Rocket Fish RF-WHD200 User manual

4-Port WirelessHD Kit
RF-WHD200
User Guide
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 1 Thursday, November 18, 2010 1:47 PM

2
Rocketfish RF-WHD200
4-Port WirelessHD Kit
Contents
Safety information .......................................................... 3
Features............................................................................... 4
Setting up the transmitter and receiver.................. 8
Specifications..................................................................15
Troubleshooting ............................................................18
Legal notices ...................................................................19
Warranty ...........................................................................21
Introduction
Congratulations on your purchase of this high-quality Rocketfish
system, which represents the state of the art in 60 GHz wireless
transceiver design, and gives you complete freedom while enjoying
your music or movies without the limitations of cables.
The system has a non line-of-sight transmission range of up to 33 feet
(10 m), and can be used with your HDMI-compatible home theater
components, gaming systems, or computer.
This User Guide explains how to correctly install, operate, and get the
best performance from your WirelessHD kit. Read this guide carefully
before installing your system, and then keep it handy for quick
reference.
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 2 Thursday, November 18, 2010 1:47 PM

3RF-WHD200
Safety information
Warning: To reduce the risk of fire or electric shock, do not expose the included
devices to rain or moisture.
Caution: To reduce the risk of electric shock, do not disassemble any component of the
kit. There are no user-serviceable parts inside. Refer servicing to qualified service
personnel.
• Read these instructions.
• Keep these instructions.
•Heedallwarnings.
• Follow all instructions.
• Do not use the included devices near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 3 Thursday, November 18, 2010 1:47 PM

4
• Only use attachments or accessories specified by the manufacturer.
• Unplug the included devices during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required
when a component of the kit has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
• The included devices shall not be exposed to dripping or splashing and
no objects with liquids such as vases, shall be placed on the apparatus.
• The AC power adapter is used as the disconnect device. This disconnect
device shall remain readily operable.
• Read the rating labels on the bottom of the base station and wireless
speaker for power input and other safety information.
Features
Package contents
The box should contain:
• 60 GHz WirelessHD transmitter (1)
• 60 GHz WirelessHD receiver (1)
• Mounting bracket for receiver (1)
•HDMIcables(2)
• AC power adapter (2)
•Remotecontrol(1)
•QuickSetupGuide
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 4 Thursday, November 18, 2010 1:47 PM

5RF-WHD200
Transmitter front/top panel
Receiver front/top panel
Item Description
1 Power and link status indicator (green)
Blinking—The power is connected and the transmitter is turned on.
On—The transmitter and receiver are linked.
Off—The power is off.
2HDMI 4—When the indicator is on (green) the HDMI port is in use.
3 HDMI 3—When the indicator is on (green) the HDMI port is in use.
4HDMI 2—When the indicator is on (green) the HDMI port is in use.
5 HDMI 1—When the indicator is on (green) the HDMI port is in use.
Item Description
1 Power and link status indicator (green)
Blinking—The power is connected and the receiver is turned on.
On—The transmitter and receiver are linked.
Off—The power is off.
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 5 Thursday, November 18, 2010 1:47 PM

6
Transmitter back panel
Receiver back and side panels
Item Description
1 DC IN jack—Connect the power adapter to this jack.
2Power switch—Turns the transmitter on or off.
3 HDMI/WVAN switch— A quick press (<1 second) toggles the HDMI switch input to select the next HDMI input.
A long press (>3 seconds) toggles WirelessHD output between one or more WirelessHD receivers in the same
room. See “Setting up a Wireless Video Area Network (WVAN)” on page 11.
4HDMI 1 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
5 HDMI 2 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
6HDMI 3 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
7 HDMI 4 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
Item Description
1 HDMI jack—Connect one end of an HDMI cable to this jack and the other end to your TV or projector.
2DC IN jack—Connect the power adapter to this jack.
3 Power switch—Turns the receiver on or off.
4Cable routing clips - Insert HDMI cable into these clips for receiver placement stability.
Right side view Back view Left side view
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 6 Thursday, November 18, 2010 1:47 PM

7RF-WHD200
Remote control
Note: Remove the plastic film from the remote control before using it for the first time.
Make sure you point the remote control at the WirelessHD transmitter.
Item Description
1 SLEEP button - Press to turn the transmitter and receiver on or off.
2-5 HDMI 1-4 - Press to select the HDMI port for the signal source of your choice.
Wireless HD Transceiver
HDMI 1
HDMI 4HDMI 3
HDMI 2
SLEEP
Wireless HD Transceiver
HDMI 1
HDMI 4HDMI 3 HDMI 2
SLEEP
Plastic film
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 7 Thursday, November 18, 2010 1:47 PM

8
Setting up the transmitter and receiver
Mounting the receiver on a wall
(optional - can also be placed on a flat, shelf-like surface)
To mount the receiver on a wall:
1Drill holes through the mounting bracket into the wall where you want
to mount your receiver.
2Use a screwdriver to secure the mounting bracket to the wall.
Note: Drywall installations may require drywall anchors (not included) for a secure
mounting.
3Mount the receiver onto the mounting bracket.
Mounting slot
Mounting bracket
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 8 Thursday, November 18, 2010 1:47 PM

9RF-WHD200
Connecting the transmitter and receiver
To connect the transmitter and receiver:
1Set up the transmitter and receiver. Refer to the following setup
diagrams to arrange your transmitter and receiver. We recommend that
the transmitter and receiver face each other for the best performance.
Top view
Side view
Receiver
Receiver
Transmitter
Transmitter
Floor
82°
82°
47°
47°
16.4 ft. (5 m)
16.4 ft. (5 m)
16.4 ft. (5 m)
16.4 ft. (5 m)
32.8 ft. (10 m)
32.8 ft. (10 m)
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 9 Thursday, November 18, 2010 1:47 PM

10
2Connect the media sources, such as a Blu-ray/DVD player, cable/satellite
box, or gaming console to the transmitter with HDMI cables.
3Connect the display device, such as a TV or projector, to the receiver with
an HDMI cable.
Transmitter
Computer
HDMI cable
Game console
Receiver
Display devices
HDMI cable
OR
10-0766 RF-WHD200_MAN_ENG_V1.fm Page 10 Thursday, November 18, 2010 1:47 PM