Roberts STREAM 107 User manual

ROBERTS
DAB/FM/WiFi Radio with Internet Radio, Music Player and Spotify Connect
and remote control from ConnectR app for iPhone and Android
Please read this manual before use

Contents
Introduction......................................................................................... 1-8
Before you can use this product.......................................................... 1
About this instruction manual............................................................... 2
Controls and connections................................................................. 3-4
Battery operation .............................................................................. 5-6
Navigation controls........................................................................... 7-8
Configuration.................................................................................... 9-20
Plugging in and language selection................................................ 9-10
Clock and time settings ......................................................................11
Connecting to your computer network.......................................... 12-16
Manual network configuration....................................................... 17-19
Network remote control options......................................................... 20
Internet Radio mode....................................................................... 21-36
Internet Radio - the basics................................................................. 21
Selecting a radio station by location and genre............................ 22-24
Searching for a radio station by name............................................... 25
Selecting a new or popular station .................................................... 26
Selecting a podcast / BBC Listen Again ............................................ 27
Presetting stations............................................................................. 28
Display modes.............................................................................. 30-31
Customising your radio................................................................. 32-36
Music Player mode......................................................................... 37-50
Use with Windows, Apple Mac, Linux................................................ 37
Accessing your audio files via UPnP using Windows 7, 8 & 8.1... 38-39
Locating and playing media files using UPnP .............................. 40-43
Display modes................................................................................... 44
Playlists ........................................................................................ 45-47
Wake On LAN.................................................................................... 48
Prune servers .................................................................................... 48
Windows 'Play To' function (UPnP renderer)................................ 49-50
Spotify Connect.............................................................................. 51-55
Spotify Connect - the basics.............................................................. 51
Set up a Spotify Connect account ..................................................... 51
Playing music using Spotify Connect ................................................ 52
Controlling Spotify on your radio ....................................................... 53
Display modes - Spotify Connect ...................................................... 54
Streaming data rate........................................................................... 55
Friendly name.................................................................................... 55
DAB mode ...................................................................................... 56-64
Selecting a DAB radio station............................................................ 57
Display modes.............................................................................. 58-59
Finding new DAB radio stations ........................................................ 60
Manual Tuning................................................................................... 61
Dynamic Range Control settings ...................................................... 62
Station order setup ............................................................................ 63
Prune stations.................................................................................... 64
FM mode.......................................................................................... 65-70
Manual tuning.................................................................................... 66
Display modes................................................................................... 67
Scan setting....................................................................................... 68
Stereo / Mono switching .................................................................... 69
Presetting stations in DAB and FM modes........................................ 70
Clock and Alarms ........................................................................... 71-80
Automatically updating the clock ....................................................... 71
Setting the clock format..................................................................... 72
Manually setting the clock ............................................................ 73-74
Setting the alarm clock ................................................................. 75-78
Snooze timer ..................................................................................... 78
Disabling alarms................................................................................ 79
Sleep timer ........................................................................................ 80
Display and Audio .......................................................................... 81-85
Equaliser function......................................................................... 81-82
Brightness control.............................................................................. 83
Headphone socket............................................................................. 84
Inactive Standby feature.................................................................... 85
Information.................................................................................... 86-100
Factory reset...................................................................................... 86
Software update ................................................................................ 87
Network profiles................................................................................. 88
Software version display and Audio FAQ .......................................... 89
Friendly name.................................................................................... 90
Troubleshooting............................................................................ 91-92
Additional information concerning batteries.................................. 93-94
Audio codecs ..................................................................................... 95
Cautions and Specifications ......................................................... 96-97
Software License Information............................................................ 98
Guarantee........................................................................................ 100

Stream 107 radio features
The Roberts Stream 107 provides the following features in an attractive
compact unit:-
●Listen to local, regional, national and international broadcasts using
FM, DAB and Internet radio.
●Listen to over 1000 radio stations from around the country, and over
10,000 from around the world without using your PC.
●Listen to previously broadcast material from the BBC (using Podcasts
/ Listen Again).
●Listen to podcasts from a wide range of broadcasters.
●15 radio station presets (5 Internet Radio, 5 DAB and 5 FM).
●Use the Music Player to play your music collection from your
computer. Connection to Apple and Linux based computers is also
possible.
●MP3, WMA, AAC, FLAC and WAV formats are supported.
●The Stream 107 connects wirelessly to your home computer network.
Dual-band WiFi allows compatibility with a wide range of networks.
●WiFi Protected Setup (WPS) is supported for simpler setting up with
compatible wireless routers.
●Works with Windows 'Play to' function (as a UPnP renderer).
●Compatible with Spotify Connect, allowing your Spotify selections to
be played through the radio, remotely controlled from your iPhone,
iPad or Android device.
●The system menu can be configured to the following languages,
English, French, German, Italian, Danish, Spanish or Norwegian.
●Supports remote control from Apple iPhone, iPad and Android using
Roberts ConnectR app.
●All radio station presets, network configuration details and user
settings are retained in the event of a power failure.
●Clock display with time and date when in Standby.
●Two alarm timers with snooze feature to wake you to either a buzzer
or a radio alarm (alarms only operate when mains powered).
●Adjustable sleep timer, can be set to turn the radio off after a delay of
between 15 and 90 minutes.
●Power saving Inactive Standby.
●Easy-to-read colour graphic display with an adjustable display
backlight.
●Stereo headphone socket for private listening.
●Mains or battery powered using supplied mains adaptor, or 6 x LR6
(AA size) or rechargeable equivalent (not included).
●Built-in battery charger.

1
Before you can use this product
Before you can use your internet radio, you must have the following:
●A broadband Internet connection (not required for DAB, FM or Music
Player functions).
●A network router with WiFi capability connected to your broadband
Internet service.
●If your wireless network requires a security password to allow
connection, then you either need to know the WEP, WPA or WPA2
key used for encryption so that you can get the radio to communicate
with the network, or your router needs to offer WiFi Protected Setup
(WPS).
The radio is compatible with 802.11b, g, or n networks and can use 2.4GHz
or 5GHz WiFi frequency bands.
The radio will typically work within a 10-20 metre radius from your wireless
access point. The actual range achieved will depend upon the building
type, other nearby wireless networks, and possible interference sources.
DAB and FM radio functions can operate wherever the radio is able to
receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your network router
is powered up and working with your broadband Internet service (use
your computer, tablet or smart phone to verify this). To get this part of the
system working you must read the instructions supplied with the router.

About this instruction manual
This instruction manual is split into sections for each of the operating
modes of your Roberts Stream 107 radio. Each section is clearly identified
by the shaded heading in the top right hand corner of each pair of pages.
Before using the Internet Radio and Music Player functions, you will need
to connect your radio to your network using the WiFi connection. This is
covered in the section titled Configuration.
The Internet Radio section describes how to find radio stations to
listen to. These can be radio stations that you already know and listen
to conventionally, or new stations you may search for. You may set up
stations that you like as Favourites so that they are more readily accessible.
The section for the Music Player describes how you may play music files
that you may have stored on a computer connected to your network. The
use of Shared Media (using UPnP) is explained.
The Spotify Connect section explains the use of the radio in conjunction
with the Spotify internet based music streaming service.
The two sections for DAB and FM Radio describe how to use the radio
to listen to conventional radio broadcasts.
The section titled Clock and Alarms describes the different ways by
which the clock in the radio may be set, as well as explaining the use of
the alarms, snooze and sleep timer features.
The Display and Audio section shows how to adjust the display, and
use the equaliser.
The Information section includes troubleshooting, specifications and
warranty information.
2
Configuration
Internet Radio
Music Player
DAB Radio
FM Radio
Clock and Alarms
Display and Audio
(page 9)
(page 37)
(page 21)
(page 65)
(page 56)
(page 71)
(page 81)
Information (page 86)
Introduction
Spotify Connect (page 51)

3
Controls and connections
Front view
1. Mute / Sleep button
2. Preset 5 / Stop button
3. Forward button
4. Preset 4 / Play / Pause button
5. Back button
6. Preset 3 button
7. Menu button
8. Preset 2 / Fast-forward button
9. Info button
10. Preset 1 / Rewind button
11. Mode / Alarm button
12. DC In socket
13. Headphone socket
14. Speaker
15. Display panel
16. On / Standby button
17. Tuning / Select / Snooze control
18. Low battery indicator
19. Battery charge indicator
20. Volume Up button
21. Volume Down button
17
15
1
20
13
246810 357911
12
14
16
21
18
19

4
Controls and connections - cont.
Rear view
22. Battery compartment
23. WiFi antenna (internal)
24. Telescopic aerial
Introduction
24
22
23

5
Battery operation using alkaline batteries
(also see page 93 and 94)
1. Remove the battery cover on the back of the unit by pushing the battery
door in slightly and then downwards in the direction of the arrow.
2. Slide the switch inside the battery compartment to the Alkaline position
(down).
3. Insert six LR6 (AA size) alkaline batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown inside the battery compartment. Then replace
the battery cover.
• When the batteries are exhausted, the low battery indicator will show
red for a short while. The radio will then switch itself off. It may not be
possible to switch the radio back on until the batteries are replaced,
or until the radio is connected to the mains adaptor.
• If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
• We recommend for economy that the Stream 107 is powered using the
AC adaptor whenever possible with battery operation for occasional
or stand-by use only. The use of WiFi technology in the radio can
significantly affect battery life. If extended listening using batteries is
anticipated, then the use of rechargeable batteries is recommended.
• DAB and FM operating modes require less power than Internet radio
and the Music Player. Setting the "Keep Network Connected" option
to No will save power in DAB and FM modes (see page 20).
Warning: Internal battery switch MUST
be set to correct battery type before installing
batteries. Recommends using rechargeable
NiMH batteries.
2
IMPORTANT:
When using alkaline batteries the battery switch must be placed
in the alkaline position. Failure to do so could result in serious
damage to the batteries or radio.
Batteries should not be exposed to excessive heat such as
sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.

Introduction
6
Battery operation using rechargeable batteries
(also see page 93 and 94)
1. Remove the battery cover on the back of the unit by pushing the battery
door in slightly and then downwards in the direction of the arrow.
2. Slide the switch inside the battery compartment to the Rechargeable
position (up).
3. Insert six identical Rechargeable LR6 (AAsize) batteries into the spaces
in the compartment. Take care to ensure all batteries are inserted with
the correct polarity as shown inside the battery compartment. The radio
is designed to be used with Nickel Metal Hydride (NiMH) rechargeable
batteries. No other type of rechargeable battery should be used.
4. Plug the mains adaptor into your radio and then plug the adaptor into
the mains.
5. The charge indicator will flash green indicating batteries are charging.
Batteries will be fully charged in around 5 - 7 hours. The charge indicator
shows a steady green light when the battery charging is complete.
6. Under some conditions the charging indicator may switch off after
flashing only briefly.This may happen if the batteries are already freshly
charged, or if the radio detects that you may be attempting to recharge
alkaline batteries. In these cases the charging will be stopped.
If this happens with discharged batteries, try charging the batteries a
second time by removing and reconnecting the AC power adaptor. If
charging is stopped again then it is possible that the batteries are old
and may need to be replaced.
• When the batteries are exhausted, the low battery indicator will show
red for a short while. The radio will then switch itself off. It may not be
possible to switch the radio back on until the batteries are recharged,
or until the radio is connected to the mains adaptor.
• If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
Warning: Internal battery switch MUST
be set to correct battery type before installing
batteries. Recommends using rechargeable
NiMH batteries.
2
IMPORTANT:
You should never attempt deliberately to recharge alkaline
batteries in the radio. Attempted recharging of alkaline batteries
can be dangerous.
When using rechargeable batteries the battery switch must be
placed in the Rechargeable position. Batteries will only be charged
when the radio is switched off and connected to the AC adaptor.
Batteries should not be exposed to excessive heat such as
sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.

7
Navigation controls
This page describes the basic means of controlling your Stream 107
radio. Instructions for each operating mode are given in the later sections
of this book.
1. Pressing the On/Standby button brings your radio out of Standby
mode. Pressing On/Standby while the radio is in use and powered
from the mains adaptor will cause it to return to the Standby mode
with the clock display, or switch off when using batteries.
2. Pressing the Mode button gives you access to each of the operating
modes in turn: Internet Radio, Spotify, Music Player, DAB Radio and
FM Radio. Alternatively press the Mode button and then turn the
Tuning/Select control clockwise or anti-clockwise to highlight the
desired menu item then press the control to select that item.
3. Pressing the Menu button will access the menu system.
4. Many operations require the user to make a selection from the
menu. This is done using the Tuning/Select control. Turn the control
clockwise or anti-clockwise to highlight the desired menu item then
press the control to select that item.
If there are more than six items in a menu, then the display will
automatically scroll up or down so that the additional items become
visible. A sliding bar on the right will give an indication showing the
current portion of the menu that is displayed. If there are many items
in a menu, then the radio allows the menu to 'wrap around' in either
direction. This can make it easier to reach items at the end of a long
menu, such as a list of countries or Internet radio stations.
5. The Forward button may also be used to make selections from the
displayed menu. If an error is made when navigating the menus, it
is generally possible to go back to a higher level menu by pressing
the Back button.
6. The Info button allows the display of information relating to the radio
station or music file being played.
Note: In this booklet, press always means press and release. If it is
required to give a long press on a button this is described as press
and hold.
4
2
5
5
Internet radio
Spotify
Music player
DAB
FM
Sleep
Main menu
1
6
2
http://
Internet
Radio
DAB Radio
My Music
FM Radio
Internet radio
3

8
Introduction
3
2
There are several occasions when you may need to enter text characters into your radio. For example, when setting up the WiFi connection, or when
entering text for searches. When entering text you can use the Tuning/Select control alone or in conjunction with some of the buttons. The rotary
control allows you choose from all of the available characters, while the buttons allow you to move left and right through the list of characters. This
may be easier than only using the rotary control.
Navigation controls cont.
Text entry
1. Rotate the Tuning/Select control to highlight each character as needed
and press the control to enter each character into the radio.
Alternatively
2. To highlight the next character in the character display press the
Forward button.
3. To highlight the previous character in the character display press the
Back button.
4. To enter the highlighted text press and release the Tuning/Select
control.
5. The Info button allows quick access to the Backspace control. You
can then use the Tuning/Select control to access the OK and Cancel
options. Press Info again to go back to the character selection.
1-5
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123- jones
5

9
Setup wizard
Start now?
4,5
Setup wizard
Start now?
Configuration
Plugging in and language selection
1. Place your radio on a flat surface and plug the cable from the mains
adaptor into the DC input socket located on the left hand side of your
radio (marked 'DC') ensuring that the plug is pushed fully into the socket.
2. Plug the mains adaptor into a wall socket and switch on the socket.
IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio
from the mains, the mains adaptor should be removed from the mains
socket outlet completely.
3. When you apply power, the display on the radio will light up and say:
'ROBERTS' and 'Stream 107'.
If this is the first time that you use your radio (or a Factory Reset has
been carried out) the display will show 'Setup wizard' and 'YES' will be
highlighted on the screen.
4. By default your radio will display all menus and messages in English. If
English is your preferred language then press the Tuning/Select control
to select 'YES' and to begin setting up your radio.
If you selected 'YES', please skip to step 1 on page 11.
5. If your preferred language is not English, then rotate the Tuning/Select
control so that the 'NO' option is highlighted. Press the Tuning/Select
control to enter the selection.
Continue on the next page.

Configuration
10
Setup wizard
Run wizard again
at next start up?
Music player
DAB
FM
Sleep
Alarms
System settings
Main menu
Network
Time/Date
Backlight
Inactive Standby
Language
Factory Reset
System settings
English
French
German
Italian
Danish
Spanish
Language
*
Inactive Standby
Language
Factory Reset
Software update
Setup wizard
Info
System settings Setup wizard
Start now?
Plugging in and language selection - cont.
6. Your radio will ask whether the Setup Wizard should be run at the next start
up. Although the 'YES' option is highlighted if you wish to change the language
you should select the 'NO' option.
Rotate the Tuning/Select control to highlight the 'NO' option. Press the Tuning/
Select control.
7. Your radio will then display the Main menu. Rotate the Tuning/Select control
until 'System settings' is highlighted on the screen.
Press the Tuning/Select control to enter the System settings menu.
8. Rotate the Tuning/Select control until 'Language' is highlighted on the screen.
Press the Tuning/Select control to enter the Language options menu.
9. Rotate the Tuning/Select control until the desired language is highlighted on
the screen.
Press the Tuning/Select control to select the chosen language option.
The display will then change to show the System settings menu in the chosen
language.
10. Rotate the Tuning/Select control until the 'Setup wizard' option is highlighted
on the screen and then press the control.
If you change the language you will not see 'Setup wizard' in English. You
will see an equivalent menu item in your language - for example, 'Assistant
réglages' in French, or 'Installaz. guidata' in Italian.
11. Rotate the Tuning/Select control until 'YES' is highlighted on the screen
and press the control to select it. This will cause the radio to run the set up
procedure as if it had just been switched on for the first time, but it will do this
using the language selected in step 9, above.
12. Continue setting up your radio on the next page.
6-11

Date/Time
12/24 hour format
11
Auto update
Update from DAB
Update from FM
Update from Network
No update *
UTC + 00:00: Dublin, Lond
UTC + 00:30:
UTC + 01:00: Madrid, Am
UTC + 01:30:
UTC + 02:00: Athens, Cair
UTC + 02:30:
Set timezone
*
Daylight savings
Daylight savings
1-5
Clock and time settings
The following instructions assume that you have either just plugged in your
radio (see page 9) or that you have just specified the language option for the
menus (see page 10).
1. Rotate the Tuning/Select control to highlight the desired clock format (either
12 or 24 hour) then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu allowing you
to specify the auto-update option for the clock will be shown. The 'Update
from Network' option will be best for most users.
3. Rotate the Tuning/Select control to choose an auto-update option for the
clock. This can be updated from DAB or FM radio, from the Network, or
not updated. The default is to auto-update from the network. If you choose
another option go to 'Connecting to your computer network' on page 12.
Otherwise you will first need to select the correct time zone and daylight
savings setting, see the next steps. If you choose 'No update' you will need
to set the clock manually later, see page 73. Press the control to confirm
your choice.
4. Rotate the Tuning/Select control to highlight the time zone for your current
location. Press the Tuning/Select control to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or BST/
GMT adjustment).
Rotate the Tuning/Select control to highlight 'ON' or 'OFF' as required. The
asterisk shows the current setting. Press the control to make the selection.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is equivalent
to Greenwich Mean Time.
6. Continue setting up your radio on the next page.

Configuration
12
Network settings
Network wizard
Scanning...
Wlan region
Most of Europe
*
Network settings
Keep network connected?
Connecting to your computer network
Before you can use your Stream 107 radio to listen to internet radio or to music
streamed from your computer, it must first be connected to your computer network.
This section of this book describes how to connect the radio to your network using
the wireless (WiFi) connection.
The following instructions assume that you have just set up the clock and time options
using the Setup Wizard as described on the preceding page.
These instructions also apply to the Network Wizard in the Network Settings menu
(from step 3 onwards).
1. After setting the Daylight Savings options (see page 11), the display will show
the 'Keep network connected?' option. You should choose 'Yes' if you wish to
keep the radio connected to the network when it is in Standby mode. This will
allow remote control software to switch on your radio when needed.
If you choose 'No' then your radio will shut down its WiFi connection when it is
in Standby, DAB or FM modes. This minimises power consumption but it does
mean that you will need to switch the radio on manually in order to use either
Spotify Connect, the 'Play to' function or any remote control software such as
ConnectR app.
Rotate the Tuning/Select control to highlight the required option and then press
the control to make the selection.
2. After setting the Keep Connected option, the display will show a list of supported
WiFi regional options.
Rotate the Tuning/Select control to highlight the required region (for the UK
choose 'Most of Europe'), and then press the control to make the selection. Your
radio will then scan for available WiFi networks.
3. The radio will enter the Network Settings Wizard and will display 'Scanning...'.
The radio will automatically scan both 2.4GHz and 5GHz WiFi bands. After a
short while the display will show a list of the available WiFi networks.
1-3

13
Connecting to your computer network - cont.
You will first need to identify your network in the list of network names
presented by the Network Wizard. If no networks are found then
you may have to get your wireless router working (please see the
instructions supplied with it) or you may be too far from the router.
When the radio finds your wireless network, it displays the Network
Name (SSID) for the wireless access point on the screen. This is a
name that is allocated to the access point in your router by the person
who set up the network - for example: 'Jones family' or 'Paul's network'.
If the router supports WiFi Protected Setup, then '[WPS]' will be shown
in front of the SSID.
4. Rotate the Tuning/Select control to see the SSID for each wireless
network that has been found. If your network is shown proceed to step
6 on the next page. If it is not shown then proceed to step 5.
If you make a mistake at any point, use the Back option to go back to
the previous screen.
5. If your network is not found, it may be because the router is configured
not to broadcast the SSID. You should then use the Tuning/Select
control to highlight and select the '[Manual config]' option in order
to enter the network details manually. This is described in 'Manual
Network Configuration', see page 17.
If your network name is being broadcast, and it was not found, then
try re-scanning (press the Back button), and if necessary try moving
your radio to a location closer to your access point / router.
4-5
Jones family
[WPS] Paul’s network
Smith
Dad’s network
[Rescan]
[Manual config]
SSID
Jones family
[WPS] Paul’s network
Smith
Dad’s network
[Rescan]
[Manual config]
SSID

14
Configuration
Connecting to your computer network - cont.
6. When the SSID for the wireless network you wish to connect to is highlighted on
the screen, press the Tuning/Select control. If WiFi Protected Setup (WPS) was
indicated, you will see an additional menu at this point, otherwise proceed to step 7.
Choose one of the WPS menu options as required for your router (WPS may be via
push button, or using an identification number).
'Push Button' - the display prompts you to press the WPS button on your router and
then the Tuning/Select control on the radio. The two devices should then connect
with the encryption key sent automatically from the router to the radio.
'PIN' - the display shows an identification number which you must enter into your
router using a web browser (refer to your router's user documentation). You should
then press the Tuning/Select control on the radio. The two devices should then
connect with the encryption key sent automatically to the radio.
'Skip WPS' - if you wish to enter the encryption key yourself (or if it was previously
entered into the radio).
If you chose Push Button or PIN the screen will then show 'Connecting...' and then
'Setup wizard completed'. Press the Tuning/Select control to exit setup wizard and
then go to paragraph 10 on the next page.
7. If your network is configured without an encryption key, the screen should say
'Connecting...', and then 'Setup wizard completed'. Press the Tuning/Select control
to exit the setup wizard and show the main menu. If this is the case then you have
successfully connected your radio to your network, so please go to paragraph 10
on the next page.
8. If the screen displays 'Key:', it is because the network is using one of the encryption
systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will
need to enter the correct WEP or WPA key into the radio to allow it to communicate
with your wireless network. If you do not have the WEP or WPA key, then you should
obtain it from the person who set up your network. Some wireless routers may come
with an encryption key already set up by the supplier, in which case you should refer
to the documentation provided with it. WPA is used here to also include WPA2.
6-8
Jones family
[WPS] Paul’s network
Smith
Dad’s network
[Rescan]
[Manual config]
SSID
Network settings
Please wait
Connecting...
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
Push Button
PIN
Skip WPS
WPS Menu

15
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123- jones
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Internet radio
Spotify
Music player
DAB
FM
Sleep
Main menu
Network settings
Please wait
Connecting...
Connecting to your computer network - cont.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless
routers can also use pass-phrases for WEP but these are not supported by your
radio. WPA keys are usually set up using a pass-phrase of between 8 and 63
characters. Your radio accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the
Tuning/Select control. As you rotate the control, the highlight scrolls through
the available characters as well as the three controls on the right. The character
currently highlighted will be entered when you press the Tuning/Select control.
Do this as needed until the complete key has been entered. Remember, WEP
keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper
and lower case characters. You must enter the key exactly or the radio will not
connect to the network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the Info button and then use the Tuning/
Select control as needed. See also 'Text Entry' on page 8.
select ' ' to erase a character just entered (long press to clear)
select ' ' when the complete key has been entered
select ' ' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
display will show 'Key: [Set]'. If you have previously entered a different key, you must
clear this by selecting the ' ' symbol. This will remove the '[Set]' indication.
After the final character of the WEP or WPAkey has been entered, highlight the ' '
symbol and press the Tuning/Select control.The screen will show 'Connecting...'
and then 'Setup wizard completed'. Press the Tuning/Select control to the exit
setup wizard. The radio should now be able to connect to the network.
10. Once connected to the network (and therefore also to the internet) your radio will
display the main menu. Press and release the On/Standby button to put the radio
into Standby mode. If the radio is powered from the mains adaptor it should then
display the time as obtained from the Internet. If the time displayed is not correct
for any reason, it can easily be adjusted later, see page 73, 'Manually setting the
clock'.
9-10
10
9

16
Configuration
Last listened
Station list
System settings
Main menu
Internet radio
Network
Time/Date
Backlight
Inactive Standby
Language
Factory Reset
System settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Network settings
Network wizard
Scanning...
Connecting to your computer network - cont.
If you have followed the steps on the preceding pages successfully, your radio will have connected to your
router, and then made a connection to the Internet and set its clock. If this is the case, then you can try
listening to radio stations via the Internet as described on page 21 onwards.
Note: The clock display in Standby mode is only maintained when the radio is powered from the mains.
If you are powering the radio from batteries the clock will not be displayed and the radio will shut down
completely in order to minimise battery usage. The clock will be set to the current time the next time that
you switch on the radio, depending upon the clock update settings.
Changing the network connection
From time to time, you may find that you need to connect to different computer networks. The Internet
setup menu allows you to change your radio’s network settings, scan for an alternative wireless network,
or to manually configure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network profiles' on page 88.
If you have no need to do this, however, please skip to page 21.
Configuring the radio to use an alternative WiFi connection
1. From the Network settings menu select 'Network wizard'. This will present you with details of any WiFi
networks that are found. Scroll down the list using the Tuning/Select control to the desired network
name. Press the control to select this network.
The radio will then use its WiFi system to communicate with the network. Depending on the settings
for the new network you may need to enter an encryption key (see pages 14-15). By default the radio
will then acquire an IP address and other network settings from your router using DHCP.

17
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Connection type
Wireless
DHCP
DHCP enable
DHCP disable
IP settings
IP address
192 . 168 . 1 . 25
Subnet mask
255 . 255 . 255 . 0
Gateway address
Gateway address
192 . 168 . 1 . 1
Manual network configuration
If you do not wish to use DHCP for automatic configuration, or if your network is configured with a hidden
SSID, then you will need to enter some network settings manually. (Note - a hidden SSID may prevent
casual observers from detecting your network, but it is not recommended as a means of network security.)
1. From the radios Network settings menu, select 'Manual settings'. There are as many as nine settings
screens, shown by the '1 of 9' progress marker in the top right corner of the display.
2. The next menu asks whether you wish to use DHCP to configure your network parameters (IP address,
subnet mask, gateway address, etc.). Unless you are familiar with networking and related terminology,
we recommend that you allow the use of DHCP. Choose 'DHCP enable' unless you need to specify
the network details manually.
If you chose 'DHCP enable', please skip to step 6 on page 18 in order to set up the wireless connection
details.
If you chose 'DHCP disable' the next step is to set up the IP address.
3. The manually specified IP address should be chosen to be compatible with the settings in your router
and must be a unique address on your network. If you are using DHCP for some devices and static
(manually configured) IP addresses for others, the IP address used should fall outside the range that
the router may allocate using DHCP. Typically, the first three groups of digits will be the same for all
devices on your network. To enter the IP address, rotate the Tuning/Select control to set the value for
each group of digits and then press the control to enter the value and to move on to the next group.
When the IP address has been entered, the subnet mask should be entered. The subnet mask defines
which parts of the IP address are common across your network. For most small networks the subnet
mask will be 255.255.255.0 and this is entered in the same way.
4. The Gateway address is normally the IP address of the router through which the radio connects to the
internet and is entered in the same way as the previous addresses.