Roca TONIC PREMIUM User manual

TONIC PREMIUM/TOTAL WHIRLPOOL BATHS

We congratulate you and thank you for purchasing this Roca product, which has been designed,
manufactured and checked by our technical staff.
Likewise, if you purchased the panel, it will include specific instructions for installing it.
EFFECTS OF MASSAGE
The action of the air bubbles on the body has been proven to be highly beneficial for the health.
The following effects are particularly worth mentioning:
- Stimulates and improves skin hygiene and cardiovascular circulation.
- Generally improves capillary and lymph circulation.
- Tones the muscles and oxygenates the skin.
- Particularly indicated in cases of muscle pain, lumbago, arthritis, post-operative convalescence,
stress and fatigue in general.
PRECAUTIONS
-This appliance can be used by children aged from 8 years and above and persons with re-
duced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved.
-Children shall not play with the appliance.
-Cleaning and user maintenance shall not be made by children without supervision.
- In spite of the preventive and relaxing therapeutic effects of hydro-massage, it is important to
note that in the case of acute conditions, uncompensated heart disease, serious hypertension or
certain infectious diseases, and in the case of certain groups (children, the elderly, and pregnant
women), certain special conditions regarding bath duration, temperature and frequency must be
borne in mind. In these situations it is advisable to consult your doctor first.
- It is recommended not to take a bath directly after drinking alcohol or having a meal.
- Use only water from your home network properly treated and disinfected.
- If the water hardness of the installation is very high, it is advisable to install a water softener to
guarantee that the whirlpool equipment is working properly.
- Do not use foam-bath products with the whirlpool since the amount of foam produced could lead
to overflows.
- Parts incorporating electrical components, except remote control devices, must be loca-
ted or fixed so that they cannot fall into the bath.
- Parts containing live parts, except parts supplied with safety extra-low voltage not excee-
ding 12V, must be inaccessible to a person in the bath.
INSTALLATION AND MAINTENANCE
- To guarantee the safety of use of this product, it should only be installed and repaired by qua-
lifyed installers, who can demonstrate to the appropriate authorities awareness and compe-
tence in the application of National Regulatory requirements for safety, i.e. electrical and water
supply/disposal.

3
Index
12
3
4
5
6
ATonic
Premium
B
Total
1Acrylic bathtub
2 Waste
3 Handgrips **
4Headrests **
5 Water Massage
6 Air Massage
7Electronic con-
trol panel
* According to model.
7
5
Index 3
Control panel 4
❚Keypad 4
❚Screen 4
Jets 4
Basic functions 5
❚Stand By 5
❚On 5
❚Lack of water 5
❚Temperature alarm 5
❚Main menu 6
❚Water massage 7
Continuous water massage 7
Pulsating water massage 7
❚Air massage (only Total model) 7
Continuous air massage 7
Pulsating air massage 7
❚Timer 8
❚Final blowing 8
Manual blowing 8
Automatic blowing 8
Advanced functions 9
❚Programs 9
Save program 9
Select program 9
Configuration 10
❚Tutorial mode 10
Troubleshooting 10
Maintenance 11
Disposal of electric
and electronic products 12

4
❚Screen
Minus key Plus key
Multifunction key
Function indicator
zone
Level indicator zone
❚Keypad
Control panel
Jets
Position of the jets

5
1 2
Basic functions
❚Stand By
It is the default mode of the bathtub when it has not active functions.
❚On
If there is not any active functions reverts to Stand by mode, after a minute or press this key during two seconds.
❚Lack of water
❚Temperature alarm
Bip
1 Pulsations
Add cold water for solution.
2"
OK
12
BIP will turn off but
not the message
screen.

6
❚Main menu
Once functions selected, these functions are displayed in the main menu. If the indicated level is "0" the function is not active. The
active functions are only displayed on the screen.
Press this key during two seconds to stop all functions.
The screen stays on along one minute, during this time it is possible to initiate any function without turning on the bathtub again. If
after a minute a function is not selected, the screen returns to stand by mode.
Functions activation sequence:
Continuous water
massage
Pulsating water
massage
Pulsating air massage
(only Total model)
Massage time
Continuous air massage
(only Total model)

7
❚Water massage
During the bath you can enjoy the water massage function, a water massage produced by mixing water and air jets coming out of
the bathtub.
Continuous water massage
Pulsating water massage
During the bath you can enjoy a massage produced by small air bubbles rising from the holes in the bottom of the bathtub.
Continuous air massage
Pulsating air massage
123
Available levels
* disabled
5
4
3
2
1
0 *
1 2 3
Available levels
* disabled
5
4
3
2
1
0 *
1 2 3
Available levels
* disabled
5
4
3
2
1
0 *
1 2 3
Available levels
* disabled
5
4
3
2
1
0 *

8
❚Timer
All activate functions come to and end when the message "Time Out" appears intermittently on the screen together with an
acoustic signal.
Bip
To exit the "Time Out" press this key or wait 5 "and return to the main menu.
❚Final blowing
This is the procedure of emptying stagnant water from the air circuit. You must perform this process after every bath / shower, once
the bathtub is empty.
Manual blowing
4"
Automatic blowing
10'
After 10 minutes emptying the bathtub after using the whirlpool, it automatically activates the blowing process, if not previously
done manually blowing.
1 2 3
Time
20
15...
10...
5...
2...
1
1 2 3
1 2
3
Stand by

9
❚Programs
Save program
The levels of functions selected are saved.
Use preset levels
Select program
2 Pulsations(<1s)
Advanced functions
1 2
+2"
1 2
3 4 5
Programs
4
3
2
1
Main menu
Programas
RELAX
FUN
4
3
2
1
0 off
34

Set Time Max. and min. levels
pulsating air massage
12
34
6 7
Max. and min. levels
pulsating water massage
activación
Blowing to empty air
circuit water
5
Tutorial mode
7
10
+2"
It returns to main screen if you do not press any key during ten seconds or press the key during two seconds.
❚Tutorial mode
It is the demo mode which sequentially activates all functions of the bathtub.
You can interrupt the tutorial mode in any time by pressing this key during two seconds.
Problem Possible cause What to do
The screen does not light.
Failure in electricity supply.
Magnetothermal switch has cut
out.
Check mains supply voltage.
Set them to circuit closed position (ON). If they cut out again, contact the
Roca Technical Service.
None of the functions switches
on. Insufficient water in the bathtub. Fill the bathtub.
If the detected anomaly is not resolved with this information, please contact the Roca Technical Service.
Troubleshooting
Configuration
(Only TOTAL
massage models)
(Bathtub must be empty)
(Only TOTAL massage models)