ritm Voyager 15 User manual

Saint Petersburg, 2016
Voyager 15
Quick start guide

www.ritm.ru/en 2
Voyager 15. Quick start guide.
Preparing to use the device
Before starting to work with GPS-tracker, make the following
steps:
• Open the bottom lid.
• Put your SIM Cards into SIM holder, Please make sure,
that your SIM Card does not have a password.
• Put your SD Card into SD-2 slot. You should use SD Card
class 10 with no less then 8 Gb space.
• Put the battery into the box.
• Close the lid.

www.ritm.ru/en 3
Voyager 15. Quick start guide.
• Open the top lid.
• Put the Hard Drive inside.

www.ritm.ru/en 4
Voyager 15. Quick start guide.
GPS-tracker connections
• Put the GPS antenna into the GPS slot.
• Put the GSM antenna into the GSM slot.
• If it is needed, please connect your cameras into slots
1,2,3 and 4.
• The Power slot has contacts for +12/+24V, GND, and
contacts for each camera.
• If you need you can put Display into HDMI slot, LAN
cable and USB GSM 4G modem.

www.ritm.ru/en 5
Voyager 15. Quick start guide.
Download the software
• Go to our website www.ritm.ru, in the right top corner
you can choose the english language.
• Go to “Downloads”, open the “Сommon software for the
set-up of all of Ritm’s devices”, click on link and
download le.

www.ritm.ru/en 6
Voyager 15. Quick start guide.
Conguration of GPS-tracker
In order to congure your device you must connect either
through LAN or via Wi-Fi.
We will congure via Wi-Fi.
When you will power up your device, after a few minutes you
will see the fast ashing GLONASS/GPS and GSM/Wi-Fi LED
light.
Wait for a few minutes and Wi-Fi LED light will ash slower.
Now on your PC you should nd default Wi-Fi connection,
called V15-A20-MACaddressOfYourDevice. Connect to it.

www.ritm.ru/en 7
Voyager 15. Quick start guide.
Open downloaded software, you will see a picture like this.
You can choose the language in the right bottom corner.
Choose connection type: (you need IP - direct connection to a
device).
Type IP address and Port as follows: IP - 192.168.42.1,
Port - 53462.
Click “Connect”.
After the sucessful connection you will see this page.

www.ritm.ru/en 8
Voyager 15. Quick start guide.
There are a lot of settings, rst, if you have in menu item called
“Available update”(red color), you should click on it. After
clicking on “Start updating”, you will see updating progress.
You should go to Device Details, where you can nd common
information about your Voyager 15.
Here you should copy the IMEI of your Voyager 15, and check
the registration in the GSM network. If you have bad reception
conditions of GSM, or SIM card doesn’t work, you will see, that
SIM has “No registration in GSM network”.

www.ritm.ru/en 9
Voyager 15. Quick start guide.
You have to congure your GPRS connection, go to section
“GPRS parameters” and ll it according to your own settings,
you can learn the settings from your GSM provider. Make sure,
there is no tick for “Specify APN conguration automatically”.

www.ritm.ru/en 10
Voyager 15. Quick start guide.
Now we will set up the connection to eu.ritm.ru server.
1. Click on the Coordinate receipt servers,
2. Type the number of your object and leave the password
as default.
3. Type in the box “IP address of the main coordinate receipt
server or its domain name” address dev1.eu.ritm.ru and
in the box “Port of the main coordinate receipt server”
port number 9426.
4. Then type in the box “IP address of the reserve coordinate
receipt server or its domain name” address dev2.eu.ritm.ru
and in the box “Port of the reserve coordinate receipt
server” port number 9426.
When you change some settings, you have to click on “Save
changes” before you leave the current page!

www.ritm.ru/en 11
Voyager 15. Quick start guide.
Now, to congure your video, you have to make your device
connect to Wi-Fi. Open “WiFi parameters”, and connect to your
Wi-Fi regular way, choose the name and type the password.
Go to iVideon parameters and copy the MAC-address of your device.

www.ritm.ru/en 12
Voyager 15. Quick start guide.
Go to iVideon website, https://www.ivideon.com,
Create an account and sign up.

www.ritm.ru/en 13
Voyager 15. Quick start guide.
Now you can add your device to iVideon service.
Click “Add a camera or DVR”, or Plus.
At rst page, choose the “iVideon-powered camera”.

www.ritm.ru/en 14
Voyager 15. Quick start guide.
Type MAC-address of your device.
Now you should see picture like that. In your device iVideon
settings will be changed automatically.

www.ritm.ru/en 15
Voyager 15. Quick start guide.
Final step, you need to format your SD Card or HDD.
Go to “Service” and click “Format” to make your device work
with space on your drive (HDD or SD Card).
GeoRitm
Now you are ready to go to www.eu.ritm.ru. You can choose
language in the top right corner. Click on registration button.

www.ritm.ru/en 16
Voyager 15. Quick start guide.
Fill in the registration form.
After that you will get the e-mail for authorization, follow the
link in that email and you will see this page.

www.ritm.ru/en 17
Voyager 15. Quick start guide.
Click on the button “Open Monitoring interface”. You can select
“Run Object Add Wizard automatically”, or open this wizard later.
Now you should see the main page of GeoRitm interface.
If you didn’t open the Add Object Wizard yet, you can click on a
plus.

www.ritm.ru/en 18
Voyager 15. Quick start guide.
Add group and object. You will see this page.
Click “Next”.
Here you should put the IMEI, which you took from the settings
of Voyager 15. Click “Next”.

www.ritm.ru/en 19
Voyager 15. Quick start guide.
Click “Next” again.
If you see the page, server now identied your Voyager 15.
Click “Next”.
Here you can give a name for your object and add it to the
group. Every object should be in one of the groups. You have 2
default groups: Vehicles and Real Estate.

www.ritm.ru/en 20
Voyager 15. Quick start guide.
You should choose a Vehicle.
After that click “Next”. Your Voyager 15 is ready to work. When
you will choose your object in the left menu, you should see
your Voyager 15 on the map. Remember, that GPS should have
good reception conditions.
You can click on the image of your Voyager 15 on map and see
the events, track, and general report or object’s card (you can
open it from the left menu as well).