK
CALPACK PALLET RAISER
Quick and easy to set up, the Calpack allows the film to shrink under
GROUPE SEFMAT
R
2500
HAND-HELD PROPANE-FIRED SHRINK GUN FOR
SHRINK-WRAPPING PLASTIC FILMS
USER’S GUIDE
CONTENTS
WARNINGS
OPERATION
CONNECTIONS
SPARE PARTS
EXAMPLES OF USE
MAINTENANCE
WARRANTY
EXPLODED VIEW
SPARE PARTS LIST
15
18
22
27
................................................................
.............................................................
......................................................
........................................................
.............................................
........................................................
.............................................................
...................................................
...........................................
WARNINGS
TO BE READ BEFORE STARTING FOR THE FIRST TIME
Do not use the device to shrink the plastic lm on a oor made of
combustible material (wood, plastic, etc...).
Delineate a working area such that the tip of the thermal lance is
always at least more than 1,5 m inside this area and prohibit access
to unauthorised individuals.
Make sure there are no leaks on the ttings and inspect the pipe for
cracks or loose connections.
Have to hand an appropriate re extinguisher or suitably-sized spray
lled with water
Avoid wearing highly ammable nylon or similar clothing
Wear heat-resistant gloves while using the device
Maintain strict supervision for at least 2 hours after retraction.
Check that the regulator ts properly with the gas cylinder.
This appliance is meant exclusively for professional use and for shrinking
- 9 -
products or liquids that inflame spontaneously, either processed in bulk or
packed, and do not use the appliance in the storage areas of these products
This appliance, like all other gas appliances, consumes air and produces
combustion fumes that contain CO2 and CO.
Exposure to high concentrations of the latter gas is lethal. Make sure
there is sufficient ventilation in accordance with the amount of time the
appliance is used (see "Technical Characteristics").
We recommend that the appliance be used in a room without specific
Before using the appliance, make sure that you are conforming to the guidelines
towards yourself, other persons or animals, towards the gas bottle
- 10 -
We draw the attention of operators to the fact that within the danger zone, there is
a possible risk of burning for persons and animals, and goods can be damaged
In use, the gun must always be in motion so that the material used does not
This temperature depends on the operating distance, the exposure time and
This appliance, which is designed for applying plastic films by heating, can also
be used for other purposes where the products can withstand the heat produced
manufacturer's guidelines of the product that is being handled must be followed at
To operate the appliance safely, you must follow the warnings mentioned
above as well as the guidelines provided by the manufacturer of the materials
adjustment of the appliance for the different materials being handled, depend
- 12 -
20 cm
AIR
IGNITER
GAS TAP
BEGINNING
B
Always contact your RIPACK distributor for all maintenance work and
Ignition is performed using a piezoelectric lighter that is activated
simultaneously with the release of gas activated by the trigger, which
Its original and patented design ensures combustion without heating
A security valve system cuts off the gas supply in the event that the hose
- 13 -
PROPANE GAS APPLIANCE
Weight
Air intake
Weight
Noise level
Energy source
Noise level
Energy source
Propane gas
Propane gas
2,11 lb
- 14 -
OPERATION
Before operating the appliance you must read all the warnings mentioned
above and make sure that using the appliance is not forbidden by the
manufacturer of the materials that you are going to handle.
With this appliance you must use the ORIGINAL hose and SECURIPACK
that were supplied.
FORBIDDEN WITH ALL USES
LIQUID PROPANE GAS
BOTTLE ON ITS SIDE
in gas phase, contained in bottles of different
Always connect and disconnect the bottles a long way from any flames
- 15 -
CONNECTIONS
Before connecting the
SECURIPACK to the
gas bottle, make sure
the sealing gasket is
positioned correctly
for systems using this
In other cases, make
- 16 -
IGNITING THE RIPACK 2500
POWER KNOB
TIGHTNESS
Use a bubble spray or some
soapy water to check that
there are no leaks in the
parts that have been screwed
connections)
- 17 -
The SECURIPACK automatically cuts
off the supply of gas if the pressure
drops below the minimum level necessary
This is the case when:
reduced power: change the bottle);
case, change the bottle temporarily or wait until the normal pressure returns,
NEVER WORK WHILE HOLDING
THE RED BUTTON
NEVER HEAT A GAS BOTTLE WITH A
FLAME.
WHEN YOU HAVE FINISHED
WORKING, ALWAYS CLOSE THE
GAS BOTTLE VALVE AND EMPTY
THE HOSE BY PRESSING THE
TRIGGER.
- 18 -
SPARE PARTS
THE COMPANY RIPACK SHALL NOT BE HELD LIABLE IN THE EVENT
THAT THE GUN IS DISMANTLED.
Contact your dealer if the RIPACK
EXAMPLES OF USE
The pallet must be lifted so that the four corners
are accessible: the purpose of this is to allow the
film to be shrunk under the pallet and so ensure
very strong cohesion between the pallet and the
RIPACK product range that is designed specially to
wider than your pallet and sufficiently long to
Apply the heat in a continuous movement and at a
NEVER STAY ON THE SAME SPOT
SHRINK-WRAPPING A LOADED PALLET
SHRINK-WRAPPING RECOMMENDATIONS
(in the absence of instructions provided by the film manufacturer):
- 19 -
CHECK CAREFULLY FOR AT LEAST 2 HOURS
AFTER SHRINK-WRAPPING.
The various films react differently, so you must
observe the reaction and adapt your speed and
wrapped, continue the operation for each side and
The film is already stretched along the sides
so you should apply less heat on the top in order to prevent
When you have stopped applying heat with the gun,
on the quality, the thickness and the type of load that
you wait until the cover has cooled off and everything
After cooling and before storage, always check that
the cover and the wrapped goods are in good
- 20 -
PACKAGING
All kinds of objects with irregular shapes can also
To obtain a good film joint, you need to provide
Start by heating the film in a continuous movement
and then put pressure on this part to connect the
The combustion nozzle can rotate freely and
- 21 -
MAINTENANCE
MAINTENANCE
MALFUNCTION DIAGNOSIS :
NO GAS COMING OUT OF YOUR RIPACK 2500
(The internal safety of the
gas cylinder can shut off
the flow if the valve
is opened too much).
NOTE: THE RED BUTTON CUTS OFF THE GAS SUPPLY BELOW A
PRESSURE THAT IS TOO LOW FOR THE OPERATION OF THE
RIPACK 2500.
Provide a replacement cylinder
while the gas warms up.
Store the bottles in a
temperate room.
NOTE: THE PRESSURE OF THE GAS IN ACYLINDER IS PROPORTIONAL TO THE TEMPERATURE OF THE GAS.
- 22 -
Table of contents
Other Ripack Power Tools manuals
Popular Power Tools manuals by other brands
Coleman
Coleman Powermate 024-0080CT instruction manual
Chicago Electric
Chicago Electric PROFESSIONAL Series Owner's manual & safety instructions
Craftsman
Craftsman 113.213722 owner's manual
Haas
Haas VF Series Operator's manual
Festool
Festool PSC 420 EB Original operating manual
Campbell Hausfeld
Campbell Hausfeld TL0501 operating instructions
Makita
Makita DJS130 instruction manual
Villager
Villager VLN 9520 Original instruction manual
Senator
Senator SEN-557-0400K operating instructions
MK Diamond Products
MK Diamond Products MK 770 Owner's manual & operating instructions
SCHUNK
SCHUNK NST3 series Assembly and operating manual
Ingersoll-Rand
Ingersoll-Rand 8-EU Series Product information
