Riverside Furniture Mirabelle User manual

Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
#26255
Chair-Lattice Back UPH
Mirabelle
Dining Room
Assembly Instructions
Steps:
1. Place the Chair Back Assembly (A) on a soft and smooth surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3" long Bolt (D) Spring Washer (G) and
Flat Washer (H) into the back corners of the Seat and 1-1/2" long Bolt (F) Spring Washer (G) and
Flat Washer (H) into the middle of the Seat, as shown. Do not fully tighten Bolts until after
next step.

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
Mirabelle
Dining Room
Assembly Instructions
3. Attach Front Legs (C) to the Chair Seat (B) by using the 2-1/4" long
Bolts (F), Spring Washer (G) and Flat Washer (H) as shown in Step 3.
4. Turn the Chair upright on a flat surface to level chair and tighten all
Bolts using the Allen Wrench (I).