manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Robinsons
  6. •
  7. Lawn And Garden Equipment
  8. •
  9. Robinsons VICTORIAN EXTENSION User manual

Robinsons VICTORIAN EXTENSION User manual

This manual suits for next models

8

Other Robinsons Lawn And Garden Equipment manuals

Robinsons Regent User manual

Robinsons

Robinsons Regent User manual

Robinsons Victorian REIGATE 11 User manual

Robinsons

Robinsons Victorian REIGATE 11 User manual

Popular Lawn And Garden Equipment manuals by other brands

Sunforce SOLAR user manual

Sunforce

Sunforce SOLAR user manual

GARDEN OF EDEN 55627 user manual

GARDEN OF EDEN

GARDEN OF EDEN 55627 user manual

Goizper Group MATABI POLMINOR instruction manual

Goizper Group

Goizper Group MATABI POLMINOR instruction manual

Rain Bird 11000 Series Operation & maintenance manual

Rain Bird

Rain Bird 11000 Series Operation & maintenance manual

Cub Cadet BB 230 brochure

Cub Cadet

Cub Cadet BB 230 brochure

EXTOL PREMIUM 8891590 Translation of the original user manual

EXTOL PREMIUM

EXTOL PREMIUM 8891590 Translation of the original user manual

Snapper 690179 installation instructions

Snapper

Snapper 690179 installation instructions

Exmark SAR481KA30 Operator's manual

Exmark

Exmark SAR481KA30 Operator's manual

Yazoo/Kees Z12 Operator's manual

Yazoo/Kees

Yazoo/Kees Z12 Operator's manual

Makita EM408MP Original instruction manual

Makita

Makita EM408MP Original instruction manual

Exmark Quest Bagger Setup instructions

Exmark

Exmark Quest Bagger Setup instructions

Manitou Systems AS960 Operator's manual

Manitou Systems

Manitou Systems AS960 Operator's manual

Vertex 1/3 HP Maintenance instructions

Vertex

Vertex 1/3 HP Maintenance instructions

GHE AeroFlo 80 manual

GHE

GHE AeroFlo 80 manual

Land Pride Post Hole Diggers HD25 Operator's manual

Land Pride

Land Pride Post Hole Diggers HD25 Operator's manual

Yazoo/Kees Z9 Commercial Collection System Z9A Operator's & parts manual

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Operator's & parts manual

Premier designs WindGarden 26829 Assembly instructions

Premier designs

Premier designs WindGarden 26829 Assembly instructions

Snapper 1691351 installation instructions

Snapper

Snapper 1691351 installation instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

NOMINAL SIZE (mm)
6ft extension 1860
8ft extension 2480
10ft extension 3100
12ft extension 3720
4ft extension 1240
2
Thank you for purchasing your new Robinsons greenhouse. We recommend you familiarise yourself with the instructions and read all safety
information before you commence assembly. This instruction manual is also available online at www.robinsonsgreenhouses.co.uk
in our technical help section should you need to reprint it. Should you require any additional advice you can always call us on 01782 385409.
These instructions are to be used in conjunction with the main instruction manual (read them before this manual):
Safety Warning
 Glass and aluminium can potentially cause injury. Please ensure you wear protective goggles, gloves, headgear and suitable footwear when
assembling and glazing the building.
 Please remember that glass is fragile and should be handled with extreme care. Always clear up and dispose of any breakages immediately.
 Do not assemble the greenhouse in high winds.
 For safety reasons and ease of assembly, we recommend that this greenhouse is assembled by a minimum of two people.
 Please clear all lying snow from the greenhouse roof as it can cause the roof to buckle or collapse.
Site Preparation
 When selecting a site for your greenhouse, it is vital that you choose as flat and level an area as possible.
 A concrete or slabbed base will provide the most solid foundation for your greenhouse.
 IMPORTANT: Do not fix your building down until the building is fully assembled, including glazing.
 Avoid placing your greenhouse under trees or in other vulnerable locations.
 To minimise the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a hedgerow or garden fence.
Additional Considerations
 Please bear in mind that assembling your greenhouse can be time consuming. You may need to spread the construction over two or more
days. We recommend that you avoid leaving the building partially glazed. If you ever have to leave your greenhouse half assembled and not
anchored down, weigh it down with slabs or bags of sand to stop the wind moving it.
 You will find it helpful to prepare a large, clean and clear area in which to work in. A garage floor or flat lawn area is ideal.
 If you have arranged for someone to install your greenhouse for you, please check that all components are included. Some parts are numbered
and can be identified by a stamped or hand written number (without the ’D’). Alternatively, the components can be identified by their distinctive
profiles, lengths and quantities detailed in the parts list.
 Anchoring down your greenhouse should be the final stage of construction (including glazing).
 Once installed your greenhouse requires little maintenance, but to maintain the smooth running of
your door(s) WD40 or similar can be applied to the door wheels and lower door guides.
Guarantee
 Your new Robinsons greenhouse is guaranteed for 10 years against faulty manufacture of the framework. This does not include glazing, mov-
ing parts, accidental damage or wind damage.
KEY
SYMBOL
KEY DESCRIPTION
EXTERNAL VIEW
INTERNAL VIEW
THINK
CORRECT
TWIST TO LOCK
CUT TO LENGTH
639mm
D866
3
PLEASE CONTACT US FOR A BASE PLAN FOR ANY MODIFICATIONS
i.e. Drop door/s, dwarf wall, partition, etc…) NOT LISTED ON THIS PAGE.
MPORTANT: IF YOU HAVE ANYTHING OVERHANGING THE RIDGE ON
A LEAN-TO, PLEASE ALLOW HEIGHT CLEARANCE FOR THE ROOF VENT.
THE FOLLOWING DIMENSIONS ARE THE EXACT EXTERNAL BASE DIMENSIONS FOR THE ROBINSONS RANGE.
We cannot emphasis how important it is to have a proper base for your Robinsons Greenhouse to be erected upon.
It is essential that the BASE IS FLAT, LEVEL AND SQUARE AS WELL AS BEING SUBSTANTIAL enough to take the
weight of the greenhouse including its 4mm glass.
IMPORTANT: Do not anchor your greenhouse down until it is fully assembled including glazing unless you are 100% sure your base is
square and level. If not your glass will not fit properly.
THE BASE MUST BE FLAT, LEVEL AND SQUARE.
ROBINSONS
BASE PLANS
Note, when calculating the length of a unit that has an
extension you must add the main module dimension to
give you the overall length. See diagram below.
length
width
EXAMPLE (mm)
External dimension of an 8' x 24' greenhouse.
8 ' x 12' main module 2602 x 3872
12' extension 3720
Overall size 2602 x 7592
A brick perimeter base is equally suitable providing there
is a concrete foundation beneath it. We suggest using a
solid brick with no frogs or holes (quality stock bricks or
semi-engineering bricks). A brick plinth is an advantage
because it minimises the chances of any water running
back underneath the base cill.
Give yourself enough room around your base to allow for
fitting the glass and any on-going maintenance / clean-
ing. A slab base which is larger than the greenhouse is
the ideal solution.
4
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
LEFT HAND SIDE EXTENSION
D029L
1860 1
D024L 2480 1
D025L 3100 1
D026L 3720 1
DV217L
1860 1
DV214L 2480 1
DV215L 3100 1
DV216L 3720 1
D075L 1240 1
DV241L 1240 1
RIGHT HAND SIDE EXTENSION
D029R
1860 1
D024R 2480 1
D025R 3100 1
D026R 3720 1
DV217R
1860 1
DV214R 2480 1
DV215R 3100 1
DV216R 3720 1
D075R 1240 1
DV241R 1240 1
FRONT
REAR
VICTORIAN ROBINSONS EXTENSIONS VERY IMPORTANT INFORMATION:
If you have been supplied with an extension (i.e. your building is longer than 12’), your main building will differ in that the roof end and corner glazing
bars (on the end to which the extension will be fitted) are replaced with side and roof glazing bars from the extension module kit. These should be
fitted using 15mm bolts. In addition, it will be necessary to slide additional 10mm bolts into each side bar and roof bars to accommodate a reinforcing
channel (10mm bolts must be used here, 15mm bolts will get in the way when fitting the square a-frame tubing). You only need four side diagonal
braces per building (two each side), move the two (currently on main sides) nearest the extension join towards the rear.
Be careful not to mix up your extension cills and gutters. There will be a separate gutter and cill for the left and right side extensions. In
addition one set of holes in both the gutter, cill, and ridge sections are slightly closer together (586mm instead of 620mm). When fitting the extension
ridge, gutters and side cills, the 586mm hole centres at one end of the extension components must abut the main greenhouse. Each of the extension
joining plates should be initially attached to the main building and then onto the 586mm spaced hole end of each extension section.
IMPORTANT: Each glazing bar centre should then be 620mm apart. If not your glass will not fit properly. See next pages 6 and 7 for more details.
DWARF SIDES
D673
1114
D609
1160
6
8
10
12
RUBBER
1000
(1m)
14
20
26
34
2
4
10
STANDARD SIDES
D131
1630
D066
1676
6
8
10
12
RUBBER
1000
(1m)
22
28
34
42
2
4
14
D114
N/A2
D136
1546 2
D174 N/A
4 6 8 10
DV100
4
6
8
10
DV153
N/A 4 4 4 4
DV227 N/A 2
2
2
4
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
5
FS6006
FS6504
35mm
M6 S/S
SYBOLM6X11
10mm
66
72
78
84
SYBOLM6X15
15mm
12
14
16
18
SYNUTM6
M6
102
122
142
162
6
6
SYBOLM6X22
22mm
24
36
48
60
60
10
12
82
VICTORIAN RIDGE EXTENSION VARIABLES
DV205
1860 1
DV206 2480 1
DV207 3100 1
DV208 3720 1
D114 N/A 2
DV101
2
3
4
5
1
DV240 1240 1
VIC 8 WIDE BUILDING ROOF
D138
1167 1
DV222 1715
DV254
1790
6
8
10
12
RUBBER
1000
(1m)
22
30
36
44
2
4
15
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
VIC 11 WIDE BUILDING ROOF
D136
1546 1
DV223 2376
DV255
2450
6
8
10
12
RUBBER
1000
(1m)
30
40
50
60
2
4
20
Part
No.
Section Size
(mm)
6’
EX
8’
EX
10’
EX
12’
EX
4’
EX
6
D075L
D029L
D024L
D025L
D026L
DV227
586mm
DOOR
END
REAR
END
DV222
DV223
DV241R
DV217R
DV214R
DV215R
DV216R
620mm
620mm
620mm
D131
D673
DV241L
DV217L
DV214L
DV215L
DV216L
D136
DV153
DV227
D114
D138
D136
D114
DV222
DV223
D114
DV153
D136
D131
D673
DV240
DV205
DV206
DV207
DV208
D075R
D029R
D024R
D025R
D026R
7
D114
x2
15mm
D131
D673
D131
D673
D131
D673
DV222
DV223
DV222
DV223
D136
D138
D136
DV222
DV223
D136
x4
D114
x2
15mm
DV153
x2
10mm
x8
DV227
x1 x4
15mm
FLIP
VIEW
FS6006FS6504
DV240
DV205
DV206
DV207
DV208
8
D119
SILICONE
D170 (FOIL COVERED TAPE)
DV220
D201
D214
9
Fitting Robinsons slatted shelving and staging using the instructions is
usually quite straight forward. However if you have chosen a greenhouse
which includes A-frames or a partition then fitting the staging becomes
more complicated. In these instances some additional adaptation brackets
where A-frames are included, and some side height vertical bracings for a
partition.
You need to cut (using a hacksaw) the
staging slats to fit around the A-frames at
which ever height you have pre-
determined (we recommend 900mm up
from the bottom of the base rail for stag-
ing, and 260mm down from the top / back
of the gutter for the shelf).
Spare ground anchoring brackets can
be used to attach the shelf and staging
supports to the side of an A-frame or side
height vertical bracing when fitting
around a partition.
When adapting a shelf or staging section to fit around an A-frame
the slats can be cut in several ways to give a neat, level result.
900mm up from bottom of base rail.
260mm
10