Onespace 50-JN22DSK User manual

7
,straptnemecalperrofstseuqer,smialcnoecivrestsetsafroF
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS
INDUSTRIAL DESK, INSET BLACK METAL
or questions, please visit our website.

PARTS LIST
Please look for part indicator on the side of the part. It is either stamped or on a labled sticker.
Tabletop Middle Tabletop End (x2)
Leg (x2) Support Bar (x2)
Rail (x2)

ASSEMLBY
Attach the Support Rails (D) to the Legs (C) using four 6x14mm Screws (1) (NOTE: These are the
shortest screws). Then secure the Support Rails together using a 6x20mm Screw (6) and Nut (2)
in the center.
TIP: It may be easier to complete this step with the front edge of the legs (indicated by the
arrows) resting on the oor.
Attach the Rails (E) to the Legs using four 6x30mm Screws (3).
EE

Leg assembly using twelve 6x30mm Screws and Washers (Note: Washers gobetweenthe Rails
and the Tabletop pieces).
TIP: Start with the outermost screws on each rail. Once those are in place, work your way inwards.
This will help align the rest of the screws.
A
B
B

• DO NOT stand on the table. Do not use the table as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This products is California 93120 Compliant for Formaldehyde.
6 of 6
table
This warranty is made only to the
original end-user customer acquiring the product directly from our authorized dealers as shown by
the original sales receipt. The
end-user customer remedy pursuant to this warranty is limited to repair or replacement of parts at our
o ption within a reasonable
amount of time. Comfort Products reserves the right to require damaged parts
to be returned to us upon request. Consent from us
must be obtained before any warranty work is p erformed. This warranty applies under conditions of normal use and is not
subject to defects caused by improper assembly or d isassembly; defects occurring after purchase due to product modication,
intentional damage, fire, misuse, negligence, or exposure to the elements;
labor or assembly cost. This warranty does not cover the
cost of transportation or labor . In no event shall webe liable in either tort or contract for any loss
or direct, special, incidental,
consequential or exemplary damages. This Limited Warranty
is NOT applicable to end user customers who use our product for
rental purposes. This warranty applies only to end- user customers in the United States. All warranties are limited to the original purchaser
for normal use.
The weight capacity is defined as 110pounds (unless otherwise speci ed). For claims or questions concerning this
warranty, please visit our website.
PLEASE VISIT OUR WEBSITE FOR WARRANTY INFORMATION
We warrant this product to be free from defects in material and workmanship for one (1) year.