Riverside Furniture Bancroft 81703 User manual

Riverside
FURNITURE
email: [email protected]
Bancroft Tables
Assembly Instructions Made in China
Page 1 of 2
Step 1. To prevent possible scratches or damage, assemble the Table upside down on a soft surface such as a blanket
or carpet.
Step 2. Attach LEGS (C) to the TOP ASSEMBLY (B) using M 5
16" x 11
2"ALLEN HEAD BOLT (J) through M 5
16" SPRING
WASHER (M) and M 5
16" FLAT WASHER (L).Do not tighten Bolts until after Step 4.
Step 3. Attach BOTTOM SHELF (F) to the LEGS (C) using M 5
16" x 5
8"ALLEN HEAD BOLT (H) through M 5
16" SPRING
WASHER (M) and M 5
16" FLAT WASHER (L) and 'L'-BRACKETS (I).
Step 4. Attach CASTERS (G) to the BOTTOM SHELF (F) using M 5
16"x1"ALLEN HEAD BOLT (K) through M 5 16"
SPRING WASHER (M) and M 5
16" FLAT WASHER (L).
Step 5. Tighten all Bolts using the ALLEN WRENCH (N). Then attach COVER PANEL (D) to TOP ASSEMBLY (B).
Step 6. Carefully turn the Table upright and move to the desired location in the room. Peel and press a GLASS PAD
(A) onto the ledge for the glass at each corner and at the middle of the two long sides of the TOP ASSEMBLY.
Carefully place the TOP GLASS (D) into the TOP ASSEMBLY, on the pads.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during
shipment.
6 pcs.
Top Assembly
1 pc.
Leg
4 pcs. 4 pcs.
Cover Panel
32 pcs.8 pcs. 32 pcs.
M5
16" x 11
2" Allen
Head Bolt
M5
16" Flat
Washer
M5
16" Spring
Washer
1 pc.
5mm Allen Wrench
Top Glass
1 pc.
L4"xW3" x H21
2"
Caster
4 pcs. 8 pcs.
"L" Bracket
Bottom Shelf
16 pcs.
M5
16" x 1" Allen
Head Bolt
1 pc.
M5
16" x 5 8" Allen
Head Bolt
4 pcs.
Glass Pad
1
2" x 1 2" x 1 8"

Riverside
FURNITURE
email: [email protected]
Bancroft Tables
Assembly Instructions
Page 2 of 2