Ripack 3000 Series User manual
GROUPE SEFMAT
R
YOUR PROTECTION
BY EXCELLENCE
USER’S GUIDE
RIPACK 3000
RIPACK 3000 +
REGISTER YOUR PRODUCT
ONLINE WARRANTY CONTRACT
RIPACK ACCESSORIES
MODULAR EXTENSIONS
Quick and easy assembly of one or more
extensions wands on the Ripack Series 3000
All components are integrated and protected
from the environment, use extension wands
PIVOTING ARM REST
The pivoting arm rest provides increased
comfort during use with an extension and
GAS CYLINDER CART
Ideal to hold and carry the gas cylinder safely,
this accessory offers portability in conformity
The gas cylinder cart increases the operator’s
GAS HOSE REEL WINDER
Heavy duty construction for industrial application : corrosion
MULTICOVER FILM SEALERS
The Multicover sealers allow to make pallet covers and bags from
Ripack Heat Gun Sealing
Electrical impulse sealing
2nd reel in option
TURBOPACK SHRINK COLUMN
INDEPENDENT AND MOBILE
The Turbopack is moved to the pallets,
thus avoiding the handling of unsteady
FLEXIBLE
No limitation in length or width of the
CALPACK PALLET RAISER
TOOL BAG CONTENT
Quick and easy to set up, the Calpack allows the film to shrink under
SECURIPACK
GROUPE SEFMAT
R
RIPACK 3000
RIPACK 3000 +
HAND-HELD PROPANE-FIRED SHRINK GUN FOR
SHRINK-WRAPPING PLASTIC FILMS
USER’S GUIDE
CONTENTS
WARNINGS
OPERATION
CONNECTIONS
8
13
...............................................................
...........................................................
.....................................................
EXAMPLES OF USE
MAINTENANCE
17
20
........................................
.....................................................
WARRANTY
EXPLODED VIEW
SPARE PARTS LIST
27
.............................................................
..................................................
..............................................
SPARE PARTS.......................................................23
WARNINGS
TO BE READ BEFORE STARTING FOR THE FIRST TIME
Do not use this device in regulated areas with specific fire or
Do not use the device to shrink the plastic lm on a oor made of
combustible material (wood, plastic, etc...).
Delineate a working area such that the tip of the thermal lance is
always at least more than 1,5 m inside this area and prohibit access
to unauthorised individuals.
Make sure there are no leaks on the ttings and inspect the pipe for
cracks or loose connections.
Have to hand an appropriate re extinguisher or suitably-sized spray
lled with water
Avoid wearing highly ammable nylon or similar clothing
Wear heat-resistant gloves while using the device
Maintain strict supervision for at least 2 hours after retraction.
Check that the regulator ts properly with the gas cylinder.
This appliance is meant exclusively for professional use and for shrinking
Users of the Ripack Series 3000 shrink gun must read this user’s guide
completely and must be trained for the applications that require the use of
- 8 -
Do not use this appliance for shrinking plastic film on materials, substances,
products or liquids that inflame spontaneously, either processed in bulk or
packed, and do not use the appliance in the storage areas of these products
Do not use this appliance for shrinking plastic film on a floor that is made of
For all work inside professional workshops, the gas bottle must be placed
This appliance, like all other gas appliances, consumes air and produces
combustion fumes that contain CO2 and CO.
Exposure to high concentrations of the latter gas is lethal. Make sure
there is sufficient ventilation in accordance with the amount of time the
appliance is used (see "Technical Characteristics").
We recommend that the appliance be used in a room without specific
Before using the appliance, make sure that you are conforming to the guidelines
towards yourself, other persons or animals, towards the gas bottle
- 9 -
This appliance, which is designed for applying plastic films by heating, can also
be used for other purposes where the products can withstand the heat produced
manufacturer's guidelines of the product that is being handled must be followed
To operate the appliance safely, you must follow the warnings mentioned
above as well as the guidelines provided by the manufacturer of the materials
adjustment of the appliance for the different materials being handled, depend
We draw the attention of operators to the fact that within the danger zone, there is
a possible risk of burning for persons and animals, and goods can be damaged
In use, the gun must always be in motion so that the material used does not
This temperature depends on the operating distance, the exposure time and
- 10 -
Always contact your RIPACK distributor for all maintenance work and
The RIPACK Series 3000 propane works with propane according to the
Ignition is performed using a piezoelectric lighter that is activated
simultaneously with the release of gas activated by the trigger, which is
The RIPACK Series 3000 is a gun incorporating several safety mechanisms:
FLAME STABILISATION
GRID
ASPIRATED AIR
IGNITER
GAS TAP
FLAME
BEGINNING
B
- 11 -
PROPANE GAS APPLIANCE
- 12 -
Length
Weight
Air intake
Length
Weight
CO emission vol %
CO2 emission vol %
Noise level
Energy source
Other energy source
CO emission vol %
CO2 emission vol %
Noise level
Energy source
Other energy source
Natural gas with conversion kit
Natural gas with conversion kit
Propane gas
Propane gas
OPERATION
Before operating the appliance you must read all the warnings mentioned
above and make sure that using the appliance is not forbidden by the
manufacturer of the materials that you are going to handle.
With this appliance you must use the ORIGINAL hose and SECURIPACK
that were supplied.
FORBIDDEN WITH ALL USES
LIQUID PROPANE GAS
BOTTLE ON ITS SIDE
The Ripack Series 3000 works with PROPANE gas
in gas phase, contained in bottles of different
Always connect and disconnect the bottles a long way from any flames
For all work inside professional workshops, the bottle must be placed on
- 13 -
CONNECTIONS
Before connecting the
SECURIPACK to the
gas bottle, make sure
the sealing gasket is
positioned correctly
for systems using this
In other cases, make
- 14 -
Use a bubble spray or some
soapy water to check that
there are no leaks in the
parts that have been screwed
connections)
IGNITING THE RIPACK SERIES 3000
POWER KNOB
TIGHTNESS
- 15 -
SPARE PARTS
THE COMPANY RIPACK SHALL NOT BE HELD LIABLE IN THE EVENT
THAT THE GUN IS DISMANTLED.
Contact your dealer if the RIPACK
Only the procedures described in the
The SECURIPACK automatically cuts
off the supply of gas if the pressure
drops below the minimum level necessary
This is the case when:
reduced power: change the bottle);
change the bottle temporarily or wait until the normal pressure returns, especially if you
NEVER HEAT A GAS BOTTLE WITH A
FLAME.
WHEN YOU HAVE FINISHED
WORKING, ALWAYS CLOSE THE
GAS BOTTLE VALVE AND EMPTY
THE HOSE BY PRESSING THE
TRIGGER.
NEVER WORK WHILE HOLDING
THE RED BUTTON
- 16 -
EXAMPLES OF USE
The pallet must be lifted so that the four corners are
accessible: the purpose of this is to allow the film to be
shrunk under the pallet and so ensure very strong
You will find an accessory in the RIPACK product range
that is designed specially to keep pallets lifted from the
than your pallet and sufficiently long to be able to be
Ignite your RIPACK Series 3000 as explained in the
(in the absence of instructions provided by the film manufacturer):
Remain at a distance of at least about 30 centimetres
Apply the heat in a continuous movement and at a
NEVER STAY ON THE SAME SPOT
SHRINK-WRAPPING A LOADED PALLET
SHRINK-WRAPPING RECOMMENDATIONS
- 17 -
The various films react differently, so you must
observe the reaction and adapt your speed and
You can also adjust the power of the RIPACK Series
wrapped, continue the operation for each side and
The film is already stretched along the sides
so you should apply less heat on the top in order to prevent
When you have stopped applying heat with the gun,
on the quality, the thickness and the type of load that
you wait until the cover has cooled off and everything
After cooling and before storage, always check that
the cover and the wrapped goods are in good
CHECK CAREFULLY FOR AT LEAST 2 HOURS
AFTER SHRINK-WRAPPING.
- 18 -
PACKAGING
All kinds of objects with irregular shapes can also
To obtain a good film joint, you need to provide
Start by heating the film in a continuous movement
and then put pressure on this part to connect the
wrapping by holding the appliance at least 30 cm
The combustion nozzle can rotate freely and
- 19 -
Other manuals for 3000 Series
1
Table of contents
Other Ripack Power Tools manuals
