Riverside Furniture Myra Dining Room 59550 User manual

#59550
RoundDining Table-Top
#59357
RoundDining TableBase
Componentspacked with the #59550 Table Top
Madein Viet Nam
Page 1of2
K
Be sure tocheckall packingmaterialcarefullyfor small parts, whichmayhave come loose inside the carton
duringshipment.
To prevent possible scratches anddamage, this furniture must be assembledbytwopeople ona soft
surface suchas a blanket or carpet.
Components& Hardwarepacked with the#59357 Table Base
#59550-59357-1
Step1: Attachthe LowerBridge Panel(C)ontop ofthe Base (D)usingthe 1-3/8"AllenHeadBolts (H),
SpringWashers (J) andFlat Washers (K). Tightenusingthe AllenWrench(L).
Step 1
Myra
DiningRoom
AssemblyInstructions

Madein Viet Nam
Page 2of2
Step3:Usingtwopeople,carefullyset
theassembledtableupright.
Detail B
Step4: To install the TableTop Leaf(B),
reachunderneaththe sides ofthe Table
Top andtwist the handle ofthe Locks to
unlock. Pull the twohalves ofthe Table
Top open, place the Leafinposition,
aligningthe pins withtheholes onthe
edges andpushthe halves backtogether.
Reachunderneaththe Table Top and
relock.
To prevent undue stress onthe DiningTable
if it is moved, usingtwopeople, always lift
andcarryyour DiningTable from one
locationtoanother.
#59550-59357-2
Myra
DiningRoom
AssemblyInstructions
Adjustableleveler
Step2:WiththeTableTopplacedupsidedown, position theassembledbaseontothebottomofthe
TableTop.Connectwiththe1-3/8"Allen HeadBolts(H)andthesameWashersas usedin previous
steps. Tightenwith theAllenWrench.