Riverside Furniture Sophie User manual

#50355
UPH Arm Chair 2in
Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
Sophie
Dining Room
Assembly Instructions
Steps:
1. Place the Chair Back Assembly (A) on a soft surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3-1/8" long Bolt (E) Spring
Washer (H) and Flat Washer (I) into the back corners of the Seat and 1-3/4" long Bolt
(F) Spring Washer (H) and Flat Washer (I) into the middle of the Seat, as shown. Do
not fully tighten any Bolts until last Step.

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
3. Attach the Front Legs (D) to the Chair Seat (B)
by using the 2-1/8" long Bolts (G), Spring
Washers (H) and Flat Washers (I) as shown in
Step 3.
4. Attach the Left and Right Arms (C) to the
Chair Seat and Back by using the 1-3/4" long
Bolts (F), Spring Washers (H) and Flat
Washers (J) as shown in Step 4.
5. Turn the Chair upright on a flat surface to
level chair and tighten all Bolts using the Allen
Wrench (M).
Sophie
Dining Room
Assembly Instructions