Riverside Furniture 92615 User manual

Chair Back
Components and Hardware List
Front Leg (Left)
Seat Frame
1 pc. 1 pc.
Ø5/16"
Spring Washer
1 pc.
Ø5/16"
Flat Washer
Allen Head Bolt
92615 / 16 / 17
4 pcs.
4mm Allen Key
Clipped Top Uph Stool
Page 1 of 3
Made in Viet Nam
STEP 2: Do not fully tighten the bolts.
10 pcs. 10 pcs.
1 pc.
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture must
be assembled on a soft surface such as a blanket or carpet.
Allen Head Bolt
C
A
B
IL
K
M
4 pcs.
A
B
M
J
K
L
Screw Driver
not included
M
H
K
L
Front Leg (Right)
1 pc. 1 pc.
1 pc. 1 pc.
D
E
F G H
6 pcs.
N
Wood Screw
Ø4x45 mm STEP 1: Remove Velcro strips on the seat frame
to assemble the chair back and front legs.
Velcro
Ø5/16'' x 18 x 1-3/4"
Allen Head Bolt
J2 pcs.
B
Ø5/16'' x 18 x 2-1/8"
Ø5/16'' x 18 x 3-3/8"
Front Stretcher
15-7/8" x 1-1/4" x 3/4"
Side Stretcher (Left)
18-7/8" x 1-1/4" x 3/4"
Side Stretcher (Right)
18-7/8" x 1-1/4" x 3/4"
6 pcs.
Upholstery Tack

Page 2 of 3
Made in Viet Nam
92615 / 16 / 17 Clipped Top Uph Stool
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
N
C
D
E
STEP 4: Do not fully tighten the screws.
STEP 5: Using the Allen Key to tighten all bolts.
A
B
F
G
N
L
K
I
M
N
STEP 6: Using the Philips Head Screw driver to tighten all screws.
STEP 3: Do not fully tighten the screws.

Page 3 of 3
Made in Viet Nam
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
COMPLETE
STEP 7: Attach all Velcro strips to the seat frame.
Velcro
92615 / 16 / 17 Clipped Top Uph Stool
Upholstery
Tack
If atack comesloose, use ahammer to tap it
backinto place or replace it with anew one.