Rocker WaterVac 100 User manual

WaterVac 100
WaterVac 100 - MS
WaterVac 100 - MB
WaterVac 101 - MB
Vacuum Filtration System

⚫Please study this instruction manual carefully before using this product.
⚫Please discard packing material according to local related regulations.
⚫Please make sure the supply voltage and frequency conform to power specified on
main unit.
⚫Please operate the instrument in well ventilated areas and keep away from
inflammables.
⚫This product is not corrosion-proof. Please do not pump acid, base or organic vapors
or gases directly.
⚫Do not pump dirty or impure solution before filtration to avoid clogging this product.
⚫In case of any questions in using this product, please make sure to contact your local
distributor for help. Do not do any improper assembly or disassembly without
authorization.
⚫Please clean and maintain the instrument and accessories according to the
maintenance method after every use.
⚫For more product details, please refer our latest catalog and company website.
Carefully check if the shipping carton is in good condition before unpacking.
Please check all supplied items according to standard package list. If you have any
questions, please keep serial no. & shipping carton and contact your local dealer
for help.
Unpacking
Important Notice

WaterVac 100-MS
WaterVac 100-MB
WaterVac 101-MB
Model
Assembly
WaterVac 100-MS
Silicone stopper adaptor + WaterVac 100 Main unit +
#8 Silicone stopper + Power adapter + 200 cm
Silicone tube + Kit + Instruction manual
Model
Assembly
WaterVac 100-MB
SS Spin-lock support base + WaterVac 100 Main unit
+ Power adapter + 200 cm Silicone tube + Kit +
Instruction manual
Model
Assembly
WaterVac 101-MB
SF Stainless steel funnel 100ml + SS Spin-lock support
base + WaterVac 100 Main unit + Power adapter +
200 cm Silicone tube + Kit + Instruction manual

Model MS
Model MB
Installation Example and Operation
Funnel
Membrane
Membrane
support
Funnel
Membrane
#8 silicone
stopper
Support base

WaterVac 100 Operation
1. Make sure that funnel adaptor is
screwed into main unit properly;
tighten fixing screw with L-Type
hex key (2mm) to prevent
support base from rotation.
2. Make sure that transformer is
plugged into power socket
tightly; both ends of silicone
tube are connected to outlet and
drain tank respectively.
1. Make sure that membrane is
placed on support base properly
then press power button to
begin filtration process.
2. Press power button to stop
operation once filtration is
finished.
3. Please suck in pure water to
clean the tubing after every use.
Keep running pump for one
more minute after water is
cleaned out to ensure the
remaining water is completely
drained.
** Caution:
⚫Do not bend silicone tube or squeeze it with heavy objects to avoid poor drainage.
⚫Do not pump dirty or impure solution before filtration to avoid clogging or damaging.
Power Button
Fixing Screw
L-Type Hex Key 2mm
Power Socket
Outlet

Funnel Adaptor
190100-10
Silicon Stopper Funnel Adaptor_Short:
Compatible with various kinds of filter holders
with #8 silicone stopper
180300-30
Rocker SF Stainless Steel Funnel Adaptor:
Fitting to Rocker SF funnel available for instant
flame Sterilization and Pall 4870 (100ml),
4871(250ml) plastic funnel.
190100-73
Adaptor for Millipore 100/250ml plastic funnel
(Microfil®disposable plastic funnel)
190100-74
Adaptor for Sartorius 16A07 plastic funnel
(Microsart® disposable plastic funnel)
190100-75
Adaptor for Pall 4870 (100ml), 4871(250ml)
funnel (Sentino®disposable plastic funnel)
190100-76
Hose barb adaptor (for Ø4-8mm tubing)

1. This product is not autoclavable. Please clean the case by pure water or 75% alcohol.
2. It is strongly recommended to replace O-ring of funnel adaptor once every year at least
to keep good aspiration.
3. Silicone tubes are consumables; please replace at least every half year to ensure good
drainage.
Problem
Reason and Solution
Instrument fails to
start
Check if the power supply conforms to power specified on main
unit.
Check if the power button is pressed properly.
Switch is broken →back to local dealer.
Poor vacuum
Check if outlet is blocked.
Funnel adaptor O-ring is broken →replace the O-ring
Inner tube leakage →back to local dealer.
Internal wiring loose →back to local dealer.
Low filtration speed
1. Check if the connection between funnel and funnel adaptor is
tightly sealed.
Check if membrane specification is proper.
Check if membrane is blocked →replace membrane
Funnel adaptor O-ring is broken →replace the O-ring
2. Silicone tube is bent too much →replace silicone tube
Internal wiring loose →back to local dealer.
Troubleshooting
Maintenance

190110-01(02)
WaterVac 100 - MS, Vacuum Filtration System with No. 8 Stopper
Funnel Adaptor, AC 100~240V Adaptor, US Plug (EU Plug)
190120-01(02)
WaterVac 100 - MB, Vacuum Filtration System with Rocker SF
Funnel Adaptor, AC 100~240V Adaptor, US Plug (EU Plug)
190121-01(02)
WaterVac 101 - MB, Vacuum Filtration System with Rocker SF
Funnel Adaptor, 100 ml SF Funnel, AC100~240V Adaptor, US Plug
(EU Plug)
190100-10
Silicone Stopper Funnel Adaptor_Short, compatible with various
kinds of filter holders with No.8 silicone stopper
180300-30
SS316 Adaptor for Rocker SF funnel
190100-73
SS316 Adaptor for Millipore 100/250ml plastic funnel
190100-74
SS316 Adaptor for Sartorius 16A07 plastic funnel
190100-75
SS316 Adaptor for Pall disposable plastic funnel
190100-76
SS316 Hose barb for silicone tube, ID4~ID8
180100-31
SF Stainless Steel Support Screen
180100-01 / 03 / 05
100 ml / 300 ml / 500 ml SF Stainless Steel Funnel
200300-01
MF 3, 300 ml Magnetic Filter Holder
200500-01
MF 5, 500 ml Magnetic Filter Holder
167100-20
PALL, Type A/ E Glass Fiber Discs, 1 um, 100/PK
167100-52
PALL, GN-6 Metricel Membrane Disc Filter, grid (100/PK)
Rocker Scientific Co., Ltd. / www.rocker.com.tw / [phone] / RO-190100-EN202004-A01
Ordering Information